09 September 2019, 23:12 | #1 |
Registered User
Join Date: Sep 2019
Location: Poland
Posts: 39
|
Winuae Amiga OS 3.9 PPC - WarpOS - PowerPC Exception
Hello, sorry for bad english also im amiga newbie, i've been trying to emulate PPC on amiga os 3.9 and i got this error:
https://ibb.co/8D9rW24 my winuae setup: CPU - 68060, fastest possible, unimplemented CPU emu, MMU, FPU - CPU Internal, unimplemented fpu emu Chipset - Aga, A4000, Wait for blitter, Sprites and Sprites vs. Playfield Adv. Chipset - Compatible Settings ROM - (A4000) rev 40.68 (512k), New UAE (128k, ROM, Direct) RAM - Chip - 2mb, Z3 Fast - 128mb, rest at none Expansions - Phase 5 Cyberstorm, Cyberstorm PPC, Cyberstorm PPC (128k), Accelerator board memory - 128mb, uaescsi.device RTG Board - UAE Zorro III First i installed amiga os 3.9 -> BB1 -> BB2 -> PowerPC Support from amiga cd -> WarpUP_V40 -> WarpUP_V40Upd -> WarpUp_V51Upd -> Warp3D, am i missing something? I can provide any screenshots and logs just to make it work, thanks for any help Last edited by Amcio; 09 September 2019 at 23:47. |
10 September 2019, 08:04 | #2 |
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 6,985
|
You are missing a 3D graphics card. There is none emulated by WinUAE yet, so you cannot run Warp3D on WinUAE. Try Wazp3D instead. It is a software replacement for Warp3D which works without hardware 3D.
|
10 September 2019, 13:11 | #3 |
Registered User
Join Date: Sep 2019
Location: Poland
Posts: 39
|
Thanks for the reply, sorry for dumb question but when i install wazp3d:
If you are using WinUAE 68k then copy Wazp3D.library-winuae TO LIBS:Warp3D.library copy soft3d.library TO LIBS:soft3d.library and PC side copy soft3d.dll to the WinUAE directory WinUAE need "Miscellaneous panel/Native code execution" to be enabled (note that renderer:hard only works on 32 bits screeenmode) should i copy Wazp3D.library-winuae and rename it to Warp3D.library? Wazp3d Prefs works now. but i cant run the cow3d... i downloaded the 68060.library and copied it to libs Last edited by Amcio; 10 September 2019 at 13:33. |
10 September 2019, 13:29 | #4 |
Banned
Join Date: Aug 2005
Location: London / Sydney
Age: 47
Posts: 20,420
|
|
11 September 2019, 00:57 | #5 |
Registered User
Join Date: Sep 2019
Location: Poland
Posts: 39
|
Yes, i have done that but i cant run cow3d now, im getting ramlib error, im looking all over the internet for similiar problems but didnt found solution, im running out of ideas, is there a program to check what i'm doing wrong? thanks for the help so far
Last edited by Amcio; 11 September 2019 at 02:07. |
11 September 2019, 08:51 | #6 | |
Registered User
Join Date: Aug 2014
Location: Brindisi (Italy)
Age: 70
Posts: 8,248
|
Quote:
On OS3 PPC you must use Wazp3D.library-full (rename Warp3D) of course you can only have software emulation. This is my OS3 AfA OS PPC, Cow3D works well: [ Show youtube player ] Last edited by AMIGASYSTEM; 11 September 2019 at 09:00. |
|
11 September 2019, 11:07 | #7 |
Registered User
Join Date: Sep 2019
Location: Poland
Posts: 39
|
I can't believe but it works!!!!!!! thanks alot everyone, it's slow as hell how can i speed it up? any demos for ppc work under wazp3d?
Last edited by Amcio; 11 September 2019 at 11:12. |
11 September 2019, 12:45 | #8 |
Registered User
Join Date: Sep 2019
Location: Poland
Posts: 39
|
i managed to run 1 demo and 1 intro, none of encore demos work, whats up with that, should any of them work??
