Installing ACA1233n

[Ulysses13]

Hello.

I've had an ACA1233n 40Mhz in my A1200 for a little while.

It appears to be working fine just by simply being inserted in the expansion slot. I'm running AmigaOS 3.1.4

The Individual Computers site said I did't need to do anything else other than run the ACAtool application from their site, which I have done, and acatool has been copied to C.

I see the extra memory and SysInfo shows my CPU and speed increase. There are a couple of things I'm confused about though:

1. On boot I still get a message telling me that the 68030 has been found but a CPU library is missing.
2. The MMU is shown in Sysinfo as 'NOT WORKING'

So, just running acatool isn't enough, can anyone point me in the direction of what other steps I need to take?

I'll be setting up OS3.2 when it arrives, and I did see that comes with generic libraries for other processors like the 030 as part of the installation - but the Hyperion guys still say to ideally use the one that comes for your accelerator, so I guess I'm looking for that...?

[Romanujan]

Get http://aminet.net/package/util/libs/MMULib

[bubbob42]

Originally Posted by Ulysses13

Hello.
I'll be setting up OS3.2 when it arrives, and I did see that comes with generic libraries for other processors like the 030 as part of the installation - but the Hyperion guys still say to ideally use the one that comes for your accelerator, so I guess I'm looking for that...?

There is no manufacturer-supplied 68030.library. Install the MMU-library package supplied with OS3.2 as contributed by ThoR or his full package from here:

http://aminet.net/util/libs/MMULib.lha

Hint: During installation you'll be asked whether you have an "older" ACA accelerator in your system. For the 1233n, you should select "no".

[Ulysses13]

Thanks guys! Looking forward to a nice fast OS3.2 setup when my CD arrives....