Amiga A500, A500+ RGB to HDMI adapters V2

[Bmt_HR]

Hi,

I have for sale new and tested RGB to HDMI V2 adapter. For completing HDMI output you need Raspberry Pi Zero and mini HDMI to HDMI cable which is not included.

Only assembled adapter include.

V1 adapter: Price is 22EUR + shipping

V2 adapter: Price is 27EUR + shipping

Payment over PayPal or IBAN. PayPal as friend or family or You paying a fee.

Shipping worlwide, ask for shipping price!

Thank you!

[Rod_cl]

Hi,
nice... do you know if it can be used on a CDTV or just A500 and A1000?
Best

[Bmt_HR]

I tested adapters on A500, A500+ only... But I think that adapter must work on CDTV. Look at this link: http://www.amiga-news.de/en/news/AN-...-00006-EN.html

BR

[Torti-the-Smurf]

Is a A600 version possible ? That would be awesome ! Anyway, thank you

[Bmt_HR]

For A600 you have to solder about 15 wires on mainboard, there is no other solution for now.

[Torti-the-Smurf]

So there is hope
In any case, thank you all, for still making new Hardware for our beloved Amiga`s

[Rod_cl]

Thanks... ill look at the link..

Originally Posted by Bmt_HR

I tested adapters on A500, A500+ only... But I think that adapter must work on CDTV. Look at this link: http://www.amiga-news.de/en/news/AN-...-00006-EN.html

BR

[obitus1990]

Originally Posted by Bmt_HR

For A600 you have to solder about 15 wires on mainboard, there is no other solution for now.

Not entirely true:


https://github.com/c0pperdragon/Amig...ideo/issues/37

[Bmt_HR]

Originally Posted by kirk_m

Not entirely true:


https://github.com/c0pperdragon/Amig...ideo/issues/37

Ups, I didn't saw this till now. Sorry, my mistake. Very interesting!

[kipper2k]

to add to the a600 version i have also designed a version that fits and works in the a500/a1k/a2k with a relocated hdmi cable for a better fitting.

[Torti-the-Smurf]

But there is no simple plug&play solution for the A600, right ? Would it even be possible ?

[solarmon]

Originally Posted by Torti-the-Smurf

But there is no simple plug&play solution for the A600, right ? Would it even be possible ?

I'm currently working on this Denise PLCC hat version. It is not low profile and will spoil certain expansion boards.

[kipper2k]

Originally Posted by Torti-the-Smurf

But there is no simple plug&play solution for the A600, right ? Would it even be possible ?

Short answer, yes, it will be possible, no soldering required, I am rounding up the bits and pieces. and it will not interfere with accelerator cards etc. The A500 version shouldnt interfere also

[Torti-the-Smurf]

Originally Posted by kipper2k

Short answer, yes, it will be possible, no soldering required, I am rounding up the bits and pieces. and it will not interfere with accelerator cards etc. The A500 version shouldnt interfere also

Originally Posted by solarmon

I'm currently working on this Denise PLCC hat version. It is not low profile and will spoil certain expansion boards.

You guys are AWESOME Thank you very much

[lesta_smsc]

Originally Posted by solarmon

I'm currently working on this Denise PLCC hat version. It is not low profile and will spoil certain expansion boards.

Would there be an option to have a PLCC mount but then connected via wired to another area hence preventing interfering with expansion boards?

[solarmon]

Originally Posted by lesta_smsc

Would there be an option to have a PLCC mount but then connected via wired to another area hence preventing interfering with expansion boards?

I am also working on such a PLCC breakout hat. This can have the RGBtoHDMI small board sit directly on top of it (same pin layout and order), or the breakout pins can just be used to extend the signals to the RGBtoHDMI small board located elsewhere.

[Bmt_HR]

Nice projects here!!!

[ChadsArcade]

I tried fitting mine in the CDTV, one of the large capacitors stops it from being seated fully. Also the height of the combined board with the Pi would be too much and stop the lid from closing.


A breakout board for the Denise such as kipper2k's for the A600, and the HDMI/Pi boards on a ribbon would be a nice solution. It would be nice if these could be placed in the expansion bay with the HDMI connector on the back plate.


Else, a redesigned version with the Pi and HDMI boards laid out flat and on the other side of the Denise chip to the A500 version may work. Height might still be an issue though as it would sit over some existing socketed ICs.

Originally Posted by Rod_cl

Hi,
nice... do you know if it can be used on a CDTV or just A500 and A1000?
Best

[solarmon]

Originally Posted by ChadsArcade

I tried fitting mine in the CDTV, one of the large capacitors stops it from being seated fully. Also the height of the combined board with the Pi would be too much and stop the lid from closing.


A breakout board for the Denise such as kipper2k's for the A600, and the HDMI/Pi boards on a ribbon would be a nice solution. It would be nice if these could be placed in the expansion bay with the HDMI connector on the back plate.


Else, a redesigned version with the Pi and HDMI boards laid out flat and on the other side of the Denise chip to the A500 version may work. Height might still be an issue though as it would sit over some existing socketed ICs.

I'm working on this custom board design. Would that be a suitable fit inside the CDTV?

[ChadsArcade]

Hi Solarmon,

Is Denise Pin 1 to the right in your diagram? That should clear the caps, but the height of the Pi in the adapter, combined with the height of the adapter in the Denise socket, may still cause problems with closing the lid.

Chad