![]() |
![]() |
#1 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,654
|
![]()
I'm getting this:
![]() A1200 1D.1, Microbotics XA1230 030@50+68882@50+64MB, KS3.0, DCE sd/ff 64MB tested and passed all tests, so it's not that (unless it's wrong memory speed, I set it at 70ns) Only seems to be happening on Workbench... "Insert disk balhbalh"requesters also have some slight gfx corruption. Problem seems to be inside windows (corrupted ASL library?) I am running Visualprefs, Fblit and NewIcons. Perhaps its one of those? But it didnt use to happen. Also, on WinUAE, it doesnt happen, using the same config. Any clues? |
![]() |
![]() |
#2 |
BlizzardPPC'less
|
Have you tried without SD/FF? Or do you have another accelerator card to test it with?
|
![]() |
![]() |
#3 |
Targ Explorer
|
try editing out FBlit from your Startup-sequence.
|
![]() |
![]() |
#4 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,654
|
I'll try it without SD/FF and without FBlit, then report here!
ISsue is, after a few times of closing and opening again this app, I get a recoverable alert, and then a system freeze. |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,654
|
It's still doing it without the SD/FF
This looks like a typical case of memory corruption, but I ran a test on the memory yesterday, and it passed all tests. Could it be the memory speed I set it at? How do I know what speed my stick is? |
![]() |
![]() |
#6 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,654
|
Still talking to myself here.. :P
When booting *without a startup sequence", it runs OK. So there's something there messing it up. |
![]() |
![]() |
#7 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,654
|
More talking to myself!!!!!!!!!!
It's something to do with IPrefs. I commented it out and no more corruption. Some of the settings I have must be corrupting memory. Stuff running from startup sequence: PatchControl PatchOpenWB FBlit IPrefs ConClip Visualprefs CAPrefs |
![]() |
![]() |
#8 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,654
|
Things on my WBStartup:
MULTI CX RTPatch MagicMenu ToolManager |
![]() |
![]() |
#9 |
Miggy Ate My Hamster!
Join Date: Nov 2008
Location: Lancashire, UK
Posts: 1,566
|
This may sound stupid? but have you tried cleaning all the contacts on the memory simm and the Microbotics card?
My expansion board was very glitchy when i first installed it but worked fine after cleaning all the connectors with Isopropyl (rubbing alcohol) and cotton buds..... it cleaned off all sorts of micro-crap and then worked fine ![]() ![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Sep 2005
Location: taunton.som.uk
Age: 73
Posts: 681
|
Could it be the memory speed I set it at? How do I know what speed my stick is?[/quote]
its on the chips marked as xxxx-6 or 60 xxxxx-70 also on the sticker , if theres is 1. |
![]() |
![]() |
#11 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,654
|
It can't be the contacts because, as I said (read all my babble please
![]() So something is conflicting with IPrefs, or IPrefs is corrupt, or something. |
![]() |
![]() |
#12 |
Cat lover
Join Date: May 2004
Location: Italy
Age: 54
Posts: 804
|
I report here what I found in Amiga resources:
- under Kickstart 3.1 the RAM is autoconfigured, under 3.0 it's configured by software Your picture above shows a configuration utility, but are you sure that the configuration software is executed in the startup-sequence? I hope this can help you. |
![]() |
![]() |
#13 |
Registered User
Join Date: Apr 2008
Location: wolverhampton
Posts: 51
|
hi there - I have the same accelorator in my 1200 and used to have the same problem... I fixed it by doing two things - First up I tried the doing the timing fixes to my motherboard, that fixed the random crashing problem I was having but still had courpt graphics on the XA config program... so the second thing I did was look for an alternative config program on aminet - AUTOXA is the tool I found. I use that in my WBstartup drawer and everything is fine. I am guessing that original config tool is buggy and causes conflicts or issues somehow.
|
![]() |
![]() |
#14 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,654
|
I saw some graphic corruption in SYSTEM REQUESTERS TOO, not just that software.
As I reported, the problems go away when I disable IPrefs. Also, AutoXA is only for adding memory to the system, NOT for setting up the card's configuration. There's no replacement for that. |
![]() |
![]() |
#15 |
Doogster
Join Date: Dec 2007
Location: Dorset
Posts: 1,069
|
would have thought thats all you would need it for.
|
![]() |
![]() |
#16 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,654
|
Huh?
|
![]() |
![]() |
#17 |
Doogster
Join Date: Dec 2007
Location: Dorset
Posts: 1,069
|
adding ram...it's not like the 030 needs special configuration.
|
![]() |
![]() |
#18 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,654
|
It's for specifying the RAM's speed and the FPU type and speed, as well as other bits and bobs.
The question of this thread has no relevance to the setup tool anyway, I said I saw graphical corruption on a system requester too, after iPrefs is loaded. Any help?????? |
![]() |
![]() |
#19 |
I hate potatos and shirts
|
@Akira:
I use to have the 1230XA, myself. It is a great card with capacity to use up to 128Mb SIMM (which I had, too ![]() I cure the problems doing the hardware mods (Ian pointed the mods to >=040 CPU and 1D3 boards onwards) and running Fblit in exclude mode to avoid SETXA graphics on fast-mem. When I changed the 3.1 ROM to a custom made 3.9 all problems was solved for good. |
![]() |
![]() |
#20 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,654
|
Rkauer, I will need help from you on this.
I will have to investigate that exclude mode... time to RTFM of Fblit! :P |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
a (silly?) question about graphic cards on A1200 | loth77 | support.Hardware | 19 | 15 January 2012 15:37 |
A1200 Graphics Corruption | darkwave | support.Hardware | 10 | 07 November 2011 18:10 |
Fighter Duel Pro Graphic Corruption | formater | support.Games | 0 | 08 June 2007 20:38 |
WinUAE graphic corruption? | Critter | support.WinUAE | 13 | 08 February 2004 14:13 |
Workbench disks for A1200 | ganymedecluster | support.Hardware | 9 | 10 August 2001 13:49 |
|
|