Kipper2k CD32 Riser - RGB (DB23) and PC Keyboard (PS/2) Ideal for TF328

[Amiga1992]

Yeah I read that, but it is kind of confusing, doesn't really recommend one tool over the other!
From what I read there, I downloaded Meshmixer. Seemed like the one most suited to work with models related to 3D printing.

I will hopefully get to progress some with this and make a cover I can share with everybody! The main problem in my mind right now is that -several- revisions of the kipper adapter have been made, and mine is bigger/different shape than the one you sold. I wanna see if there's a lid I can make that covers all.

[kgc210]

Originally Posted by Akira

I wanna see if there's a lid I can make that covers all.

That might be pretty tricky if the DB23 connector has moved etc

[Amiga1992]

Originally Posted by kgc210

That might be pretty tricky if the DB23 connector has moved etc

Indeed it has, mine even has a (useless) SCART connector and thePS/2 connector (also useless) is located elsewhere, and the PIC is smaller

But I think if you leave the top exposed, you can still cover the rest, provide stability and prevent accidental shortages.

I can only try. If all fails, I'll make two versions.

[EzdineG]

Originally Posted by Akira

kgc2010, I have no idea what you'd use to open those files, extension is STL, any ideas? Would indeed be a good starting point, at least to get the measures to the case right.

Just to chime in here, I used Blender to make rudimentary edits to the STL files Jim Drew put up for the Wimidem232 and was able to print the results with little issue.

Took about 10 mins to come to grips with the editor, but it makes sense after a bit.

[sir_leon]

Hi, I bought the version without keyboard adapter.
I would like to add the PIC and the PS / 2 port but I can't find any information about it.
Can you help me?

[RetroPassionUK]

Originally Posted by sir_leon

Hi, I bought the version without keyboard adapter.
I would like to add the PIC and the PS / 2 port but I can't find any information about it.
Can you help me?

try here, you will need to program the PIC btw...

https://www.exxoshost.co.uk/forum/viewtopic.php?t=1576

[sir_leon]

Hi, the components have arrived and now I can try to install them on the board.
But I realized only now that on the board there is also a capacitor called "IC1" right next to the pins for the PIC.
Is the component necessary? Maybe someone can tell me which ones he would go there?

THANKS IN ADVANCE!