![]() |
![]() |
#1 |
Coastal Amigan (USA)
|
WTB: CD32/A4000 to PS2 Keyboard Adapter
Im in the states.
Anyone have one for lesser than they are being exploited on ebay for or so they would like to part with. The idea I have is using a logitech wireless keyboard perhaps with my cd32. The PS2 type of course. |
![]() |
![]() |
#2 |
Registered User
Join Date: Nov 2006
Location: Amigaville
Age: 46
Posts: 3,337
|
Here you go chap. Works fine on a CD32 as well (tested it ages ago on mine)
http://amigakit.leamancomputing.com/...fded65105954b4 |
![]() |
![]() |
#3 |
Coastal Amigan (USA)
|
ouch $40 USD with shipping handing.
Thats a little over my budget ![]() |
![]() |
![]() |
#4 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
@nc88keyz
errmmm I am not sure if thats what your looking for... cd32 uses a proprietary 6 pin interface thats combined with a simple (butchered) serial port. the A4000 uses a 6 pin mini din connector. (similar to PS2 but PS2 although a 6 pin mini din, also uses a different protocol / logic) what are you plugging the devices into ? |
![]() |
![]() |
#5 |
Coastal Amigan (USA)
|
zetro, didnt paul confirm it works.
The logic controller converts the pc signals to the amiga correct. So that is in fact what I would need I would think. Now im confused. ![]() |
![]() |
![]() |
#6 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
perhaps on an Amiga 4000, but the CD32 is a completely different pin out i am afraid to say.
heres the 6 pin mini din (used on the A4000T's / CDTV) http://pinouts.ru/Inputs/KeyboardAmiga6_pinout.shtml and here is the 5 pin min din used on most else http://pinouts.ru/Inputs/KeyboardAmiga5_pinout.shtml and here is the cd32 pinout http://pinouts.ru/Inputs/KeyboardAmigaCD32_pinout.shtml Looking at the CD32 port pinout and the A4000 6 pin mini din, the Keyboard signals are in the right place so yes you could use the dongle... my apologies for the added confusion, I honestly thought the cd32 port was different that the a4000 (which al though is, it has the same keyboard pinout placement.) I have leaned something today. ![]() |
![]() |
![]() |
#7 |
Coastal Amigan (USA)
|
lol,
ive done this before too. Too many migis causing interference on your hardwired connection to the matrix? no worries. What I learned today: How to set up an RSS feed for amigas accross the united states and craigslist ![]() The ultimate packrat tool |
![]() |
![]() |
#8 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
Sweet!
|
![]() |
![]() |
#9 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,449
|
@Zorro
De Ja Vu. I am sure we've had this conversation before in a different thread? The CDTV is the one with a non-standard keyboard. It must have a CDTV keyboard or an "active" adapter dongle. The CD32 AUX port is the standard A4k keyboard connector but it also carries a serial port. Always handy for linking up to another Amiga. Last edited by alexh; 13 January 2008 at 20:15. |
![]() |
![]() |
#10 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
@alexh
De Ja Vu indeed! wierd |
![]() |
![]() |
#11 |
Coastal Amigan (USA)
|
confused again
My cd32 is in route.
When i get a chance to look at the back there is a keyboard port and aux port? I thought one was to use it as a serial cdrom for an amiga computer. It looks like this adapter is gonna run 40 bucks anyway i spin it ....unless a nice soul has one lying around and judging from the peeps on this board. You guys have a lot of migs in the closet. Afterall Eurpope was ruled by the Amiga in the day. As you can see the ratios of amiga stuff on ebay and others is slim pickins in the US |
![]() |
![]() |
#12 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
hmmmies
okay heres some of my pin outs that i have put together, this might help a smidge firstly an overview that i found on google. ![]() this is a basic version that common in Europe ![]() and heres some stuff i have put together from pinouts on the net. AUX ![]() Power ![]() Internal RGB ![]() If you are modding a 15kHz VGA or RGB Scart, then i would suggest you use an 8703 OpAmp to boost the signals as they are quite weak from the reports i have read, on top of which the SVideo connector puts a high draw on the signal too. hope that helps |
![]() |
![]() |
#13 |
Coastal Amigan (USA)
|
those are pretty cool diagrams. I think I just found my new wallpaper
![]() |
![]() |
![]() |
#14 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
Lol
![]() |
![]() |
![]() |
#15 |
Coastal Amigan (USA)
|
got my cd32 today. quite impressed with the condition. It still has the plastic on the cd lens as well as the amiga cd32 logo....It looks beautiful on my sammy 50" dlp. ran the audio direct to a panny digital ht receiver.
