24 June 2020, 18:55 | #1 |
Registered User
Join Date: Jul 2018
Location: Stockholm / Sweden
Posts: 194
|
A4000 PSU Voltages
Getting my A4000 back soon in a fixed and working condition.
So, I swapped the PSU out before with a 600W SFX Corsair PSU when I believed the original PSU might be to tired. Didn't change anything, hence the renovation. But now I decided to check the voltages from the original PSU to see if they're ok. The 5V lines were on the money, delivering about 5.05-ish, the same with -12V, almost spot on. The 12V line however only delivered 11.29V so my question is, is that enough or a sign that it's starting to get to old and tired? |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Old A500 PSU warning and question about exact voltages | Mathesar | support.Hardware | 3 | 13 May 2020 18:16 |
Are these A500 PSU voltages ok? | Starglider 2 | support.Hardware | 7 | 17 September 2018 22:58 |
ATX PSU gradually lowering voltages to my amiga when turned off!!! | R-Typer | support.Hardware | 6 | 29 November 2014 18:19 |
A1200 PSU no-load voltages? | bluescrn | support.Hardware | 13 | 19 October 2013 17:48 |
A4000D PSU voltages acceptable range | UberFreak | support.Hardware | 3 | 17 December 2009 11:24 |
|
|