X-Copy / Cyclone Hardware Dongle

mr.vince · 27 April 2009, 23:09

Got a batch of nos and used hardware dongles for Cyclone, as available in the X-Copy & Tools software bundle. Did not want to toss them, so here they are (please note that I have more than shown on the pictures).

I do have short ones, mid-sized ones and large ones. There also are ones with casings, grey and black, most of them in good used condition. They all work the same, but these are different revisions, as sold "back then".

Please note that this is the version without a GAL chip. The chipped version, while allowing some kind of verify (never worked right), does not work on A600 machines and did have some stability issues with new Amigas like A1200 and A4000. It does not work with the very latest version of Cyclone, but with the "usual" ones.

This is a different-size-equal-price scenario. Pick the version you like. They all cost the same:

1 x Cyclone dongle, incl. shipping to EUROPE: EUR 13,-

1 x Cyclone dongle, incl. shipping worldwide: EUR 17,-

Payment via PayPal. PM me with delivery address. I will send you my PayPal address in reply.

Volume discounts possible, so ask your friends if they need one. Will negotiate total price on a case by case basis. Limited quantities only, reserve the right to cancel offer anytime. Please note that is a private sale only. No returns, defective items will be swapped for replacements. Hardware comes without any gurarantee or implication that it will be useful for the duplication of a particular software. This is legacy hardware for collectors. If you want the real deal, have a look at Cyclone20.

I do have a real life, so please allow for a couple of days for reply.

Thank you!

ramparts · 01 December 2011, 02:05

hi do you still have those board dongles and what best price can you make me for one for portugal many thanks Gonçalves

02 April 2015, 01:13

Are any of these still available?

mr.vince · 03 April 2015, 22:09

Yes.

liviux76 · 16 July 2015, 11:27

Hello!
Are these adapters still available?
Do they really help copying protected floppy disks?
Thanks!

Wiking67 · 16 July 2015, 12:35

Have 1 of these are looking for a dongle to syncroexpress

29 September 2015, 17:01

Hi, do you have any left, if so pm me with a price, based in England, thanks

08 October 2017, 22:26

IF you still have some of these can you contact me plz, thanks

jayboy1973 · 14 May 2019, 10:35

hi mr vince do you have any of these available
many thanks jason

AmigaCD32CD · 16 May 2019, 23:01

hi do you have super card ami jim drew dondle?

Amigan123 · 02 July 2019, 16:33

Hi I will soon have some new Cyclone dongles available
made with a manufactured pcb, feel free to PM me for info

Starfox · 15 August 2020, 14:36

Who have this Dongles already available ? I need one for Cyclone

Gringo · 22 August 2020, 17:26

Someone have de code of the Gal (last one) and a PCB Schematic and Component ?

mr.vince · 20 May 2021, 19:45

Sorry, just spotted this. Yes, I do...

mr.vince · 18 April 2023, 07:06

Before you get a feeling of sensation: this thread is outdated. It was written in 2009! All dongles have been sold. Thanks for looking…

Gringo · 19 April 2023, 16:18

Why not an Open Source 2023 "Cyclone Compatible Hardware" for Preservation :3

jotd · 19 April 2023, 16:26

I may have one for sale if I dig deep enough. How much does that sell?

27 April 2009, 23:09	#1
mr.vince Cheesy crust Join Date: Nov 2008 Location: Hawk's Creek Age: 48 Posts: 1,383	X-Copy / Cyclone Hardware Dongle Got a batch of nos and used hardware dongles for Cyclone, as available in the X-Copy & Tools software bundle. Did not want to toss them, so here they are (please note that I have more than shown on the pictures). I do have short ones, mid-sized ones and large ones. There also are ones with casings, grey and black, most of them in good used condition. They all work the same, but these are different revisions, as sold "back then". Please note that this is the version without a GAL chip. The chipped version, while allowing some kind of verify (never worked right), does not work on A600 machines and did have some stability issues with new Amigas like A1200 and A4000. It does not work with the very latest version of Cyclone, but with the "usual" ones. This is a different-size-equal-price scenario. Pick the version you like. They all cost the same: 1 x Cyclone dongle, incl. shipping to EUROPE: EUR 13,- 1 x Cyclone dongle, incl. shipping worldwide: EUR 17,- Payment via PayPal. PM me with delivery address. I will send you my PayPal address in reply. Volume discounts possible, so ask your friends if they need one. Will negotiate total price on a case by case basis. Limited quantities only, reserve the right to cancel offer anytime. Please note that is a private sale only. No returns, defective items will be swapped for replacements. Hardware comes without any gurarantee or implication that it will be useful for the duplication of a particular software. This is legacy hardware for collectors. If you want the real deal, have a look at Cyclone20. I do have a real life, so please allow for a couple of days for reply. Thank you! Last edited by mr.vince; 27 April 2009 at 23:16.

