24 May 2010, 03:09 | #1 |
Registered User
Join Date: Apr 2007
Location: Oakbank, Canada
Posts: 85
|
Missing something moving to real amiga
I setup everything in WinUAE to match my machine (A1200, 68030 64Meg) and copied everything to a hard drive. The first partition is 1.5Gig formatted with SFS and the second is 4 Gig, also formatted SFS. When I put the drive in my amiga I get a back screen.
I also tried booting from a workbench disk and I can see the system partition fine. Any ideas what I should be checking? This is running AmigaOS 3.1 with 3.0 ROMS. The drives are connected to a IDEFix-Express. |
24 May 2010, 04:32 | #2 |
Junior Member
Join Date: Sep 2001
Location: No(R)Way
Age: 41
Posts: 3,185
|
Did it boot from the drive in Winuae ?
|
24 May 2010, 05:23 | #3 |
Registered User
Join Date: Apr 2007
Location: Oakbank, Canada
Posts: 85
|
Just tried, same result.
|
24 May 2010, 08:40 | #4 |
Registered User
Join Date: Mar 2009
Location: some where in the world
Posts: 50
|
move to a real miggy uae it just a emulator it not the real deal
the program has lot of features in it timing is off compared to the real one noting like a real miggy |
24 May 2010, 08:49 | #5 |
Registered User
Join Date: Feb 2008
Location: RNO
Posts: 1,006
|
The most obvious question is if your hd is properly prepared for booting? Is SFS saved to HD's RDB and is there bootable flag set to first (system) partition?
You could also run check4gb to check if your system is configured correctly for that big partitions. |
25 May 2010, 05:21 | #6 |
Registered User
Join Date: Apr 2007
Location: Oakbank, Canada
Posts: 85
|
Found it. It was IDEFix causing me grief. Commented it out and reinstalled after it booted and everything works fine now.
|
25 May 2010, 07:43 | #7 |
Moderator
Join Date: Nov 2004
Location: Eksjö / Sweden
Posts: 5,602
|
|
25 May 2010, 08:05 | #8 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,502
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Installing amiga os 3.5/3.9 using winuae then moving cf to amiga 1200 | alienkidmj12 | support.Hardware | 11 | 02 May 2014 08:30 |
Moving HDD from Pc to Amiga | Hockmiester | support.Hardware | 2 | 25 March 2013 17:37 |
No disk visible in boot menu after moving from winuae to amiga | syfon | support.Hardware | 7 | 10 March 2013 10:43 |
geek moving to amiga os 4 (plattform) | PseudoDOS | Amiga scene | 8 | 03 August 2004 17:16 |
It's moving..it's alive, it's moving.. IT'S ALLIIIIIIIIIIVE!!!!!!!!!1 | alkis21 | Retrogaming General Discussion | 23 | 22 August 2002 10:51 |
|
|