Wanted Driver for zip 100 drive

sniperchaz · 18 October 2006, 00:20

Is there anyone who has, or knows of,anywhere i can download the drivers for the Iomega ZIP 100 (Parallel)drive as my origanal drivers disk has become corrupt

and IOMEGA nolonger support older operating systems

i have surfed and googled for the last four hours but keep hitting a dead end

and would realy like to get my zip drive installed and working on my miggy if anyone can help could you PM me

thx in advance chaz

poohbear · 18 October 2006, 05:57

In case you don't find another driver disk... If you are lucky, the disk structure could be corrupt, but some of the files that you need might still be intact. You might try dumping the disk block-by-block and then picking out files from the disk image.

However, is this close enough? http://www.amigau.com/zipdrives/aSoftware.html

killergorilla · 18 October 2006, 08:23

If I remember rightly you can't use a parallel zip drive with an amiga.

fryguy · 18 October 2006, 11:45

Well you could use paralell-zipdrive on amiga with a specialmade adapter iirc.

EDIT: Yup se http://main.aminet.net/hard/hack/ppazip.lha

Zetr0 · 18 October 2006, 12:10

aye i remember now, as the amiga is missing a specific programming line it has to pulse another so a line re-route is needed hence either a modified connector OR i am sure you can buy them at one point. hmmm maybe ebay lol

its looking good, not sure how the experimental drivers might go though..

sniperchaz · 19 October 2006, 00:26

poohbear thx for the link unfortunatly redirects me to Iomegas site and they nolonger support the older drivers and yes you can run a zip 100 parallel on an amiga 1200 with the origanal cable as i was doing so upuntill a few weeks ago when i did a fresh instal but found my origanal driver disk has become corupted i dont know about the newer zip drives though as i bought this one a fair few years back specificaly for my A1200 i will have ago at dumping block by block though as i may strike it lucky and thx for the input me old grey matter isnt to sharp these days lol

Zetr0 · 19 October 2006, 00:56

good luck Sniperchaz!

out of curiousity, what was the speed like via the zip100 on the par connector.

sniperchaz · 19 October 2006, 01:22

cant remember off hand but it was a lot faster than parneting just load up the zip unplug it, plug it into my other 1200 and off load it lol if i can get the driver for it and re-install it ill time it for you and let you know

Chain · 19 October 2006, 10:03

it worked without that aminet hack? geez, i must try that, i saw somewhere at storage one old parallel drive.
Let us know if you find drivers.

sniperchaz · 19 October 2006, 20:54

yep noprobs

Zetr0 · 20 October 2006, 01:56

I have a Zip100 Par in store... hell i dont even know if it fires up its been that long LOL... actualy i dont think i have any zipdisks.... LOL

I have to admit i prefered the simplicity of the LS120

sniperchaz · 21 October 2006, 22:18

id just like to get the zip up and running again lol still got 2gigs of files left to transfer to me other miggy and parnet is so slow its worse than snail mail lol

18 October 2006, 00:20	#1
sniperchaz Zone Friend Join Date: Jul 2006 Location: MARGATE UK Age: 62 Posts: 33	Wanted Driver for zip 100 drive Is there anyone who has, or knows of,anywhere i can download the drivers for the Iomega ZIP 100 (Parallel)drive as my origanal drivers disk has become corrupt and IOMEGA nolonger support older operating systems i have surfed and googled for the last four hours but keep hitting a dead end and would realy like to get my zip drive installed and working on my miggy if anyone can help could you PM me thx in advance chaz

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amiga formatted zip disks via USB zip drive in WinUAE?	planetidiot	New to Emulation or Amiga scene	8	02 February 2018 08:43
PC Driver for Joypad wanted.	ma693541	support.Hardware	0	11 February 2012 07:47
Looking for Driver for external LPT ZIP drive	amigoun	support.Hardware	11	04 April 2011 23:56
zip drive ????	lost_loven	support.Hardware	1	28 March 2010 10:56
Skippin driver when the CD-Drive have been removed.	fc.studio	support.Apps	2	19 June 2008 14:27

18 October 2006, 05:57	#2
poohbear Registered User Join Date: Jan 2004 Location: Toronto / Canada Posts: 65	In case you don't find another driver disk... If you are lucky, the disk structure could be corrupt, but some of the files that you need might still be intact. You might try dumping the disk block-by-block and then picking out files from the disk image. However, is this close enough? http://www.amigau.com/zipdrives/aSoftware.html

18 October 2006, 08:23	#3
killergorilla Lesser Talent Join Date: Jan 2003 Location: UK Age: 42 Posts: 7,957	If I remember rightly you can't use a parallel zip drive with an amiga.

18 October 2006, 11:45	#4
fryguy Registered User Join Date: Aug 2005 Location: Skarabörg, Sweden Age: 45 Posts: 1,029	Well you could use paralell-zipdrive on amiga with a specialmade adapter iirc. EDIT: Yup se http://main.aminet.net/hard/hack/ppazip.lha

18 October 2006, 12:10	#5
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	aye i remember now, as the amiga is missing a specific programming line it has to pulse another so a line re-route is needed hence either a modified connector OR i am sure you can buy them at one point. hmmm maybe ebay lol its looking good, not sure how the experimental drivers might go though..

19 October 2006, 00:26	#6
sniperchaz Zone Friend Join Date: Jul 2006 Location: MARGATE UK Age: 62 Posts: 33	poohbear thx for the link unfortunatly redirects me to Iomegas site and they nolonger support the older drivers and yes you can run a zip 100 parallel on an amiga 1200 with the origanal cable as i was doing so upuntill a few weeks ago when i did a fresh instal but found my origanal driver disk has become corupted i dont know about the newer zip drives though as i bought this one a fair few years back specificaly for my A1200 i will have ago at dumping block by block though as i may strike it lucky and thx for the input me old grey matter isnt to sharp these days lol

19 October 2006, 00:56	#7
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	good luck Sniperchaz! out of curiousity, what was the speed like via the zip100 on the par connector.

19 October 2006, 01:22	#8
sniperchaz Zone Friend Join Date: Jul 2006 Location: MARGATE UK Age: 62 Posts: 33	cant remember off hand but it was a lot faster than parneting just load up the zip unplug it, plug it into my other 1200 and off load it lol if i can get the driver for it and re-install it ill time it for you and let you know

19 October 2006, 10:03	#9
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 50 Posts: 1,536	it worked without that aminet hack? geez, i must try that, i saw somewhere at storage one old parallel drive. Let us know if you find drivers.

19 October 2006, 20:54	#10
sniperchaz Zone Friend Join Date: Jul 2006 Location: MARGATE UK Age: 62 Posts: 33	yep noprobs

20 October 2006, 01:56	#11
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	I have a Zip100 Par in store... hell i dont even know if it fires up its been that long LOL... actualy i dont think i have any zipdisks.... LOL I have to admit i prefered the simplicity of the LS120

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

21 October 2006, 22:18	#12
sniperchaz Zone Friend Join Date: Jul 2006 Location: MARGATE UK Age: 62 Posts: 33	id just like to get the zip up and running again lol still got 2gigs of files left to transfer to me other miggy and parnet is so slow its worse than snail mail lol