Another new A500 accelerator option HC533

obitus1990 · 17 April 2018, 17:01

Saw this on eBay this morning... (also for sale on Sordan.ie):

https://www.ebay.com/itm/New-Turbo-C...72.m2749.l2649

PR77 · 18 April 2018, 07:06

Nice design. That is my target goal, but I'm using the 68SEC000 - and making it open source.

18 April 2018, 07:40

Turbo Card HC533 33MHz 8MB RAM IDE Amiga 500 on Sordan Electronics Webshop

https://sordan.ie/product/583/turbo-...ide-amiga-500/

talybont · 18 April 2018, 11:16

Nice looking board. The more the merrier.

E-Penguin · 24 April 2018, 17:40

Anybody know how/if it handles AutoConfig? I'm thinking of my A590 scsi.

obitus1990 · 24 April 2018, 18:13

I'll let you know this evening when I get home, and plug my A590 into the computer with the newly arrived HC-533. Is that you, Daniel?

E-Penguin · 24 April 2018, 20:39

Ha guilty as charged.

Actually I'm not so bothered about the ide or accelerated processor, but the last on-socket memory board I tried didn't show up when the a590 was plugged in (A590 ram disabled). And it's memory I need for whdload goodness. The 2mb on the A590 just isn't quite enough.

PR77 · 24 April 2018, 21:37

Whoever has one of these, are you able to tell me if on the back of the PCB there are the ADDRESS and DATA bus terminating resistor packs? On later Amiga 500s (from Rev 6) the RP105...110 were fitted and I would to know if double terminated bus signals (resistors would then be parallel) causes issues.

Thanks!

sordan · 11 June 2018, 18:49

Many people asked us already so we have a good news about TURBO CARD HC533 33MHZ 8MB RAM IDE for AMIGA 500.

We have a new small batch in stock right now ready to despatch within 1 working day but there are only 10 pieces in stock this time so please be hurry if you won`t missed it again.

There is a free shipping worldwide for this item (tracked + 150 EUR insurance to any country worldwide). Please choose during checkout "shipping to Ireland" and system will add 0% as a shipping cost and then state your country normally. Payment by card or Paypal only. No bank transfer accepted for this item.

There is also a gift included for all 10 turbo cards - IDE - CF adapter, tested and recommended to use with this card which does not required extra power to use a CF card.

https://sordan.ie/product/583/turbo-...ide-amiga-500/

Thanks.

sordan · 11 June 2018, 20:49

Sorry, all gone now.

gulliver · 11 June 2018, 20:54

Quote:

Originally Posted by sordan

Sorry, all gone now.

Seems you have a solid product.

sordan · 25 June 2018, 20:44

10 more pieces in stock right now.

obitus1990 · 25 June 2018, 21:02

I've had the card since April, and, it's a solid performer.

indigolemon · 26 June 2018, 00:03

Anyone tried it in a 1000?

Amiga4000 · 26 June 2018, 00:35

Just ordered mine!!!

And a FREE CF card adapter too!!!
This store has the best shipping program on the planet!!!

Thanks for adding stock!

demolition · 26 June 2018, 09:08

Anyone know whether it will work in an A2000?

Methanoid · 29 June 2018, 14:40

Quote:

Originally Posted by kirk_m

I'll let you know this evening when I get home, and plug my A590 into the computer with the newly arrived HC-533. Is that you, Daniel?

http://www.bigbookofamigahardware.co...t.aspx?id=2058 says this includes KS 3.1 onboard with a jumper to use onboard Rom (presumably could make that a switch?).

Does anyone know IF you can re-program the Rom on the accelerator (to say 2.0 or 3.1 with mods)?

"There is no indicated fallback option to 7Mhz mode" - so how well does that work for games.. presumably some just run silly fast and stupid?

Methanoid · 29 June 2018, 14:47

Quote:

Originally Posted by demolition

Anyone know whether it will work in an A2000?

see link I posted

Methanoid · 29 June 2018, 14:48

Quote:

Originally Posted by sordan

10 more pieces in stock right now.

Why does BBOAH say 3.1/Onboard but jumper says Oktagon/Oktapussy... do you have a manual for this?

indigolemon · 29 June 2018, 16:54

Quote:

Originally Posted by Methanoid

Why does BBOAH say 3.1/Onboard but jumper says Oktagon/Oktapussy... do you have a manual for this?

