WinUAE 3.0.0 beta series (was 2.8.2/2.9.0) - Page 4

Neil79 · 25 July 2014, 13:23

Very nice, cheers Toni!

Zilog · 25 July 2014, 13:33

Thanks Tony!

Retrofan · 25 July 2014, 15:03

Great

Steve · 25 July 2014, 15:37

Quote:

Originally Posted by Toni Wilen

http://www.winuae.net/files/b/winuae_2820b5.zip
Big accelerator board emulation update:

Added CyberStorm MK3, CyberStorm PPC and Blizzard PPC. ! There is no PPC CPU ! Technically it emulates board with PPC CPU removed.

Does this mean you are planning PPC emulation in the future? Could we soon be able to run Amiga OS 4.1 on WinUAE?

Toni Wilen · 25 July 2014, 16:30

Quote:

Originally Posted by Steve

Does this mean you are planning PPC emulation in the future? Could we soon be able to run Amiga OS 4.1 on WinUAE?

Ugh. No.

Steve · 25 July 2014, 16:36

Shame.

Toni Wilen · 25 July 2014, 17:03

This is serious answer from me, for once about PPC: I don't do anything PPC but it is possible (unlikely but possible) to bolt some external PPC CPU-only emulator to Blizzard/CSPPC emulation and see what happens.

But this thread is wrong place for this discussion. Do not reply, thanks.

Retrofan · 25 July 2014, 20:23

Hi master. A couple of noob questions: Not sure how to configure well the use of for example B1260. Is it just to select it in the Ram options as I've already done, or do I need to use it's rom -how?- from the ones you've got in the zone?

And finally... so there's no way to have the rainbow of colors while booting with it?

Well, Yes and No as answer is ok

. Thanks Toni.

Toni Wilen · 25 July 2014, 20:50

Quote:

Originally Posted by Retrofan

Hi master. A couple of noob questions: Not sure how to configure well the use of for example B1260. Is it just to select it in the Ram options as I've already done, or do I need to use it's rom -how?- from the ones you've got in the zone?

And finally... so there's no way to have the rainbow of colors while booting with it?

Well, Yes and No as answer is ok

. Thanks

Copy all blizzard roms to your rom directory and click rom rescan button in Paths panel. All non-flash based roms are detected automatically.

You get colors if you select 68060 (Blizzard 1260 boot rom is strange, it is single color only if 68040, rainbow colors if 68060..) and set cpu speed to approximate. Any other mode runs too fast and you get only about half frame worth of colors..

Retrofan · 25 July 2014, 21:12

Fantastic. With my AK Real it works with JIT enabled, and even with the option of Fastest as Possible I have two half a second rainbow screens while booting in my slow "C=64" Pc

Edit: But the UAEQuit command doesn't work right with this latest beta?

Zilog · 25 July 2014, 21:40

Hi Tony,
when active a acceleration board CMK3 crach winue.

Insert a dump in the post.winuae_2.8.2_b5_2014.07.25_21.31.04.dmp

Edit: Other Detail:
Crush if use 4-8Mbyte of chip ram or add more 32-chip Ram, start only with 2mbyte of chipram.

Toni Wilen · 25 July 2014, 22:49

Quote:

Originally Posted by Zilog

Other Detail:
Crush if use 4-8Mbyte of chip ram or add more 32-chip Ram, start only with 2mbyte of chipram.

What is your exact configuration that crashes? (Include config file). Possibly you have overlapping address spaces, they are not really checked yet.

Retrofan · 25 July 2014, 23:08

Do you find as me a problem now with UAEQuit? -while using a B1260-.

Quote:

Originally Posted by Retrofan

The UAEQuit command doesn't work right with this latest beta?

Zilog · 25 July 2014, 23:16

Quote:

Originally Posted by Toni Wilen

What is your exact configuration that crashes? (Include config file). Possibly you have overlapping address spaces, they are not really checked yet.

Amiga.4000T.uae

The Problem dont' present only with 2Mbyte chip Ram.

Toni Wilen · 26 July 2014, 09:57

Quote:

Originally Posted by Retrofan

Do you find as me a problem now with UAEQuit? -while using a B1260-.

It is normal.

All 68060 boards have F00000 located ROM which is also location of original UAE boot ROM that most UAE utilities address directly.

If F00000 is already in use, UAE boot rom gets moved to another location and most utilities don't know nothing about alternate locations.

Only newer programs that use uae.resource will still work.

Zilog · 26 July 2014, 11:09

Quote:

Originally Posted by Toni Wilen

It is normal.
Only newer programs that use uae.resource will still work.

Ok,
another question; with this configuration don't detect processor ram board of acceleration card.test.uae

Toni Wilen · 26 July 2014, 11:12

Quote:

Originally Posted by Zilog

Ok,
another question; with this configuration don't detect processor ram board of acceleration card.Attachment 40644

Check changelog again. Only Blizzards (at the moment) use accelerator board slider, other boards use same memory space as CPU board memory slider (above accelerator board slider).

I can't duplicate your crash. Does it crash only after booting? Does it crash if you boot without startup-sequence?

