21 May 2024, 19:53 | #1 |
Registered User
Join Date: Apr 2013
Location: Norway
Posts: 258
|
44-pin IDE pin header for A600/A1200 part number
I’m shopping some stuff from DigiKey (capacitors etc) , but I also need the pin header for the ide interface for the a1200. (Capacitors have puked on some of the pins).
Is this a non standard part which is not available at for example DigiKey? I found some 44 pin headers, but I think they probably are wider. |
21 May 2024, 21:47 | #2 |
Hardware Designer
Join Date: Aug 2018
Location: Bialystok/Poland
Age: 51
Posts: 180
|
It is a generic part. Look for 2×22 pin, straight, through hole header, 2.00 mm pitch. DigiKey has a wide selection of them, for example https://www.digikey.pl/en/products/d...21121/16608605
|
25 May 2024, 23:41 | #3 |
Registered User
Join Date: Apr 2013
Location: Norway
Posts: 258
|
Awesome. Thanks a lot!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Amiga 500 Pin Header Part Number | spawnerbr | support.Hardware | 5 | 30 September 2022 16:42 |
Long 44 pin ide cable | Dustyarddog | support.Hardware | 13 | 28 January 2020 11:32 |
44 pin ide edge connectors | xraynorm | support.Hardware | 3 | 02 February 2019 21:43 |
Running multiple drives/Devices on 44-Pin IDE - Amiga 1200 | antiriad76 | support.Hardware | 8 | 28 December 2017 00:58 |
Cheap A1200/A600 internal 44-pin CF adapters | alexh | MarketPlace | 7 | 01 September 2008 23:15 |
|
|