![]() |
![]() |
#1 |
Retro Freak
Join Date: Nov 2001
Location: Slovenia
Age: 51
Posts: 1,708
|
I have a CF -> PCMCIA Adapter on my A1200 and only 3 out of 5 CF cards work with it. 2 of them don't even get recognised by the Amiga, but all of them work perfectly fine in the PC... So it seems some CF cards are a problem...
Tomaz |
![]() |
![]() |
#3 |
Amiga-less!
Join Date: Feb 2005
Location: UK
Posts: 1,350
|
Isnt that software the EasyADF software you get from Amigakit.
Rod_cl: Thats software is for use with a pcmcia cf reader and not an IDE>CF adapter |
![]() |
![]() |
#4 |
Zone Friend
Join Date: Apr 2005
Location: Cider is best In The West
Posts: 1,238
|
Don't know. I got this software a year or so ago with my CF adapter.
|
![]() |
![]() |
#5 |
Registered User
Join Date: Aug 2004
Location: www.amigakit.com
Posts: 2,092
|
@Smiley
Dont have access to Zone files so hope EasyADF or any of our other original software is not in the zone. Last edited by amigakit.com; 25 August 2006 at 15:23. |
![]() |
![]() |
#6 |
Zone Friend
Join Date: Apr 2005
Location: Cider is best In The West
Posts: 1,238
|
It's not EasyADF. Can't you read? What is EasyADF anyway?
|
![]() |
![]() |
#7 |
Demoscener
Join Date: May 2006
Location: FR
Age: 54
Posts: 461
|
Using a Compact Flashcard on a600/a1200
Thanx to information I could find on several Amiga dedicated forums, I finally got around buying a PCMCIA card that enables me to add a Compact Flash card to my beloved A1200.
![]() Installing the software was fairly simple and all I had to do was plugin my 32megs CF card into the slot. I wanted to transfer the content of an old HD and it was a pain to swap the card as it got full real fast. So I bought a 512 megs (8X) from Lexar Media. When plugged on a Pegasos/PC it is automaticaly detected so I could FAT format it without any troubles. Sadly, when I connect it to my A1200 and boot the machine the WB will load OK but freezes at the end. Leaving me with a WB on which the mouse doesn't move/cannot click anywhere. The only way to solve the prob is of course to remove the Card. I have no idea whatsoever on what's the origin of my troubles. Is it that I should edit the CF0 device? What should I change then? I really hope some of you will be able to help as I am really lost. Cheers dudes! crown/cryptoburners |
![]() |
![]() |
#8 |
Zone Friend
Join Date: Apr 2005
Location: Cider is best In The West
Posts: 1,238
|
Not so long ago I uploaded my software I used on my A1200 to install a CF adapter. It works fine with my Scan Disk 250MB (XP & A1200). Maybe you download it and try it out.
Last edited by TCD; 14 March 2011 at 15:26. |
![]() |
![]() |
#9 |
Demoscener
Join Date: May 2006
Location: FR
Age: 54
Posts: 461
|
I have tried that one and I get the same result.
Did you change any values in the CF0 device? |
![]() |
![]() |
#10 |
Zone Friend
Join Date: Apr 2005
Location: Cider is best In The West
Posts: 1,238
|
No, I haven't. I also haven't formatted my CF card. When I got it I plugged it in my card reader and it was automatically detected.
|
![]() |
![]() |
#11 |
Demoscener
Join Date: May 2006
Location: FR
Age: 54
Posts: 461
|
yep. that only works with my 32 megs.
booooring. |
![]() |
![]() |
#12 |
Registered User
Join Date: Jul 2005
Location: Lincoln, England
Age: 46
Posts: 113
|
I seem to be having a slight problem with my cf adaper,
Following a total drive failure (Own fault for trying to change filesystem) i am currently restoring all of my games from my pc to my 1200 using a cf adapter. It will start copying and then for no reason stop, The "Copying" box is still there but the hd lights not flashing, I can restart the copying by removing the cf adapter and then replacing it and it then carries on where it left off. Im copying stuff now as i type and its stopped twice. Anyone shed any light on this?? |
![]() |
![]() |
#13 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
is this IDE or pcmcia DanE ?
|
![]() |
![]() |
#14 | |
Registered User
Join Date: Jul 2005
Location: Lincoln, England
Age: 46
Posts: 113
|
Quote:
|
|
![]() |
![]() |
#15 |
Still an Amiga user
Join Date: Nov 2006
Location: Kent
Age: 56
Posts: 2,715
|
Hi all - I just bought a 1 gig Dane Elec CF card to transfer my games from PC to A1200 - installed the files required but it wouldn't work until I took my Hawk 8 Meg RAM expansion out of the Amiga - I guess the card is just not PCMCIA friendly - anyone else experiencing problems may want to take their trapdoor cards out and see if they have better results.
