subway question

[source]

I have an A500 with a VXL030 and Ram32, flicker free, and an 8meg ram card and a buddha attached to the side expansion. I am wanting to install a subway on the clockport of the buddha. Does the subway or othe clockport hardware for that matter show up on the early hardware diagnostic page with Os3.1?
Is there any special technique to install colckport hardware? Do you need to activate the budha clockport first before it will accept the subway?
Thanks

[FOL]

Originally Posted by source

I have an A500 with a VXL030 and Ram32, flicker free, and an 8meg ram card and a buddha attached to the side expansion. I am wanting to install a subway on the clockport of the buddha. Does the subway or othe clockport hardware for that matter show up on the early hardware diagnostic page with Os3.1?
Is there any special technique to install colckport hardware? Do you need to activate the budha clockport first before it will accept the subway?
Thanks

I have never used a buddah, but if its anything like the deneb, then it would need the clockport activated.
Check the manual or check the Individual Computers homepage. There you can find manuals etc etc.

As for installing it, make sure you get it the correct way round or it will fry.