![]() |
![]() |
#1 |
Registered User
Join Date: Dec 2018
Location: England's green and pleasant lands
Posts: 10
|
A600 - dead floppy or something else?
My dad found a boxed A600 in a charity shop, and I've been trying to get it going ever since. Unfortunately, I really don't know anything about this system so I figured I'd come here before doing anything drastic.
The first time I started it up, I put in the Workbench disk it came with (1.3, if it makes a difference - and a bit weathered, too) and it started to load, but then threw a disk read error. Right, that must just be a dead disk, then. So I ordered some new ones from AmigaForever - who I understand are a little disliked, but hey, new disks innit - and in the meantime, I tried some of my other disks and see if they'd boot. Now each time I try a new disk, including the Workbench 1.3 disk, the screen goes blank purple, then shows the 'insert a disk' animation again. I've given the floppy drive a proper clean, and blown out some of the dust and echoes, but it still won't have it. This also happens with the new WB 1.3 disks. I also got some 3.1 disks, but my understanding is that they won't work unless I also have Kickstart 3.1...? Not that they'll work anyway at the moment, but still. Do I just need a new drive, or am I digging in the wrong place? |
![]() |
![]() |
#2 |
Settler
Join Date: Feb 2007
Location: Serf City
Posts: 1,760
|
Hi there
I had these symptoms before and the problem was caused by the power supply brick having problems. Do you have a spare to try? |
![]() |
![]() |
#3 |
Registered User
Join Date: Dec 2018
Location: England's green and pleasant lands
Posts: 10
|
Unfortunately I don't, and since it's a non-standard connector I can't just plug any old kettle lead in there. Anything else I can try to test this theory?
|
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2013
Location: Liverpool
Posts: 2,608
|
Sounds like the other disks are not being detected
(screen goes purple, then shows the 'insert a disk' animation again.) How is the disk detect switch ? Also Workbench 3.1 will 'Sort of' work on KS 2 But anything that uses 3.1 Libs etc will fail (eg MultiView). Last edited by Nobby_UK; 12 April 2020 at 23:44. |
![]() |
![]() |
#5 | |
Registered User
Join Date: Dec 2018
Location: England's green and pleasant lands
Posts: 10
|
Quote:
I'll check that out when I get chance. Is that inside the floppy drive? (And is it the thing they're referring to in this thread?) In the meantime, a slight development: with my Cloanto WB1.3 disk, if I insert it before powering on the Amiga, I get a red and black error saying Code:
Software Failure. Error: 8000 000B Task: 000026D0 EDIT: One other thing I should probably mention - when I received it, there was a disk already in the drive. I suspect that disk had been there for quite some time, so might that have caused a bit of damage when it's been moved around, stored, etc.? Last edited by Spacefarer; 30 December 2018 at 22:16. |
|
![]() |
![]() |
#6 |
Registered User
Join Date: Dec 2018
Location: Cambridge
Posts: 17
|
I was in the same boat..
Clean the heads of the floppy drive - (alcohol and cotton swabs) the lid of the floppy drive comes off very easily and swab the heads gently. put some oil on the worm gears. I got mine working again, but then bought a Gotek Floppy emulator in the end as 25year old media is quite unreliable. Richard |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2006
Location: Augusta, Georgia, USA
Posts: 558
|
The capacitors related to the floppy (and everything else on the board) tend to leak over time and cause floppy and audio problems. I had to recap both of mine with similar errors to this...
|
![]() |
![]() |
#8 | ||
Registered User
Join Date: Dec 2018
Location: England's green and pleasant lands
Posts: 10
|
Quote:
Thanks for your suggestion, but I've already cleaned out the floppy drive. It was filthy! As much as I love using original media, a Gotek might be the best port of call... Quote:
Yes, I had a feeling that might be a problem. The capacitors looked okay when I opened it up, but to be honest I wasn't checking all that closely. Probably have another look either tonight or tomorrow. |
||
![]() |
![]() |
#9 |
Registered User
Join Date: Dec 2018
Location: England's green and pleasant lands
Posts: 10
|
Okay, I took another look inside. The capacitors on the main board are basically pristine, there's no sign of bulging or leaking whatsoever. I also opened the floppy drive up and tried to clean up more of the gunk, but there really isn't a lot left in there I haven't cleaned.
I'm a bit wary of opening the drive up further, because...well, I'm not so good at getting things back together again ![]() So, my feeling is still that I need a new drive, but there are that many potential issues at play here that it's hard to tell ![]() |
![]() |
![]() |
#10 | |
Registered User
Join Date: Dec 2018
Location: Cambridge
Posts: 17
|
Quote:
Does the machine boot on any disk? The media may be dead and nothing wrong with the drive. Is there a hard drive fitted to boot from? (The A600 has the internal IDE controller) Richard |
|
![]() |
![]() |
#11 | ||
Registered User
Join Date: Dec 2018
Location: England's green and pleasant lands
Posts: 10
|
Quote:
Nope, every disk I have does the same thing. The only one that does anything different is the Cloanto 1.3 disk, which throws a software error (as mentioned above) and that's only when it's inserted before booting. After that, the same thing happens again. Quote:
There is not. I have a few 3.5" IDE HDDs knocking around, but they need molex power so that's a no-go. ![]() |
||
![]() |
![]() |
#12 | |
Registered User
Join Date: Dec 2018
Location: Cambridge
Posts: 17
|
Quote:
You would need WB to boot ![]() I installed a IDE->SD adapter with a 1GB SD card.. |
|
![]() |
![]() |
#13 |
Registered User
Join Date: Dec 2018
Location: England's green and pleasant lands
Posts: 10
|
|
![]() |
![]() |
#14 | |
Registered User
Join Date: Dec 2018
Location: Cambridge
Posts: 17
|
Quote:
There was a bit of a procedure, but it was easy enough in the end. HDTools to set the drive parameters, then partition and then format. All on the Amiga. I think there is a limit of 2GB on size... I tried an 8GB SD card which didnt work. Richard |
|
![]() |
![]() |
#15 |
Registered User
Join Date: Dec 2018
Location: England's green and pleasant lands
Posts: 10
|
That's good to know. Thanks!
|
![]() |
![]() |
#16 |
Registered User
Join Date: Dec 2018
Location: Des Moines, IA
Age: 58
Posts: 88
|
4 GB cards work -- and that's the limit, at least w/o customized scsi.device
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dead A600 floppy drive? | Dastardly | support.Hardware | 4 | 26 November 2017 20:37 |
Dead A600 - And what's THAT?? | LuMan | support.Hardware | 7 | 29 March 2011 23:07 |
Dead A600? | XimeR | support.Hardware | 14 | 28 March 2010 22:07 |
wantend a DEAD A600 board | Amiga-Digital | MarketPlace | 0 | 04 October 2009 12:25 |
A600 power LED dead! | Supamax | support.Hardware | 15 | 05 May 2009 20:42 |
|
|