![]() |
![]() |
#1 |
Registered User
Join Date: Jun 2019
Location: Saltdean, United Kingdom
Posts: 148
|
BlizKick, BlizzardPPC, and multiple reboots
Good evening,
I have an A1200T with BlizzardPPC, FastATA, OS3.9, and Oxypatcher. Booting from power-on takes minutes, as it needs to reboot at least three times for the various hardware drivers and software solutions to add in their bits of code. I've read that BlizKick can alleviate this, as you can use executables as modules within it. Has anyone done this for the following startup programs, and did it work reliably?
Thanks, Paul |
![]() |
![]() |
#2 | |
Registered User
Join Date: May 2018
Location: Germany, Baden-Wuerttemberg
Posts: 387
|
Quote:
Setpatch is also a bit tricky but newer versions have a noreboot option that you can set if something, e.g. oxypatcher, reboots the machine later on anyway. |
|
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2009
Location: Germany
Posts: 3,326
|
The ata3.driver has also a resident on/off option. Use "set echo on" or the "interactive" option on top of you startup-sequence to trace/show what happens (what does the resets). Usually you should be able to start with only one reset at boot time. And you may post your S-S.
|
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2004
Location: finland
Posts: 1,850
|
The latest Oxypatcher (3.14) doesn't reboot anymore.
|
![]() |
![]() |
#5 |
Registered User
Join Date: Jun 2019
Location: Saltdean, United Kingdom
Posts: 148
|
Okay, here goes... my startup-sequence:
Code:
C:OpenOxyPPort C:CheckLMB IF WARN SYS:Prefs/ATA3Prefs ENDIF C:ATA3.driver QUIET RESIDENT C:stack 8192 C:KeyCheck 59 IF WARN execute S:CD32-startup ENDIF ; $VER: Startup-Sequence_HardDrive 40.2 (25.2.93) ; Startup-Sequence for hard drive systems C:SetPatch QUIET ;SKIPROMUPDATES scsi.device ; StackAttack: Programs started after StackAttack will have a minimum ; Stack of 5000 bytes that will be further increased by 500 bytes C:StackAttack MIN=5000 ADD=500 CyReq ;for ReqAttack C:Version >NIL: C:AddBuffers >NIL: DF0: 15 FailAt 21 C:MakeDir RAM:T RAM:Clipboards Resident >NIL: C:Assign PURE Resident >NIL: C:Execute PURE C:MountENV NOREQ Assign >NIL: T: RAM:T Assign >NIL: CLIPS: RAM:Clipboards Assign >NIL: REXX: S: Assign >NIL: PRINTERS: DEVS:Printers Assign >NIL: KEYMAPS: DEVS:Keymaps Assign >NIL: LOCALE: SYS:Locale Assign >NIL: LIBS: SYS:Classes ADD Assign >NIL: HELP: LOCALE:Help DEFER BindDrivers C:Mount >NIL: DEVS:DOSDrivers/~(#?.info) C:LoadMonDrvs SetEnv Language "english" SetEnv Workbench $Workbench SetEnv Kickstart $Kickstart UnSet Workbench UnSet Kickstart C:AddDataTypes REFRESH QUIET Run >NIL: "C:VisualPrefs" C:IPrefs C:FPPrefs C:ConClip Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities IF EXISTS S:User-Startup Execute S:User-Startup EndIF Resident Execute REMOVE Resident Assign REMOVE C:LoadWB copy ENVARC:SYS/def_ram.info RAM:Disk.info EndCLI >NIL: My user-startup is just for program assigns. Total time to usable system: 1 min 50 secs Thanks, Paul Last edited by amipal; 01 July 2020 at 11:51. Reason: Added time to boot. |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2019
Location: Saltdean, United Kingdom
Posts: 148
|
|
![]() |
![]() |
#7 | ||
Registered User
Join Date: Jun 2019
Location: Saltdean, United Kingdom
Posts: 148
|
Quote:
Quote:
Thanks, Paul |
||
![]() |
![]() |
#8 |
Registered User
Join Date: Oct 2009
Location: Germany
Posts: 3,326
|
With the new Oxypatcher version you should save one reset. If you remove the "Resident" option from ata3.driver then it doesn't do a reset but it behaves a bit different. The default SetPatch call should do a reset too. The switches NOROMUPDATE and/or DISABLEROMMODUELS will/shall avoid a reset.
Does the BlizzardPPC card do a reset to remap ROM to RAM? |
![]() |
![]() |
#9 | |
Registered User
Join Date: May 2018
Location: Germany, Baden-Wuerttemberg
Posts: 387
|
Quote:
|
|
![]() |
![]() |
#10 |
Registered User
Join Date: Jun 2019
Location: Saltdean, United Kingdom
Posts: 148
|
|
![]() |
![]() |
#11 |
Registered User
Join Date: Mar 2004
Location: finland
Posts: 1,850
|
Got it long time ago, here: https://www.dropbox.com/s/x2hqi6kx6k...er314.lha?dl=0
|
![]() |
![]() |
#12 |
Supernormal
Join Date: Jul 2007
Location: Istanbul / Turkey
Age: 43
Posts: 1,416
|
I have a Blizzard 060 (used to have a blizzardppc and bvision) on my 1200 and FastATA MK4. Using blizkick is fairly straightforward but with ata3.driver, you need a second or a third reboot in order to get drives that are after 4gb barrier.
I think if you run ata3.driver before blizkick, it gets removed from memory after the reboot. And if you run ata3.driver after blizkick, it needs to reboot the system once so as to activate partitions after 4gb barrier. |
![]() |
![]() |
#13 | |
Registered User
Join Date: Jun 2019
Location: Saltdean, United Kingdom
Posts: 148
|
Quote:
:edit Downloaded and installed, and just done a test render with C4D. All working fine, and OxyPatcher patching away. Thanks once again, zipper! Last edited by amipal; 01 July 2020 at 00:42. |
|
![]() |
![]() |
#14 | |
Registered User
Join Date: Jun 2019
Location: Saltdean, United Kingdom
Posts: 148
|
Quote:
That's a good tip on the startup-sequence placement for ata3.driver, though. |
|
![]() |
![]() |
#15 | ||
Registered User
Join Date: Oct 2009
Location: Germany
Posts: 3,326
|
Quote:
Quote:
Code:
BlizKick ; can load the OS 3.9 modules, kick ROM with reset ATA3.driver ; without resident option (can also set with ATA3Prefs!) SetPatch ; with the option that doesn't force a reset and no ROM modules loading (instead load modules with BlizKick) If you read the manual of the three programs and understand it it should be more clear. |
||
![]() |
![]() |
#16 | |
Supernormal
Join Date: Jul 2007
Location: Istanbul / Turkey
Age: 43
Posts: 1,416
|
Quote:
|
|
![]() |
![]() |
#17 |
Registered User
Join Date: Oct 2009
Location: Germany
Posts: 3,326
|
I'm not sure what you mean be "this way", but generally it will work. You have to make sure that ATA3.driver is running/used. Filesystem limits should also take into account. You can use HDDReport to check if access to >4GB is ok.
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Settings lost between reboots | cdurbin | support.WinUAE | 2 | 20 July 2019 17:16 |
A1200 reboots when inserting Floppy disk | madlax | support.Other | 1 | 12 April 2019 01:18 |
A1200 random reboots and hangs - PSU issue? | john1979 | support.Hardware | 17 | 24 June 2012 20:13 |
BlizKick | NovaCoder | support.Apps | 10 | 31 January 2009 21:48 |
How can I reduce the number of reboots on start-up? | keropi | support.Apps | 2 | 08 December 2005 13:19 |
|
|