![]() |
![]() |
#1 |
Junior Member
|
Problem setting up 4000.
It's been so long sine I last setup an Amiga from scratch. I got my 4000 yesteday and all work well with the old hard drivers, but when I try to boot of the Install disks ro Workbench disks it doesn appear to recognize them as bootable because it simply does not boot with the disk. It goes straight to the hard drive. Even with no hard drives attached it does not boot off the floppy.
With the system put back together I'm in Workbench and the floppies come up as DF0:???? icons on the desktop. Don't recall exactly what this meant, but I think it's either unrecognized or unformatted. Can anyone point me to an installation guide cause I'm trying to do this from memory and I'm missing something somewhere. Thanks! |
![]() |
![]() |
#2 |
Posts: n/a
|
The answer is simple. Your install disks are screwed
![]() Since the disks wont boot, and they come up on Workbench on DF0:????, it is the only explanation |
![]() |
#3 |
Posts: n/a
|
Wait
I just realised, it could be your internal drive. It may be wrecked One of my A1200s does the same thing. Try inserting another disk into it (preferably one that you know works). If it boots, it's not your drive |
![]() |
#4 |
Junior Member
|
Since this is a Toaster system I plan on keep. I just ordered a Catweasel so that I have better compatability and speed with newer hard drives, CDs and standard PC floppies instead of just ordering replacement Amiga HD drives.
If it's my floppies that are trashed then I'm in bad shape, since I do not know of any AmigaOS software that boots from CD like MacOS, OS X, and Windows for installation. Then it would be a simple thing. |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,665
|
AmigaOS can boot from anywhere... You could build an autobootable CD in your PC I suppose!
Anyway there IS a possibility to boot your meega from CD, methinks... Try this first, get the disks from the net, transfer them to the meega and ... hold on, you have no system.. hmm ![]() If all fails I can hook you up with the disks you need through the good ole post. Lemme know ![]() |
![]() |
![]() |
#6 |
Posts: n/a
|
His system has a HD, since it boots to Workbench
So. I also suggest you download the disks from the net and transfer them. Then you'll be sure you have working versions |
![]() |
#7 |
Posts: n/a
|
Catweasel/Buddha
Just got my Catweasel and I have to say that it's actually worked the first time around with all the disks that were failing me before using a Mitsumi drive I had laying around.
The original problem was that I could not read the Workbench installation floppies. Kinda strange when I could format a drive and read a PC drive with CrossDOS. The difference is that these floppies are formatted as double density versus the ones that worked which were formatted as high-density. Now if anyone has an info on the Buddha IDE, like can it be setup to boot from the Buddha or simply as storage? |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mask setting problem (PFS3 & A2000/Derringer030+GVP2000HC+8) | amigoun | support.Other | 0 | 22 March 2012 11:19 |
Problem installing OS 4.0 onto a 4000 | dangermouse | support.Apps | 5 | 23 May 2010 22:54 |
Problem setting new keys in the Input section | Unregistered | support.WinUAE | 3 | 25 July 2004 07:21 |
Problem with Setting Up PC2Amiga | Steve | project.SPS (was CAPS) | 43 | 27 February 2004 23:08 |
Amiga 4000 Sound Problem | manicx | support.Hardware | 3 | 15 September 2003 22:43 |
|
|