01 December 2011, 02:05	#2
ramparts Registered User Join Date: Apr 2011 Location: porto/portugal Posts: 50	dongles hi do you still have those board dongles and what best price can you make me for one for portugal many thanks Gonçalves

29 September 2015, 17:01	#7
stevie606 Posts: n/a	yclone adaptor Hi, do you have any left, if so pm me with a price, based in England, thanks

08 October 2017, 22:26	#8
MrJoe1973 Posts: n/a	cyclone dongle IF you still have some of these can you contact me plz, thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Final version of X-Copy + Cyclone	fiath	request.Apps	21	06 December 2010 22:32
Xcopy pro & Tools with Cyclone Dongle	teamhack22	request.Apps	5	14 September 2010 20:52
Anyone ever owned an Apex copy dongle?	ElectroBlaster	support.Hardware	7	04 October 2009 18:40
X-Copy Dongle	Eclipse	support.Hardware	13	27 April 2009 23:32
Cyclone / copy issues	Bernd	support.Hardware	2	07 October 2002 10:56

02 April 2015, 01:13	#3
Soski Posts: n/a	Are any of these still available?

03 April 2015, 22:09	#4
mr.vince Cheesy crust Join Date: Nov 2008 Location: Hawk's Creek Age: 48 Posts: 1,383	Yes.

16 July 2015, 11:27	#5
liviux76 Registered User Join Date: Jan 2014 Location: BO/Italy Posts: 711	Hello! Are these adapters still available? Do they really help copying protected floppy disks? Thanks!

16 July 2015, 12:35	#6
Wiking67 Blowing Out The Flame Join Date: Apr 2009 Location: Lulea Sweden Age: 57 Posts: 214	Have 1 of these are looking for a dongle to syncroexpress

14 May 2019, 10:35	#9
jayboy1973 Registered User Join Date: May 2019 Location: brisbane australia Posts: 1	hi mr vince do you have any of these available many thanks jason

16 May 2019, 23:01	#10
AmigaCD32CD Registered User Join Date: Dec 2018 Location: London Posts: 41	hi do you have super card ami jim drew dondle?

02 July 2019, 16:33	#11
Amigan123 Registered User Join Date: Feb 2012 Location: Staffordshire Posts: 119	Hi I will soon have some new Cyclone dongles available made with a manufactured pcb, feel free to PM me for info

15 August 2020, 14:36	#12
Starfox Registered User Join Date: Aug 2020 Location: Germany Posts: 18	Who have this Dongles already available ? I need one for Cyclone

22 August 2020, 17:26	#13
Gringo Old Amiga 4000 User Join Date: Jun 2008 Location: Italy Age: 51 Posts: 28	Someone have de code of the Gal (last one) and a PCB Schematic and Component ?

20 May 2021, 19:45	#14
mr.vince Cheesy crust Join Date: Nov 2008 Location: Hawk's Creek Age: 48 Posts: 1,383	Sorry, just spotted this. Yes, I do...

18 April 2023, 07:06	#15
mr.vince Cheesy crust Join Date: Nov 2008 Location: Hawk's Creek Age: 48 Posts: 1,383	Before you get a feeling of sensation: this thread is outdated. It was written in 2009! All dongles have been sold. Thanks for looking…

19 April 2023, 16:18	#16
Gringo Old Amiga 4000 User Join Date: Jun 2008 Location: Italy Age: 51 Posts: 28	Why not an Open Source 2023 "Cyclone Compatible Hardware" for Preservation :3

19 April 2023, 16:26	#17
jotd This cat is no more Join Date: Dec 2004 Location: FRANCE Age: 52 Posts: 8,162	I may have one for sale if I dig deep enough. How much does that sell?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)