27 September 2009, 15:48 | #1 |
Music at its Best
Join Date: Mar 2006
Location: UK
Posts: 42
|
SCSI Termination
Hi, can you help!
I am about to replace the SCSI Hard Disk in my GVP A500=HD+ Series II, do I set the termination jumper on the new SCSI drive, I have read the manual for the GVP it tells me all about external Termination but nothing about the Termination for the Internal SCSI HD Thanks for your help Richard |
27 September 2009, 17:08 | #2 |
Registered User
Join Date: Jan 2005
Location: UmeƄ
Age: 44
Posts: 936
|
As I suppose you have already heard, the scsi chain should be terminated at both ends.
In your case (assuming you have no external harddrive), one end will be your internal harddrive and the other the GVP controller - so in theory both the controller and the harddrive should be terminated. Though, some GVP controllers come with onboard termination and some doesn't. In the case where the GVP controller is terminated - it is all well - just jumper your harddrive to enable termination and both ends are terminated. In the case when the GVP controller isn't terminated, one would think that it would matter, but as the harddrive is so close to the controller (about 10cm of scsi cabling), it will in practise not matter - just jumper your harddrive to enable termination and it will work fine - even if it according to the big book of scsi theory is wrong. One last thing though, if you on your harddrive have a jumper to select where to get the termination power from, select it to be powered from the drive, as atleast my GVP does not supply termination power onto the internal bus (but if my memory serves me right - it does for the external connector). Last edited by patrik; 27 September 2009 at 17:15. |
27 September 2009, 17:42 | #3 |
Music at its Best
Join Date: Mar 2006
Location: UK
Posts: 42
|
Thank You Patrik for your very usfull information!
Richard |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Zorro Bus Termination... | chiark | support.Hardware | 3 | 15 October 2010 09:50 |
I need scsi termination advice | gulliver | support.Hardware | 9 | 14 April 2010 21:05 |
Scsi Termination On A 4000T | THX1138 | support.Hardware | 7 | 12 October 2008 17:48 |
WTB SCSI Termination Resistor Packs | TheCorfiot | MarketPlace | 8 | 18 May 2008 17:37 |
Scsi ID's & Termination | THX1138 | support.Hardware | 11 | 29 January 2004 23:29 |
|
|