Yeah, wondered this myself, I've only tried it in my A1000 to see, and got nowhere with the jumper in either position. Cracking open my A500 tonight to try it there

17 April 2018, 17:01	#1
obitus1990 Registered User Join Date: May 2016 Location: Mandeville USA Posts: 203	Another new A500 accelerator option HC533 Saw this on eBay this morning... (also for sale on Sordan.ie): https://www.ebay.com/itm/New-Turbo-C...72.m2749.l2649

26 June 2018, 00:35	#15
Amiga4000 Registered User Join Date: Nov 2014 Location: The Ford Galaxy Posts: 214	Just ordered mine!!! And a FREE CF card adapter too!!! This store has the best shipping program on the planet!!! Thanks for adding stock! Last edited by Amiga4000; 26 June 2018 at 03:19.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help me decide on the best video option (A500)	alpine9000	New to Emulation or Amiga scene	26	12 April 2016 05:50
What's the best A500 hard drive option in 2015?	Starglider 2	Hardware mods	10	22 April 2015 18:04
Which A500 accelerator?	Mustangjeff	Retrogaming General Discussion	23	10 January 2014 10:26
Accelerator for my A500	RuitjesRaver	MarketPlace	16	18 October 2005 16:49
A500 Accelerator!!!	Heavyweight7t6	MarketPlace	0	05 May 2005 17:38

18 April 2018, 07:06	#2
PR77 Registered User Join Date: Oct 2017 Location: Germany Posts: 193	Nice design. That is my target goal, but I'm using the 68SEC000 - and making it open source.

18 April 2018, 07:40	#3
MalleB Posts: n/a	Turbo Card HC533 33MHz 8MB RAM IDE Amiga 500 on Sordan Electronics Webshop https://sordan.ie/product/583/turbo-...ide-amiga-500/

18 April 2018, 11:16	#4
talybont Registered User Join Date: Oct 2016 Location: Norway Posts: 170	Nice looking board. The more the merrier.

24 April 2018, 17:40	#5
E-Penguin Banana Join Date: Jul 2016 Location: Darmstadt Posts: 1,213	Anybody know how/if it handles AutoConfig? I'm thinking of my A590 scsi.

24 April 2018, 18:13	#6
obitus1990 Registered User Join Date: May 2016 Location: Mandeville USA Posts: 203	I'll let you know this evening when I get home, and plug my A590 into the computer with the newly arrived HC-533. Is that you, Daniel?

24 April 2018, 20:39	#7
E-Penguin Banana Join Date: Jul 2016 Location: Darmstadt Posts: 1,213	Ha guilty as charged. Actually I'm not so bothered about the ide or accelerated processor, but the last on-socket memory board I tried didn't show up when the a590 was plugged in (A590 ram disabled). And it's memory I need for whdload goodness. The 2mb on the A590 just isn't quite enough.

24 April 2018, 21:37	#8
PR77 Registered User Join Date: Oct 2017 Location: Germany Posts: 193	Whoever has one of these, are you able to tell me if on the back of the PCB there are the ADDRESS and DATA bus terminating resistor packs? On later Amiga 500s (from Rev 6) the RP105...110 were fitted and I would to know if double terminated bus signals (resistors would then be parallel) causes issues. Thanks!

11 June 2018, 18:49	#9
sordan Registered User Join Date: Oct 2017 Location: Dublin / Ireland Posts: 10	Many people asked us already so we have a good news about TURBO CARD HC533 33MHZ 8MB RAM IDE for AMIGA 500. We have a new small batch in stock right now ready to despatch within 1 working day but there are only 10 pieces in stock this time so please be hurry if you won`t missed it again. There is a free shipping worldwide for this item (tracked + 150 EUR insurance to any country worldwide). Please choose during checkout "shipping to Ireland" and system will add 0% as a shipping cost and then state your country normally. Payment by card or Paypal only. No bank transfer accepted for this item. There is also a gift included for all 10 turbo cards - IDE - CF adapter, tested and recommended to use with this card which does not required extra power to use a CF card. https://sordan.ie/product/583/turbo-...ide-amiga-500/ Thanks.

11 June 2018, 20:49	#10
sordan Registered User Join Date: Oct 2017 Location: Dublin / Ireland Posts: 10	Sorry, all gone now.

25 June 2018, 20:44	#12
sordan Registered User Join Date: Oct 2017 Location: Dublin / Ireland Posts: 10	10 more pieces in stock right now.

26 June 2018, 00:03	#14
indigolemon Bit Copying Bard Join Date: Jan 2017 Location: Kelty, Fife, Scotland Age: 41 Posts: 1,293	Anyone tried it in a 1000?

25 June 2018, 21:02	#13
obitus1990 Registered User Join Date: May 2016 Location: Mandeville USA Posts: 203	I've had the card since April, and, it's a solid performer.

26 June 2018, 09:08	#16
demolition Unregistered User Join Date: Sep 2012 Location: Copenhagen / DK Age: 43 Posts: 4,190	Anyone know whether it will work in an A2000?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)