![]() |
![]() |
#1 |
Registered User
Join Date: Sep 2023
Location: England
Posts: 36
|
![]()
If I dd my rdb .hdf (WB 3.1, ffs formatted) onto an SD card, I can mount it rw under Linux but I have not had any luck mounting the .hdf without dd'ing onto a SD card first. I've spent most of tonight messing with mount (with and without using a -o offset value in bytes that I got from parted) and losetup with no success. Most of the guides I've found online only cover mounting a physical disk under Linux and don't cover how to mount a (rdb) .hdf file.
Also, what is the correct procedure to backup and restore an affs formatted SD card under Linux? I tried doing it with dd but my restored SD card failed to boot on my A600. I'd like to see the answers to these questions get added to the FS-UAE FAQ, I'm surprised they aren't covered already. Thanks Amigans! Last edited by danboid; 01 February 2024 at 00:35. |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2023
Location: England
Posts: 36
|
Here's one guide that claims to do what I want but it doesn't work for me
http://www.andremiller.net/content/m...ns-using-linux Where's the script to automate this process, the working process that is? |
![]() |
![]() |
#3 | |
Registered User
Join Date: Jan 2015
Location: australia
Posts: 585
|
Quote:
That has nothing to do with amiga drives/partitions... try this -> https://gareth.halfacree.co.uk/2013/...es-under-linux |
|
![]() |
![]() |
#4 | |
Registered User
Join Date: Sep 2023
Location: England
Posts: 36
|
Quote:
Yep, I found that and you'll note that it only deals with mounting a physical disk. I want to mount a rdf format .hdf file, formatted with affs. Those steps do not work for me under Debian Linux but I can mount a SD card using the same format. Because my .hdf only has one partition, I do not even need to specify an offset to mount it after dd'ing it onto a SD card but I want to cut that step out so that I can customize my install. I want to install fat95, the compact flash drivers, lha, whdload and xfs mainly. I'm sick of re-installing them every time my disk gets trashed which happens all too easily. I'm sure there will be a way to duplicate my SD card under AmigaOS once I've customized it but I want to know how to do that bit under Linux which would seem like the better way to do it to me. dd didn't work for me but I probably didn't use the correct options when creating or restoring my disk image, if we can use Linux dd for this? Last edited by danboid; 01 February 2024 at 08:43. |
|
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2015
Location: australia
Posts: 585
|
Doh!.... my bad, forgot all about hardfile..... https://github.com/captain-amygdala/...g-a-shared-HDF
...about step 15 onwards is where I walked in on it, using debian12 amd64 (presuming parted is installed)... works, just tested it... Code:
(parted) u b (parted) p Model: (file) Disk /home/gcb/Amiberry/hdf/workbench-135.hdf: 3145728B Sector size (logical/physical): 512B/512B Partition Table: amiga Disk Flags: Number Start End Size File system Name Flags 1 1034240B 3102719B 2068480B affs1 DH0 boot (parted) quit root@gallah:/home/gcb/Amiberry/hdf# mount -t affs -o offset=1034240,sizelimit=2068480,setuid=1000,setgid=1000 workbench-135.hdf /tmp/1 root@gallah:/home/gcb/Amiberry/hdf# ls /tmp/1 AmigaBASIC BasicDemos.info Disk.info Expansion FD1.3.info libs Prefs Shell System.info Tools.info Utilities AmigaBASIC.info c Empty Expansion.info fonts PCUtil Prefs.info Shell.info t Trashcan Utilities.info BasicDemos devs Empty.info FD1.3 l PCUtil.info s System Tools Trashcan.info |
![]() |
![]() |
#6 |
Registered User
Join Date: Sep 2023
Location: England
Posts: 36
|
Thanks giantclam!
