ScummVM 2.1 for WarpOS - Page 5

Hedeon · 30 July 2020, 17:14

Old PPC accelerators might be a bit too slow for the newer ScummVM versions. Even in equal MHz (like 604e 400MHz) you see vast differences with the G3/G4 of the same or slightly higher (450/500) speerds.

That being said:

Is it in a certain scene or everywhere, the problem with the mouse cursor (which would be SDL)?

For the second issue I need play the game a bit. SDL actually uses a 68K interrupt for the IDCMP events, which sped up the response considerately on the 'new' PPC cards.

There is maybe also a 0.7, 1.5, 1.8 and 2.0 floating around. Please try those too (from newest to oldest).

Hedeon · 31 July 2020, 23:06

OK, played with 2.2 and there moving and hitting works (with the mouse). Both in FS and window. (with scaler hq2x).

You played in window? Maybe it lost focus when you went outside?

ancalimon · 17 August 2020, 15:20

Quote:

Originally Posted by Hedeon

OK, played with 2.2 and there moving and hitting works (with the mouse). Both in FS and window. (with scaler hq2x).

You played in window? Maybe it lost focus when you went outside?

There could be a problem with the input.device I use that came with RapidRoad usb. or the mouse driver that came with this Laser Amiga mouse (AEON brand)

Hedeon · 17 August 2020, 15:51

Could be it. Can you also test with a standard serial mouse/input.device?

grelbfarlk · 19 February 2021, 03:31

Finished playthrough of Monkey Island 3 and the Dig with Hedeon's 2.12 version with nary an issue.
Anyone have a suggestion of another good ScummVM game?

jurassicman · 19 February 2021, 08:20

Broken Sword 1 or Broken Sword 2

ForgottenHero · 19 February 2021, 08:22

Quote:

Originally Posted by grelbfarlk

Finished playthrough of Monkey Island 3 and the Dig with Hedeon's 2.12 version with nary an issue.

Where can I download the version?

grelbfarlk · 20 February 2021, 14:27

Quote:

Originally Posted by ForgottenHero

Where can I download the version?

It's on the EAB FTP under:
/TheZone/files/_2020/ScummVM212_WOS [ScummVM version 2.1.2 stable for WarpOS.].lha

Hedeon · 20 February 2021, 18:15

Try the 2.2 version. It's a monster... (It needs Frank Wile's ppc.library emu)

EDIT: And it has CAMD support.

grelbfarlk · 21 February 2021, 21:59

2.2 version is a MONSTER. Even though the .elf version is haram, it runs well, the fancy newer theme is actually snappy unlike the old versions.
Completed LSL5 which I've had on Mac floppy for about 25 years, but never finished it. Had a couple freezes but the sound continued, I think they were engine bugs.

Hedeon · 22 February 2021, 10:00

I finally got around to make a new startup.o for WOS so it can now directly start from ELF binaries. Still need a loader and ppclibemu provides that. It also removes the 20MB or so size limit on elf2exe2. So any engine can be put in there now.

Timtheloon · 13 March 2021, 22:30

Following:

Love ScummVM brings all the old favourites back, big fan of The Dig

kunglao · 18 October 2021, 18:29

The ELF Version is working great for me with the Voodo3 installed in Mediator and Sonnet.

Is there any way to force the output to the ZZ9000? When using it as a primary GFX Card under Workbench (Voodoo still installed for providing Memory access to Sonnet & Mediator) ScummVM is switching to Voodoo output when started and is 10x slower then it would be if Workbench is run at Voodoo directly.

Hedeon · 18 October 2021, 19:47

Quote:

Originally Posted by kunglao

The ELF Version is working great for me with the Voodo3 installed in Mediator and Sonnet.

Is there any way to force the output to the ZZ9000? When using it as a primary GFX Card under Workbench (Voodoo still installed for providing Memory access to Sonnet & Mediator) ScummVM is switching to Voodoo output when started and is 10x slower then it would be if Workbench is run at Voodoo directly.

No. The PPC cannot push data to the ZZ9000 as it is not sitting on the PCI bus as the Voodoo is.

kunglao · 18 October 2021, 20:54

thought so already, thanks for confirming.

Reynolds · 19 October 2021, 17:49

May I have the latest version please?

grelbfarlk · 06 March 2022, 06:25

Quote:

Originally Posted by Reynolds

May I have the latest version please?

Yes, the latest version is posted in this thread in the Zone.

drluking · 01 January 2023, 12:50

sorry, last version is this 'ScummVM220_WOSELF [ScummVM 2.2 Git for WarpOS (ppclibemu required)]' or other one?

and does it work well with cyberstormppc + cybervisionppc or is it better to use an older version?
THANK YOU and Happy New Year to all

Hedeon · 01 January 2023, 14:32

Yes, no, don't know, don't know, you too!

kunglao · 16 May 2023, 20:46

I'm pulling my hair out trying to find the root cause of a problem for quite a while now. After it initially worked fine, I can't seem to get the colors correct again. The entire program displays in false, green and blueish color palette. Any clue or hint for me where to look at? Checked all kinds of config within P96 but can't get it toward the right colors anymore. Strangely even the green large Icon is displayed in false colors on workbench. It's the only false color icon though. Almost feels like to curse of monkey island jumped into the settings and made my life difficult here

. Thankful for any thoughts, hints, ideas...

20 February 2021, 18:15	#89
Hedeon Semi-Retired Join Date: Mar 2012 Location: Leiden / The Netherlands Posts: 1,993	Try the 2.2 version. It's a monster... (It needs Frank Wile's ppc.library emu) EDIT: And it has CAMD support. Last edited by Hedeon; 20 February 2021 at 19:25.

