AmiQuake new 68k Quake Port for AGA/RTG

[TCD]

Originally Posted by eXeler0

i have the real Clickboom CD somewhere and I could run it on a real Amiga, but for screengrabs it should probably be done in WinUAE

*sigh* I guess I'll grab ClassicWB and try to get it running then. Might take a while though. Still hoping that somebody could help out

[Photon]

Originally Posted by trixster

@Bruce Abbot @photon

Can you take this shit to another thread?

This is what I suggested. The 'derailment' may be highly relevant to supporting the Amiga platform (as opposed to 'whatever runs game X'). Post history seems revised now, so I guess it's OK and we can talk about how to run a game the authors never bothered to grace the platform with. They were single-focused on making the PC run a single game decently at all at the time. And after all, that pursuit was admirable.

[neocdtv2]

Hardware:
A4000TX, BFG9060 with 68060@100Mhz, Cybervision 64/3D
Software:
AmigaOS 3.1, CyberGraphX V4, Warp3D 4.2a, mmulib

GLQuake 320x200x15bit - 12,3FPS - by tweaking the config, one can get up to 14.5FPS
Clickboom Quake CGXv4 320x200x8bit - 21,27FPS
Clickboom Quake CGXv4 320x200x15bit - 17,7FPS
Clickboom Quake AGA NTSC 320x200x8bit - 20,25FPS
NovaCoder AmiQuake AGA NTSC 320x200x8bit - 17,9FPS

Hardware:
A4000TX, BFG9060 with 68060@100Mhz, Cybervision 64
Software:
AmigaOS 3.1, CyberGraphX V4, Warp3D 4.2a, mmulib

Clickboom Quake P96 3.2.x 320x200x8bit - 23,45FPS
Clickboom Quake P96 3.2.x 512x342x8bit - 15,33FPS (non-Fullscreen)
Clickboom Quake AGA NTSC 640x200x8bit - 14FPS (non-Fullscreen)

All videos on my channel:
https://www.youtube.com/channel/UCfd...NSW0XdCPiHnl1g

[nikosidis]

I see in Clickboom quake that it is possible to change audio quality.
I still do not like Clickboom quake cause of the controlls.
My question is if it would be possible to add the audio quality settings to this version.
I use Pistorm32 so the speed is not a problem. I could set audio quality to best possible with almost no loss in fps. Anyway, great job with Amiquake!

[nikosidis]

AmiQuake

Timedemo demo1 22fps

Pistorm32 with Pi3. Full screen 320x256, PAL, AGA.

[ Show youtube player ]

Video is 320x256

Timedemo demo1 27.2fps in 320x200 PAL.

[NovaCoder]

Thanks for sharing the video, looks very smooth and playable

[nikosidis]

Originally Posted by NovaCoder

Thanks for sharing the video, looks very smooth and playable

For sure is! I thought the fps was more
Thanks for your work on this.

[pixie]

Originally Posted by nikosidis

AmiQuake

Timedemo demo1 22fps

Pistorm32 with Pi3. Full screen 320x256, PAL, AGA.

[ Show youtube player ]

Video is 320x256

Timedemo demo1 27.2fps in 320x200 PAL.

We should be in the very limits of the AGA chipset! Most impressive!

[nikosidis]

The game will run faster with AGA. I overclocked Pi3 and achieved 23.5 fps in 320x256, PAL, AGA, fullscreen. God knows with Pi4

##Enable the options below to increase speed of RPi3 ARM cpu to 1.5GHz
force_turbo=1
over_voltage=4
arm_freq=1500
core_freq=400
sdram_freq=600

Edit: I now tried the Timedemo for the 2nd time without overclock and I got 23fps. This means that the timedemo is not constant. As already mentioned we are probably near the end of what is possible. We will see when Pi4 is tested with this game.

[str0m]

Do the mipscale and mipcap commands work in the Ami version? Back in the day I played Quakeworld at top level and all we cared about was FPS so would quite happily suffer degraded visuals. You can pretty much turn the textures off. Curious if this works here and what sort of fps you can get, try the following in the ingame console

d_mipcap 3
d_mipscale 20

----------
Syntax: d_mipcap <value>

Default: 0

Sets the detail level. Values range from 0-3 with 0 giving the highest detail.

d_mipscale (V)

Syntax: d_mipscale <value>

Default: 1

Sets how much detail distant objects have. Values range from 0-40 with 0 not bluring distant objects at all. (Uses lots of ram if set to 0)

[nikosidis]

Here is Quake 2 in 320x200 on Pistorm32.

[ Show youtube player ]

[SKOLMAN_MWS]

Quake in HAM6 on A500 link

[nikosidis]

Originally Posted by SKOLMAN_MWS

Quake in HAM6 on A500 link

That is impressive! You should turn on double buffering.

[nikosidis]

With Pi4 in Pistorm32 and AGA we destroy what we though was possible. This is running AmiQuake


With RTG it is way over 100 FPS.

[NovaCoder]

Originally Posted by nikosidis

With Pi4 in Pistorm32 and AGA we destroy what we though was possible. This is running AmiQuake
Attachment 78320

With RTG it is way over 100 FPS.

Would love to see a 100 FPS video, that would be crazy

[nikosidis]

Originally Posted by NovaCoder

Would love to see a 100 FPS video, that would be crazy

It is Tom-Cat that did these testes. I do not have Pi4. I asked him if could do a video of RTG version
Timedemo is 126 FPS.

[tomcat666]

Originally Posted by NovaCoder

Would love to see a 100 FPS video, that would be crazy

Here it is:

[ Show youtube player ]

This time it is 123 fps If you blink the timedemo is over.

Pistorm32 rpi4 at 2.2Ghz

[nikosidis]

Thanks Tom-Cat
New world record on Amiga

[TCD]

Originally Posted by tomcat666

This time it is 123 fps If you blink the timedemo is over.

That's really impressive How fast does it run in 640x400?

[tomcat666]

Originally Posted by TCD

That's really impressive How fast does it run in 640x400?

67 fps in 640x400 :

[ Show youtube player ]