Still having problems reassembling A1200

Techx · 12 May 2008, 05:07

Ok guys I'm back and still having problems, I would really very much appreciate some help here. I made a big mistake of not documenting or taking pictures of the disassembly process and am not sure how to reassemble everything *safely*.

This first photo shows the ribbon cable from my external dataflyer, I don't know which way the cable connects to the board.

This one shows the ribbon cable has a few wires split off of it with 2 4-pin power connectors, I connected them how i *think* they should be but I could really use another opinion.

Thanks all

Fingerlickin_B · 12 May 2008, 05:13

The wire with red trace on the HDD cable should be on the end of the onboard connector where you can see "1" printed.

What's going on in that other pic? Are you sourcing power for a 3.5" HDD from the LED array connector?

PZ.

12 May 2008, 05:07	#1
Techx Registered User Join Date: Aug 2005 Location: Middletown NJ, USA Age: 51 Posts: 71	Still having problems reassembling A1200 Ok guys I'm back and still having problems, I would really very much appreciate some help here. I made a big mistake of not documenting or taking pictures of the disassembly process and am not sure how to reassemble everything safely. This first photo shows the ribbon cable from my external dataflyer, I don't know which way the cable connects to the board. This one shows the ribbon cable has a few wires split off of it with 2 4-pin power connectors, I connected them how i think they should be but I could really use another opinion. Thanks all

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A1200 CF Problems	Mike UK	support.Hardware	6	15 September 2011 22:48
A1200 Problems	asm1	support.Hardware	3	13 February 2010 14:30
Disassembling and reassembling	absence	Coders. General	7	22 September 2009 15:30
Reassembling - FRONTIER	OSH	Coders. General	8	23 December 2005 07:59
A1200 HD problems	kuesco	support.Hardware	2	24 May 2005 17:45

12 May 2008, 05:13	#2
Fingerlickin_B Amiga Nut Join Date: Oct 2006 Location: Belco, Australia Posts: 2,242	The wire with red trace on the HDD cable should be on the end of the onboard connector where you can see "1" printed. What's going on in that other pic? Are you sourcing power for a 3.5" HDD from the LED array connector? PZ.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)