English Amiga Board


Go Back   English Amiga Board > Support > support.FS-UAE

 
 
Thread Tools
Old 13 July 2013, 10:40   #1
oyh
 
Posts: n/a
Any means of mounting a dh9 hard drive?

For some reasons, my hardware setup in the nineties included a dh9 drive. I could specify the mount in Win-UAE, but in FS-UAE, I'm struggling to do so.

In the FS-UAE launcher, only dh0-dh3 can be mounted. I've looked to the configuration options and tried
Code:
hard_drive_9 = /pathxyz
hard_drive_9_label = labelxyz
there. But to no avail.

Is there any means to do this in FS-UAE?
 
Old 13 July 2013, 11:15   #2
roy bates
Registered User
 
Join Date: Apr 2011
Location: birmingham
Age: 55
Posts: 2,827
have you got any harddrive prepping util for the amiga and simply change its designation?

such as the install disk etc.

was it a scsi drive?
roy bates is offline  
Old 13 July 2013, 13:37   #3
oyh
 
Posts: n/a
Quote:
Originally Posted by roy bates View Post
have you got any harddrive prepping util for the amiga and simply change its designation?

such as the install disk etc.

was it a scsi drive?
It was an IDE drive that had 10 partitions. I copied each partition's content into a modern file system (a long time ago) and wanted to indicate to fs-uae which folder to use for which partition. Actually, I only need dh0/dh1/dh2/dh9. I can't just take the dh9 folder as dh3 as there are a lot of legacy scripts where dh9 is used.

In WinUAE's launcher I could select the mount name (eg., dh9) and assign a folder to it. But in FS-UAE, there is no option to do so.

Ok, so for the time being I'm mounting the dh9 folder to dh3 and I've added a
Code:
assign dh9: dh3:
to the startup sequence. That works.

Last edited by oyh; 13 July 2013 at 15:00. Reason: code error
 
Old 13 July 2013, 18:41   #4
FrodeSolheim
FS-UAE Developer
 
FrodeSolheim's Avatar
 
Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
Hi, while FS-UAE Launcher only shows 4 drive configuration boxes, FS-UAE itself support up to 10 drives (DH0 through DH9), so hard_drive_9 should work fine (and I just tested that it does indeed work).

Perhaps there was a configuration error when you specified hard_drive_9? You can check FS-UAE.log.txt (or attach to a post if you want help with it).

Of course, the assign works fine as well
FrodeSolheim is offline  
Old 14 July 2013, 06:49   #5
oyh
 
Posts: n/a
Quote:
Originally Posted by FrodeSolheim View Post
FS-UAE itself support up to 10 drives (DH0 through DH9), so hard_drive_9 should work fine (and I just tested that it does indeed work).
I've just tried again hard_drive_9 and now it works... Must have been some typo. Sorry for the post.
 
Old 14 July 2013, 12:52   #6
FrodeSolheim
FS-UAE Developer
 
FrodeSolheim's Avatar
 
Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
No problem (I'll also add documentation for hard_drive_5..9 to http://fs-uae.net/options)
FrodeSolheim is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mounting FFS hard drive partition under K1.3 Dids support.Other 18 12 July 2021 20:51
Mounting of real hard disk doesn't work anymore mikro support.WinUAE 6 13 May 2012 18:44
Help with Mounting a Hard Drive xsive support.Hardware 6 06 February 2010 19:08
Mounting extra (HDF) drive Nomad of Norad New to Emulation or Amiga scene 9 18 July 2008 20:08
Compact flash drive Vs. 2,5" hard disk drive fc.studio support.Hardware 5 16 June 2007 16:40

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 00:28.

Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Page generated in 0.07671 seconds with 13 queries