Yes, that mount command works with my rdb .hdf file. None of the posts or guides I found yesterday mentioned having to use the sizelimit mount option. I shall see if I can get the fs-uae maintainers to put that command somewhere where its easier to find because its very useful and I didn't come across that guide you linked in your previous post, plus it was buried quite deep within it. I will have to have another go at using dd to try backing up my Amiga SD card. I reckon it will be a similar procedure where I'll have to specify the exact size of the partition to dd instead of just backing up and restoring the whole disk, although I'm unsure why that didn't work for me last time I tried it. |
![]() |
![]() |
#7 |
Registered User
Join Date: Sep 2023
Location: England
Posts: 36
|
I have sent this email to the FS-UAE maintainer:
Hi Frode I would like to see the process for mounting (affs) .hdf files under Linux documented somewhere thats easy to find on the FS-UAE site because its not at all obvious how to do it but its very useful. I never owned a HD for any of my Amigas back in the 90's but I've started using the Amiga again recently and now I have a IDE SD card adapter and I've been disappointed to see how easy it is to trash AmigaOS so that it becomes unbootable, leading to frequent re-installs. I got sick of having to install all of the libraries and tools required to use my SD card and load and run software (lha, xfs, WHDload, fat95, dopus, cfd etc etc) over and over and so it seemed the best way to fix this was to mount my WB .hdf, copy the programs into it, set them all up and then I can easily backup and restore the fully configured .hdf file but I could not find the correct mount command after hours of searching last night. Thankfully EAB came to my rescue: https://eab.abime.net/showthread.php?t=116826 I would suggest we add the instructions to mount a (affs formatted) .hdf file under Linux to either: https://fs-uae.net/docs/linux Which is totally empty at present so that seems like an ideal place to put this info or: https://fs-uae.net/docs/faq If you would like me to take those instructions from the forum and rewrite it in an easier to read manner for your site I'm happy to do that. Thanks |
![]() |
![]() |
#8 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,955
|
You could do it much easier without looking up any offsets. losetup -P asks the kernel to probe the partition table of whatever image you are mounting via loop.
Code:
jope@o790:/tmp$ sudo losetup -Pf tero.hdf jope@o790:/tmp$ losetup -l NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO LOG-SEC /dev/loop0 0 0 0 0 /tmp/tero.hdf 0 512 jope@o790:/tmp$ sudo dmesg | grep loop0 [17288785.602481] loop0: detected capacity change from 0 to 2059140 [17288785.603033] loop0: RDSK (512) p1 (DOS^A)(res 2 spb 1) p2 (DOS^A)(res 2 spb 1) p3 (DOS^A)(res 2 spb 1) p4 (DOS^A)(res 2 spb 1) p5 (DOS^A)(res 2 spb 1) jope@o790:/tmp$ lsblk /dev/loop0 NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS loop0 7:0 0 1005.4M 0 loop ??loop0p1 259:0 0 40.7M 0 part ??loop0p2 259:1 0 70.2M 0 part ??loop0p3 259:2 0 291.7M 0 part ??loop0p4 259:3 0 300.2M 0 part ??loop0p5 259:4 0 301.3M 0 part jope@o790:/tmp$ sudo mount -t affs -o ro /dev/loop0p1 /mnt jope@o790:/tmp$ ls /mnt C Expansion L Preferences.info Snap.pic T Utilities side Classes Expansion.info Libs Prefs Storage Tools Utilities.info Data2 FileMaster Locale Prefs.info Storage.info Tools.info WBStartup Devs FileMaster.info MonitorStore Rexxc System Trashcan Wbstartup.info Devs.info Fonts Preferences S System.info Trashcan.info disk.info jope@o790:/tmp$ sudo umount /mnt jope@o790:/tmp$ sudo losetup -d /dev/loop0 |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mounting AmigaOS 3.1 FFS partitions on Linux | Polom | support.Other | 10 | 23 September 2021 06:32 |
Mounting .hdf files from Linux side? How? | Hercules | support.OtherUAE | 5 | 13 January 2020 10:48 |
Do the LITE or FULL HDF files require RDB Mode? | Foebane | project.ClassicWB | 11 | 28 April 2018 18:19 |
Mounting HDF with RDB in GNU/Linux | Gaula92 | support.Other | 0 | 25 August 2016 12:04 |
FFS, RDB and autobooting questions | mark_k | Coders. System | 2 | 19 February 2013 13:59 |
|
|