|
11 September 2019, 13:50 | #9 |
Registered User
Join Date: Aug 2014
Location: Brindisi (Italy)
Age: 70
Posts: 8,248
|
|
11 September 2019, 23:12 | #10 |
Registered User
Join Date: Sep 2019
Location: Poland
Posts: 39
|
sure i managed to run this demo:
http://www.pouet.net/prod.php?which=1103 and 3 mankind intros (violent dumb is demo actually): http://www.pouet.net/prod.php?which=15055 http://www.pouet.net/prod.php?which=6623 http://www.pouet.net/prod.php?which=6622 |
12 September 2019, 00:30 | #11 |
Registered User
Join Date: Sep 2019
Location: Poland
Posts: 39
|
mankind works so well with wazp3d i managed to run deathtrial:
http://www.pouet.net/prod.php?which=823 btw mawi demos always gives me this error (screenshot 1) and encore always this error (screenshot 2) |
12 September 2019, 00:33 | #12 |
Registered User
Join Date: Aug 2014
Location: Brindisi (Italy)
Age: 70
Posts: 8,248
|
It is confirmed to me does not work, OS3 PPC however is not very functional and is also unstable, read the thread dedicated:
http://eab.abime.net/showthread.php?t=75062 |
12 September 2019, 00:46 | #13 |
Registered User
Join Date: Sep 2019
Location: Poland
Posts: 39
|
do you mean mawi and encore demos?
Last edited by Amcio; 12 September 2019 at 00:51. |
12 September 2019, 01:08 | #14 |
Registered User
Join Date: Aug 2014
Location: Brindisi (Italy)
Age: 70
Posts: 8,248
|
Same doesn't even work mawi demos, same errors
|
12 September 2019, 09:43 | #15 |
Registered User
Join Date: Sep 2011
Location: Paris/France
Posts: 274
|
Hello
There is no WarpOS specific version of Wazp3D so using Wazp3D.library-full (that is 68k soft only) may lead to some errors With Wazp3D I have been succesfull to run some ppc mawi & encore demos buuut only inside OS4.1/WinUAE-ppc or Morphos/MacBook On OS4 it will also need the "rewarp" emulation package to make the glue Warpos library -> OS4 library Some of those démos dont runs for obscure reasons: mainly because they assume they are running on the old warpos ppc Warp3D For example: There was a bug because a demos asked for peculiar Warp3D version and subversion Alain Thellier - Wazp3D |
12 September 2019, 12:18 | #16 |
Registered User
Join Date: Sep 2019
Location: Poland
Posts: 39
|
Thanks for the information thellier.
By luck i got amiga os 4.1 on winuae and i have tried 2 encore demos - sulaco and by night, they work but the screen is wrong, whats up with that? also works very slow, also how do i install rewarp - just copy libs? also should i install warpos on os 4.1? also can you tell me what i need to install? (Sorry for newbie questions) Thanks for help Last edited by Amcio; 12 September 2019 at 12:30. |
12 September 2019, 12:56 | #17 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 1,993
|
Looks like either you are missing the 640x480x16 screenmode or are promoting it to (probably) 800x600.
|
12 September 2019, 13:19 | #18 |
Registered User
Join Date: Sep 2019
Location: Poland
Posts: 39
|
thanks I added manually it was missing - 640x480x16 now it looks like this (screenshot) , is it okay?
|
12 September 2019, 15:18 | #19 |
Registered User
Join Date: Sep 2011
Location: Paris/France
Posts: 274
|
If i remenber well ReWarp only need the the two .Library to be copied in LIBS: as you did
Real warpos dont seems to be needed at all Wazp3D for OS4 is very slow inside WinUAE as it can render only as software (WinUAE ppc dont have a native interface to call x86 code) You can also try this for 2D games http://aminet.net/package/driver/vid...hCompositeTags |
12 September 2019, 15:19 | #20 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 1,993
|
Looks better but it does not seem to fill the screen?
Also, OS4.1 comes with the old wosemu libs. No need to upgrade those to ReWarp. That is really only for the newer PPC CPUs/systems. Or if you want to play FreeSpace_WOS with a Radeon card. But then again, FreeSpace is now OS4 native. It is slow as it is software rendering. As a comparision, those encore demos run at 50fps (which it is capped at) on >500MHz PPC systems with HW rendering (Voodoo3/Radeon 9200). Also, with HW rendering, windowed seems to be faster. Not sure if that is the case with SW rendering. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WarpUP - PowerPC Program Exception - Please, help! | jurassicman | support.Hardware | 25 | 01 September 2022 04:58 |
ScummVM WarpOS PPC | drluking | support.Apps | 6 | 29 September 2018 23:29 |
Cyberstorm PPC powerpc.library lockup | matt3k | support.Hardware | 2 | 05 February 2017 04:37 |
SiN WarpOS/PPC Game | fitzsteve | request.Old Rare Games | 7 | 03 May 2011 10:19 |
ppc.library and WarpOS | oldpx | support.Apps | 5 | 23 August 2002 16:57 |
|
|