Can I make this card friendly does anyone know? Maybe an onboard jumper or disable at boot option exists...? |
![]() |
![]() |
#16 |
Zone Friend
Join Date: Jan 2006
Location: Kent
Age: 51
Posts: 1,093
|
I use the PCMCIA software you get when buying from Amigakit and it has worked very well for me.As well as buying from Amigakit , i also bought a PCMCIA adaptor from ebay - i was a little worried that it might need to be a certain type of adaptor but it seems any will do.I use a 512mb Kingston as well as another that i can't think of right now but been lucky in that everything works just dandy.Tried the software in both a normal WB install and classicWB.
|
![]() |
![]() |
#17 | |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
Quote:
the better way would be to plumb for either an apollo 030 card or a blizzard MK3 or greater 030 card. there are both good and bad points for chosing either of those cards so let me state that if all you want is a stable 030 that is CHEAP and pcmcia friendly and can handle upto 64MB ram Apollo is the way to go. Other will swear by thier Blizzards and i dont blame them either for i am sure they have valid reasons, I have owned Blizzards and Apollo's both have merits and drawbacks.. have a search on these fair boards there was a thread about it recently. but yes a little OT there sorry about that. just config the memory jumpers to 4MB change the memory stick if you want to as well and it should allow access for the PCMCIA to address its memory space. |
|
![]() |
![]() |
#18 |
Still an Amiga user
Join Date: Nov 2006
Location: Kent
Age: 56
Posts: 2,715
|
Hi, thanks for that - I will give that a go - which jumper on the board would I change - there are three - LK1, LK2 and Lk3... at least it means that I wouldn't have to take the board out everytime I wanted to transfer data - just change the jumper - what did you mean by "change the memory stick as well?
Do you know what the other jumper on the board does - it says Int/Cpu ? Sorry to pick your brains but in the past I have had Blizzard boards and never had problems with PCMCIA trouble - I am on the lookout for an 030 board - would like to try an Apollo as I've never had one... can you still get them or is it just a question of checking Ebay... Peter |
![]() |
![]() |
#19 |
Zone Friend
Join Date: Feb 2006
Location: Hertfordshire
Posts: 688
|
I believe that Zetro is correct.
My PCMCIA flash card works fine with my 030 Wizard accelerator (believed to be Apollo alternative) with 32meg piggyback. I use the Kingston card also with no problems at all. |
![]() |
![]() |
#20 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
Configuring Memory on Hawk Expansion Board
Heys pete,
the Hawk expansion board requires jumpers LK1, LK2 and LK3 to be configured in such a way that the expansion board can set the amount of ram (1,2,4 or 8MB ram). this differs from Accelerator boards that generally map their own memory automatically. As a note Blizzards can map upto 128MB ram and if you add a SCSI module a further 128MB ram can be installed *total 256MB* Apollos accelerators can only map upto 32MB but you can add another SIMM socket and add a further 32MB *total 64MB* in a piggyback like magno's. LK4 refers to the Int/Cpu jumper, this is a pre-thought by AmiTek for they planned to release 28mhz 020 cards (original A1200 020 only runs at 14mhz) . the Internal Cpu jumper turns on or off the A1200 020 CPU *setting this to on will probly result in the A1200 not booting* so here are the LK1, LK2 and LK3 settings for memory to configure the board for 8MB LK1 = open, close, close LK2 = close, close, open LK3 = open, close, close to configure the board for 4MB LK1 = close, close, open LK2 = close, close, open LK3 = open, close, close to configure the board for 2MB LK1 = open, close, close LK2 = open, close, close LK3 = close, close, open to configure the board for 1MB LK1 = close, close, open LK2 = open, close, close LK3 = close, close, open ---------------------- A point of interest is that AmiTek also made 2MB and 4MB PCMCIA ram cards http://www.amiga-hardware.com/showha...cgi?HARDID=943 anyways hope it helps. |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Using a Compact Flash card on a600/a1200 IDE | Smiley | support.Hardware | 744 | 22 March 2023 18:09 |
compact flash pcmcia not working in a1200 | GurjSagoo | support.Hardware | 9 | 02 April 2018 21:01 |
Slow PCMCIA>Compact Flash speeds | radiokida | support.Hardware | 5 | 02 May 2013 17:00 |
Compact Flash PCMCIA on an A600 | sdaonline | New to Emulation or Amiga scene | 3 | 13 February 2011 04:30 |
How To Get A600 To Read Compact Flash Card ? | Rich M | Amiga scene | 5 | 02 May 2005 06:56 |
|
|