Meanwhile...the amiga cd32 tosec is anything but lost ![]() I sure would like that floppy drive from the institute but I really dont want to pay a mint for it. |
![]() |
![]() |
#16 |
. . Mouse . .
Join Date: Jun 2005
Location: Nowhere
Age: 55
Posts: 1,792
|
Ah, IMO a CD32 is the best machine for playing most Amiga games - could do with a few upgrades (Zetr0?) but there are those nice 444, 888 compilations etc...
My congrats on your purchase. ![]() |
![]() |
![]() |
#17 |
Coastal Amigan (USA)
|
Didnt find a keyboard adapter .....But this might just work out
Ok,
So i didnt purchase a keyboard translator. I thought about it and the pros/cons For what 1200s go for around here in the US, i had a decision to make. So its no sx32-pro but I stayed up all night to beat the clock on an sx-1 from the UK. Reputable seller ...early bird gets the worm. If you dont factor shipping worked out to be 160 USD. Bid with 9 secs left ![]() Now when zetr0 makes our trapdoor expansion, I can sell it for more than I paid for it... I call it renting a little bito retro history. Zert0? How are we coming along now ![]() My only regret is I didnt get my retro on sooner....as there was a cd32 sx1 combo in maine, usa for 229 or so. I suppose I will need a cheap external floppy now. Hmm. And so it continues.... |
![]() |
![]() |
#18 |
Miggy Man
Join Date: Nov 2004
Location: Cornwall, United Kingdom
Age: 40
Posts: 831
|
Good luck with the SX-1 fun.
I've got one of those for my CD32, bought it from new (Yep, I bought my CD32 and SX-1 when it was for sale in the shops, and I still have them both). Make sure you put the CD32 (and SX-1) on a flat surface when you use it though (Not on the carpet, I generally use a large hardback book if I have to have it on the floor) otherwise the connection between the SX-1 and the CD32 is quite bad and it doesn;t work properly (or at all sometimes) |
![]() |
![]() |
#19 |
Coastal Amigan (USA)
|
Binox!
your the guy who has way too much amiga stuff lying around ...haha
I have hardwood floors so I dont think that will be an issue. I will probally get some kind of miniture static mat for it though. Its an odd ball config. But hey its gonna be in a rack under my 50" sammy in the game room sooo I think it will do just fine. Whats the max ram module avalable for the sx-1? I have som 64mb edo 72 sims in a cup upstairs. No Workie? |
![]() |
![]() |
#20 |
Miggy Man
Join Date: Nov 2004
Location: Cornwall, United Kingdom
Age: 40
Posts: 831
|
I think it can take up to 8MB of RAM
Can only take 4MB if you have the FMV module installed as well though |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
WTB: A1200 Keyboard Adapter | tonyyeb | MarketPlace | 4 | 04 December 2015 19:27 |
WTB: Amiga / PS2 adapter | JonSick | MarketPlace | 0 | 11 March 2013 13:56 |
Lyra keyboard adapter for A2000/A3000/A4000/CD32 | Paul_s | MarketPlace | 4 | 05 October 2010 14:31 |
WTB: Danish A1000 and A4000(T) Keyboard | Kristian95 | MarketPlace | 0 | 06 March 2009 03:34 |
A2000 Keyboard to PS2 Adapter? | Macca | support.Hardware | 19 | 23 May 2008 19:45 |
|
|