Mad-Matt · 26 July 2014, 11:18

Probably not relevant to anything but I would just mention that now with Accelerator emulation, Fastexec can now finally put expansion.library into fastmem (All libs now in fastmem).

Zilog · 26 July 2014, 11:23

Quote:

Originally Posted by Toni Wilen

Check changelog again. Only Blizzards (at the moment) use accelerator board slider, other boards use same memory space as CPU board memory slider (above accelerator board slider).

I can't duplicate your crash. Does it crash only after booting? Does it crash if you boot without startup-sequence?

Ok.
After boot crach; whitout startup-sequence don't crach. I Do other test , if disable rtg uae and use native aga don't crach.

Toni Wilen · 26 July 2014, 12:18

BlizzardPPC + MMU option + if any UAE expansion is enabled problem found, for some reason default MMU setup which it sets during boot unmaps all autoconfig boards from address space temporarily. And UAE boot rom "hides" there if f00000 is in use. I had to add second backup location for this configuration..

(BlizzardPPC is quite special, it uses MMU, has 68060.library in flash and more..)

winuae.zip updated.

Quote:

Originally Posted by Mad-Matt

Probably not relevant to anything but I would just mention that now with Accelerator emulation, Fastexec can now finally put expansion.library into fastmem (All libs now in fastmem).

Probably because your config now has non-autoconfig fast ram, I am 100% sure it has nothing to do with accelerator option.

Quote:

Originally Posted by Zilog

Ok.
After boot crach; whitout startup-sequence don't crach. I Do other test , if disable rtg uae and use native aga don't crach.

Still can't duplicate. Your config boots fine to WB with RTG enabled.
- try without JIT. Always without JIT because dumps generated when JIT is active are totally unusable. (But wait for next official beta before attaching new dumps)
- try with 68040. Sometimes 68060 may appear to work even when correct support is missing.

25 July 2014, 20:23	#68
Retrofan Ruler of the Universe Join Date: Mar 2010 Location: Lanzarote/Spain Posts: 6,189	Hi master. A couple of noob questions: Not sure how to configure well the use of for example B1260. Is it just to select it in the Ram options as I've already done, or do I need to use it's rom -how?- from the ones you've got in the zone? And finally... so there's no way to have the rainbow of colors while booting with it? Well, Yes and No as answer is ok . Thanks Toni. Last edited by Retrofan; 25 July 2014 at 22:06.

25 July 2014, 21:12	#70
Retrofan Ruler of the Universe Join Date: Mar 2010 Location: Lanzarote/Spain Posts: 6,189	Fantastic. With my AK Real it works with JIT enabled, and even with the option of Fastest as Possible I have two half a second rainbow screens while booting in my slow "C=64" Pc Edit: But the UAEQuit command doesn't work right with this latest beta? Last edited by Retrofan; 25 July 2014 at 22:54.

25 July 2014, 21:40	#71
Zilog Registered User Join Date: May 2014 Location: Italy Posts: 419	Hi Tony, when active a acceleration board CMK3 crach winue. Insert a dump in the post.winuae_2.8.2_b5_2014.07.25_21.31.04.dmp Edit: Other Detail: Crush if use 4-8Mbyte of chip ram or add more 32-chip Ram, start only with 2mbyte of chipram. Last edited by prowler; 25 July 2014 at 23:11. Reason: Back-to-back posts merged; please use the Edit button.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WinUAE 2.6.1 beta series	Toni Wilen	support.WinUAE	21	19 June 2013 11:54
WinUAE 2.3.3 beta series	Toni Wilen	support.WinUAE	124	17 September 2011 15:48
WinUAE 1.6.1 beta series	Toni Wilen	support.WinUAE	54	18 June 2009 11:05
WinUAE 1.5.1 beta series	Toni Wilen	support.WinUAE	242	12 August 2008 12:42
WinUAE 1.5.0 beta series	Toni Wilen	support.WinUAE	453	19 June 2008 09:05

25 July 2014, 13:23	#61
Neil79 Autistic 'n IRN! Join Date: Jul 2012 Location: - Posts: 2,980	Very nice, cheers Toni!

25 July 2014, 13:33	#62
Zilog Registered User Join Date: May 2014 Location: Italy Posts: 419	Thanks Tony!

25 July 2014, 15:03	#63
Retrofan Ruler of the Universe Join Date: Mar 2010 Location: Lanzarote/Spain Posts: 6,189	Great

25 July 2014, 16:36	#66
Steve I Identify as an Ewok Join Date: Jul 2001 Location: North Lincolnshire Age: 45 Posts: 2,356	Shame.

25 July 2014, 17:03	#67
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,517	This is serious answer from me, for once about PPC: I don't do anything PPC but it is possible (unlikely but possible) to bolt some external PPC CPU-only emulator to Blizzard/CSPPC emulation and see what happens. But this thread is wrong place for this discussion. Do not reply, thanks.

26 July 2014, 11:18	#78
Mad-Matt Longplayer Join Date: Jan 2005 Location: Lincoln / UK Age: 44 Posts: 1,849	Probably not relevant to anything but I would just mention that now with Accelerator emulation, Fastexec can now finally put expansion.library into fastmem (All libs now in fastmem).

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)