HD15 to DB9 adapter?

Smiley · 23 November 2006, 10:47

I want to plug my scandoubler into my spectrum gfx card using the input connector.

However the input connector is a DB9 (female) on the spectrum and a HD15 (male) on the scandoubler.

I already bought a M-F vga cable, is it possible to buy a male>male HD15>DB9 adapter?

Thanks

Zetr0 · 23 November 2006, 14:09

Heys smiley

I think you might be after one of these

http://www.phoenix-pcs.co.uk/acatalo...in-F2N163.html

looking at that, i think you will need a jender changer for the db9 but there VERY cheap

I am sure if you look about a bit you could find one cheaper than this
http://cgi.ebay.co.uk/9-Pin-DB9-Seri...QQcmdZViewItem

anyways smiley I hope it helps.

amigakit.com · 23 November 2006, 14:45

If you give me the pin-outs we can make one up for you.

Zetr0 · 23 November 2006, 15:23

@Amigakit

Thats awsome

Smiley · 23 November 2006, 16:04

Quote:

Originally Posted by amigakit.com

If you give me the pin-outs we can make one up for you.

Make a cable or an adapter?

Thanks

amigakit.com · 23 November 2006, 16:33

You can adapt between the 9-pin/15-pin with cable or adapter- you decide. We can do either.

Smiley · 23 November 2006, 17:57

Which is more expensive?

I would probably prefer a Female 15pin > Male 9pin cable at about 20cm to 30cm (ill have to measure)

Whats the price inc P&P for this?

Attached images of both connectors:

amigakit.com · 23 November 2006, 23:12

Cable will cost £6.99

P&P will be 99p

Please provide pin-outs for the cable.

Hope this is OK.

Smiley · 24 November 2006, 00:07

Would it be any cheaper to make an adapter?

EDIT: Sorry but I have found a UK based website selling HD15 (F) to DB9 (M) adapters for £3.82 posted.

I think I will just go with them as its the cheapest option.

If the adapter doesnt work ill come back to you for a custom made cable.

thanks

amigakit.com · 24 November 2006, 00:31

Adapter would be about £1.50 cheaper. If you need anything, get in touch.

Jope · 24 November 2006, 08:58

For the benefit of any future visitors who would want to build one themselves, it would go like this:

Code:

			9-Pin  	15-Pin
Red Video		1 	1
Green Video		2 	2
Blue Video		3 	3
Horizontal Sync		4 	13
Vertical Sync		5 	14
Red GND			6 	6
Green GND		7 	7
Blue GND		8 	8
Sync GND		9 	10 + 11

23 November 2006, 10:47	#1
Smiley Amiga-less! Join Date: Feb 2005 Location: UK Posts: 1,350	HD15 to DB9 adapter? I want to plug my scandoubler into my spectrum gfx card using the input connector. However the input connector is a DB9 (female) on the spectrum and a HD15 (male) on the scandoubler. I already bought a M-F vga cable, is it possible to buy a male>male HD15>DB9 adapter? Thanks

23 November 2006, 14:09	#2
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	Heys smiley I think you might be after one of these http://www.phoenix-pcs.co.uk/acatalo...in-F2N163.html looking at that, i think you will need a jender changer for the db9 but there VERY cheap I am sure if you look about a bit you could find one cheaper than this http://cgi.ebay.co.uk/9-Pin-DB9-Seri...QQcmdZViewItem anyways smiley I hope it helps. Last edited by Zetr0; 23 November 2006 at 14:21.

23 November 2006, 17:57	#7
Smiley Amiga-less! Join Date: Feb 2005 Location: UK Posts: 1,350	Which is more expensive? I would probably prefer a Female 15pin > Male 9pin cable at about 20cm to 30cm (ill have to measure) Whats the price inc P&P for this? Attached images of both connectors: Attached Thumbnails Last edited by Smiley; 23 November 2006 at 18:24.

24 November 2006, 00:07	#9
Smiley Amiga-less! Join Date: Feb 2005 Location: UK Posts: 1,350	Would it be any cheaper to make an adapter? EDIT: Sorry but I have found a UK based website selling HD15 (F) to DB9 (M) adapters for £3.82 posted. I think I will just go with them as its the cheapest option. If the adapter doesnt work ill come back to you for a custom made cable. thanks Last edited by Smiley; 24 November 2006 at 00:13.

24 November 2006, 08:58	#11
Jope - Join Date: Jul 2003 Location: Helsinki / Finland Age: 43 Posts: 9,900	For the benefit of any future visitors who would want to build one themselves, it would go like this: Code: 9-Pin 15-Pin Red Video 1 1 Green Video 2 2 Blue Video 3 3 Horizontal Sync 4 13 Vertical Sync 5 14 Red GND 6 6 Green GND 7 7 Blue GND 8 8 Sync GND 9 10 + 11

23 November 2006, 14:45	#3
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,039	If you give me the pin-outs we can make one up for you.

23 November 2006, 15:23	#4
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	@Amigakit Thats awsome

23 November 2006, 16:33	#6
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,039	You can adapt between the 9-pin/15-pin with cable or adapter- you decide. We can do either.

23 November 2006, 23:12	#8
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,039	Cable will cost £6.99 P&P will be 99p Please provide pin-outs for the cable. Hope this is OK.

24 November 2006, 00:31	#10
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,039	Adapter would be about £1.50 cheaper. If you need anything, get in touch.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
db15 to db9 adapter... Playing Turrican with jump button :)	Mendel	Retrogaming General Discussion	5	15 August 2013 02:06
Gameport to db9 adapter	vulture	support.Hardware	7	15 July 2013 11:58
PSX adapter for DB9 computers	gibs	Amiga scene	32	13 June 2013 23:52
Any DB9 to USB adapter supporting analogue?	SunChild	support.Hardware	15	30 April 2013 11:12
USB to DB9 - cheap adapter?	lifeschool	support.Hardware	5	22 November 2012 22:47