Recoverable Alert Error 0003 8007 when opening "ed"

jman · 18 February 2023, 21:15

Hi, i have turned on my old A600 after some years. Current config:

Code:

Kickstart 37.350 (2.05)
Workbench 39.29 (3.0) on CF 4gb
1mb expansion

Other than that I'd say it's stock and so far it seems to work just fine. I only have one issue: everytime I open the "Ed" editor from a CLI I get this error

Code:

Recoverable Alert
Error: 0003 8007
Task: 00021708

after LMB (left mouse click) I get back to Workbench and get this other error:

Code:

ramlib program failed
program failed (error #80000004)
wait for disk activity to finish

and then finish into a Guru Meditation.

That's not a critical error because I can use MicroEmacs, was just curious if it's signaling a deeper issue.

Thanks!

Nor Bert · 18 February 2023, 23:38

Kickstart too low or WB too high.
Change one of these things.

You can also copy ED from WB2.1 to WB3.0.
There will be no more yellow GURU.

jman · 19 February 2023, 00:30

Quote:

Originally Posted by Nor Bert

Kickstart too low or WB too high.
Change one of these things.

Ok, I've reproduced the issue also on FS-UAE and started the virtual A600 with a Workbench 2.1 38.36 ADF file.

With that version of WB, Ed (version 2.00) works just fine.

Quote:

You can also copy ED from WB2.1 to WB3.0.

There will be no more yellow GURU.

Curiosly enough, if I copy Ed from the WB2.1 floppy to my Workbench 3.0 compact flash, Ed still crashes, unsure why (I assume ED is trying to open a library at some invalid address). Anyway, not a big deal.

Thanks a lot!

Matt_H · 19 February 2023, 00:33

Yup, Workbench 3.0 on Kickstart 2.0 is going to cause all sorts of problems. As Nor_Bert says, switch to Workbench 2.1 (v38) or Kickstart/Workbench 3.1 (v40) or newer.

18 February 2023, 21:15	#1
jman Registered User Join Date: Nov 2010 Location: . Posts: 351	Recoverable Alert Error 0003 8007 when opening "ed" Hi, i have turned on my old A600 after some years. Current config: Code: Kickstart 37.350 (2.05) Workbench 39.29 (3.0) on CF 4gb 1mb expansion Other than that I'd say it's stock and so far it seems to work just fine. I only have one issue: everytime I open the "Ed" editor from a CLI I get this error Code: Recoverable Alert Error: 0003 8007 Task: 00021708 after LMB (left mouse click) I get back to Workbench and get this other error: Code: ramlib program failed program failed (error #80000004) wait for disk activity to finish and then finish into a Guru Meditation. That's not a critical error because I can use MicroEmacs, was just curious if it's signaling a deeper issue. Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
VBCC "kick13" error in "exec\interrupts.h"	Cyprian	Coders. C/C++	8	12 August 2022 23:44
Playing "Legend of Faerghail", suddenly "Software error - Task Held"?	arto	support.WinUAE	12	05 January 2016 18:07
"Exception "Line 1111 Emulator" ($2c) Error at $1004" when exiting game	demolition	support.WinUAE	15	30 November 2012 16:43
req.Help Concerning "Settlers" (spoiler alert!)	Shoonay	support.Games	15	11 April 2005 11:47
"DOS-Error #205 (object not found) on reading "devs:kickstarts/kick 40068.a4000"	Unregistered	New to Emulation or Amiga scene	1	22 December 2004 09:48

18 February 2023, 23:38	#2
Nor Bert Norbert Join Date: Jan 2022 Location: Poland Posts: 121	Kickstart too low or WB too high. Change one of these things. You can also copy ED from WB2.1 to WB3.0. There will be no more yellow GURU.

19 February 2023, 00:33	#4
Matt_H Registered User Join Date: Jul 2008 Location: Boston, MA Posts: 943	Yup, Workbench 3.0 on Kickstart 2.0 is going to cause all sorts of problems. As Nor_Bert says, switch to Workbench 2.1 (v38) or Kickstart/Workbench 3.1 (v40) or newer.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)