21 February 2021, 21:59	#90
grelbfarlk Registered User Join Date: Dec 2015 Location: USA Posts: 2,902	2.2 version is a MONSTER. Even though the .elf version is haram, it runs well, the fancy newer theme is actually snappy unlike the old versions. Completed LSL5 which I've had on Mac floppy for about 25 years, but never finished it. Had a couple freezes but the sound continued, I think they were engine bugs. Last edited by grelbfarlk; 22 February 2021 at 04:44.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DosBox 0.74 and ScummVM 1.8.1 for Classic Amiga WarpOS	grelbfarlk	Coders. Releases	129	18 March 2024 18:29
GLHexen2 Warpos.	Cowcat	Coders. General	84	01 July 2021 22:29
ScummVM WarpOS PPC	drluking	support.Apps	6	29 September 2018 23:29
UAE for WarpOS 0.8.12	grelbfarlk	request.Apps	0	23 November 2016 01:14
WarpOS Programming Help?	esc	support.Other	8	21 October 2015 10:37

30 July 2020, 17:14	#81
Hedeon Semi-Retired Join Date: Mar 2012 Location: Leiden / The Netherlands Posts: 1,993	Old PPC accelerators might be a bit too slow for the newer ScummVM versions. Even in equal MHz (like 604e 400MHz) you see vast differences with the G3/G4 of the same or slightly higher (450/500) speerds. That being said: Is it in a certain scene or everywhere, the problem with the mouse cursor (which would be SDL)? For the second issue I need play the game a bit. SDL actually uses a 68K interrupt for the IDCMP events, which sped up the response considerately on the 'new' PPC cards. There is maybe also a 0.7, 1.5, 1.8 and 2.0 floating around. Please try those too (from newest to oldest).

31 July 2020, 23:06	#82
Hedeon Semi-Retired Join Date: Mar 2012 Location: Leiden / The Netherlands Posts: 1,993	OK, played with 2.2 and there moving and hitting works (with the mouse). Both in FS and window. (with scaler hq2x). You played in window? Maybe it lost focus when you went outside?

17 August 2020, 15:51	#84
Hedeon Semi-Retired Join Date: Mar 2012 Location: Leiden / The Netherlands Posts: 1,993	Could be it. Can you also test with a standard serial mouse/input.device?

19 February 2021, 03:31	#85
grelbfarlk Registered User Join Date: Dec 2015 Location: USA Posts: 2,902	Finished playthrough of Monkey Island 3 and the Dig with Hedeon's 2.12 version with nary an issue. Anyone have a suggestion of another good ScummVM game?

19 February 2021, 08:20	#86
jurassicman Registered User Join Date: Dec 2017 Location: Sassari/Italy Posts: 867	Broken Sword 1 or Broken Sword 2

22 February 2021, 10:00	#91
Hedeon Semi-Retired Join Date: Mar 2012 Location: Leiden / The Netherlands Posts: 1,993	I finally got around to make a new startup.o for WOS so it can now directly start from ELF binaries. Still need a loader and ppclibemu provides that. It also removes the 20MB or so size limit on elf2exe2. So any engine can be put in there now.

13 March 2021, 22:30	#92
Timtheloon Registered User Join Date: Dec 2017 Location: Portsmouth / United Kingdom Posts: 302	Following: Love ScummVM brings all the old favourites back, big fan of The Dig

18 October 2021, 18:29	#93
kunglao Registered User Join Date: Mar 2021 Location: Munich Posts: 14	The ELF Version is working great for me with the Voodo3 installed in Mediator and Sonnet. Is there any way to force the output to the ZZ9000? When using it as a primary GFX Card under Workbench (Voodoo still installed for providing Memory access to Sonnet & Mediator) ScummVM is switching to Voodoo output when started and is 10x slower then it would be if Workbench is run at Voodoo directly.

18 October 2021, 20:54	#95
kunglao Registered User Join Date: Mar 2021 Location: Munich Posts: 14	thought so already, thanks for confirming.

19 October 2021, 17:49	#96
Reynolds Alien Breeder Join Date: Dec 2007 Location: Szigetszentmiklos / Hungary Age: 46 Posts: 1,096	May I have the latest version please?

01 January 2023, 12:50	#98
drluking Registered User Join Date: Sep 2016 Location: Italy Posts: 225	sorry, last version is this 'ScummVM220_WOSELF [ScummVM 2.2 Git for WarpOS (ppclibemu required)]' or other one? and does it work well with cyberstormppc + cybervisionppc or is it better to use an older version? THANK YOU and Happy New Year to all

01 January 2023, 14:32	#99
Hedeon Semi-Retired Join Date: Mar 2012 Location: Leiden / The Netherlands Posts: 1,993	Yes, no, don't know, don't know, you too!

16 May 2023, 20:46	#100
kunglao Registered User Join Date: Mar 2021 Location: Munich Posts: 14	I'm pulling my hair out trying to find the root cause of a problem for quite a while now. After it initially worked fine, I can't seem to get the colors correct again. The entire program displays in false, green and blueish color palette. Any clue or hint for me where to look at? Checked all kinds of config within P96 but can't get it toward the right colors anymore. Strangely even the green large Icon is displayed in false colors on workbench. It's the only false color icon though. Almost feels like to curse of monkey island jumped into the settings and made my life difficult here . Thankful for any thoughts, hints, ideas...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)