|
03 March 2017, 13:14
|
#1 |
|
Posts: n/a
|
Amiga 2000 Corrosion - Replacement Parts Qs
I opened up my old Amiga a couple of weeks ago to find the battery had leaked and corroded several components. I'm getting a black screen when I try to power on.
I've order replacements for the parts I recognize, but there's a few I'm unsure of.... My board is Rev 6.2. Can anyone tell me the specs or where to order the following: RP101 FB301 Thanks |
|
03 March 2017, 14:10
|
#2 |
|
Registered User
Join Date: Jun 2009
Location: Dublin, then Glasgow
Posts: 6,335
|
RP101 appears to be a resistor pack - 9x2.7K resistors in a 10-pin pack with the common connection at pin 1. It should be pretty easy to find at any electronics supplier.
FB301 is a ferrite bead. The schematics don't say what ratings it should have but I doubt it will be that critical as it just does some extra filtering of the +5V for the keyboard. You could probably get away with replacing it with a piece of wire, or else a small bead, perhaps 75 ohm or less will do the job. Edit: These look to be suitable replacements, though I can't guarantee it... Resistor pack Ferrite bead Last edited by Daedalus; 03 March 2017 at 14:19. |
|
|
03 March 2017, 15:09
|
#3 |
|
Posts: n/a
|
Thanks! I was just about to post that exact resistor pack and a very similar ferrite to ask if they are correct. Seems like they are!
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Some 3D Printing Replacement Parts | Tommes | Amiga scene | 48 | 27 July 2016 13:43 |
| FS: Amiga Parts | shuttlepilot | MarketPlace | 4 | 26 April 2016 18:27 |
| Bad capacitor corrosion example | kipper2k | Hardware pics | 13 | 17 May 2014 17:04 |
| Corrosion/battery leak! Advice needed! | Fingerlickin_B | support.Hardware | 30 | 11 December 2008 03:54 |
| WTS: Amiga 2000 hd for parts | diddydonn | MarketPlace | 13 | 27 July 2007 05:48 |
|
|
