27 January 2021, 20:16 | #1 |
Registered User
Join Date: Aug 2019
Location: Germany
Posts: 19
|
Compact Flash Card Prep on Linux FS_UAE
Hello ,
I want to mount in fs - uae a compact flash card where I can play software on it. how to do this ? I have FS-UAE Launcher 3.0.5 and linux mint greetings |
28 January 2021, 12:59 | #2 |
Registered User
Join Date: Jan 2013
Location: Poland
Posts: 40
|
Assuming that you have CF card, that already has been used within an Amiga, you'll need to:
|
28 January 2021, 19:56 | #3 |
Registered User
Join Date: Aug 2019
Location: Germany
Posts: 19
|
lsblk
dmesg: sdc: RDSK (512) sdc1 (DOS^C)(res 2 spb 1) sdc2 (DOS^C)(res 2 spb 1) sdc3 (DOS^C)(res 2 spb 1) Hello all , I do not know myself so well Is that correct so far ? Greetings Last edited by Paperboy; 28 January 2021 at 20:24. |
29 January 2021, 07:16 | #4 |
Registered User
Join Date: Jun 2019
Location: BNE AU
Posts: 216
|
If you're aiming to put on a real amiga, I would add:
hard_drive_0_type = rdb Also, if you get an error when launching fs-uae that the device cannot be found, you may need to run in a terminal: chmod 777 /dev/sdc |
29 January 2021, 07:38 | #5 |
Registered User
Join Date: Jan 2013
Location: Poland
Posts: 40
|
Yup!
Here is mine SD 8GB flashcard, where I have shared AmigaOS and Debian: Code:
sdc: RDSK (512) sdc1 (DOS^C)(res 2 spb 1) sdc2 (DOS^C)(res 2 spb 1) sdc3 (LNX^@)(res 2 spb 1) As for the permission. Code:
~ # ls -l /dev/sdc* brw-rw---- 1 root disk 8, 32 01-29 07:10 /dev/sdc brw-rw---- 1 root disk 8, 33 01-29 07:10 /dev/sdc1 brw-rw---- 1 root disk 8, 34 01-29 07:10 /dev/sdc2 brw-rw---- 1 root disk 8, 35 01-29 07:10 /dev/sdc3 rootand everyone in group diskcan access devices for this flashcard. So either I'll add myself to the disk group (in /etc/groupand /etc/gshadowfor consistency) or just temporary change the permissions for all of those devices as root, before running fs-uae: Code:
~ # chmod o+rw /dev/sdc* As for hard_drive_0_type- it's might be needed for unformatted disks, but in this case, it is fine to omit it, since type will be determined automatically. |
29 January 2021, 08:52 | #6 |
Registered User
Join Date: Aug 2019
Location: Germany
Posts: 19
|
Hey guys I can not make it
I have done everything so far also chmod 777 /dev/sdc I can not find it under directories I already searched but I can't find the CF |
29 January 2021, 12:34 | #7 |
FS-UAE Developer
Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
|
Don't put hard_drive_0 in advanced settings - as it says, it is currently being overriden by current config.
Instead put it in custom configuration (or config file). And if you want to use Workbench 3.1.hdf as your primary hard drive, then use hard_drive_1 instead of hard_drive_0 when adding the disk... |
29 January 2021, 15:59 | #8 | |
Registered User
|
Quote:
The order can change between boots, e.g. sda can become sdb or vice versa. Better use /dev/disk/by-id or /dev/disk/by-uuid (UUID probably doesn't work with Amiga harddrives) instead. You can use Code:
ls -lA /dev/disk/by-uuid Code:
ls -lA /de/disk/by-id |
|
29 January 2021, 16:18 | #9 | ||
Registered User
Join Date: Jan 2013
Location: Poland
Posts: 40
|
Quote:
Quote:
UUIDwill not work for Amiga partitions. Using IDis not great idea either, since depending on the card reader/slot identifier will change. That's why I would suggest to be extra careful there and check twice, before doing anything reckless to your system/drives. |
||
29 January 2021, 16:38 | #10 | |
Registered User
Join Date: Jan 2013
Location: Poland
Posts: 40
|
Quote:
Here is my (working) example of the configuration, where I am using SD card (I've also used to use CF card, without any difference) to boot from, with defined additional "drives" which points to my filesystem under Linux: Code:
[config] amiga_model = A1200/020 kickstart_file = kick.rom uae_cpu_model = 68040 zorro_iii_memory = 131072 # double check device before running, don't forget about permissions hard_drive_0_controller = ide0 hard_drive_0 = /dev/sdc hard_drive_1 = /tmp hard_drive_1_label = z Code:
hard_drive_0 = workbench.hdf hard_drive_1_controller = ide0 hard_drive_1 = /dev/sdc |
|
30 January 2021, 05:37 | #11 |
Registered User
Join Date: Aug 2019
Location: Germany
Posts: 19
|
Hello friends ,
Thank you all very much now it has worked. A big thank you to all of you. Best regards |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Compact Flash Card Prep on Mac | livewirerocks | support.FS-UAE | 14 | 21 January 2022 21:21 |
linux DD command imaging compact flash card for Amiga | leeuwtje | Retrogaming General Discussion | 8 | 02 October 2018 09:06 |
WinUAE prep 8Gb Compact Flash | xArtx | support.WinUAE | 3 | 27 December 2015 06:47 |
Defrag a Compact Flash Card | Nibbler | support.Hardware | 14 | 06 February 2015 08:02 |
8 GB Compact Flash card | Kenan | support.Hardware | 6 | 07 June 2013 20:54 |
|
|