Amiga 1200 A1200SDE+ 8MB Fastmem board and internal Gotek - Page 6

indigolemon · 17 February 2019, 23:33

Quote:

Originally Posted by patrik

It didn’t use to, but nowadays it does. I think they were added in the most recent 1.13 release.

So it does! Have grabbed the latest version, will give it a go and report back.

[edit] No luck with offline/online, games hang on WHDLoad start, then I guru'd on WHDLoad exit

solidcore · 17 February 2019, 23:53

indigolemon what you testing this with the SDE?

indigolemon · 18 February 2019, 00:36

Quote:

Originally Posted by solidcore

indigolemon what you testing this with the SDE?

No - not got the other 1200 back yet. This was just on my main 1200 with Roadshow. The interrupts will be generated by any network device, so it does kinda affect the SDE+ too.

solidcore · 18 February 2019, 04:09

Quote:

Originally Posted by indigolemon

No - not got the other 1200 back yet. This was just on my main 1200 with Roadshow. The interrupts will be generated by any network device, so it does kinda affect the SDE+ too.

Aww okay!

solidcore · 01 March 2019, 14:45

10x more boards have arrived.

I will take pre-orders from those interested, however I need to grab more bits, pm me for details

RetroPassionUK · 06 March 2019, 17:20

Hi!

I will take another one please...

Steve

Quote:

Originally Posted by solidcore

10x more boards have arrived.

I will take pre-orders from those interested, however I need to grab more bits, pm me for details

solidcore · 06 March 2019, 17:22

Waiting on parts atm . Unfortunately it’s been weeks and they’ve not shown up need to look at ordering more if they don’t

solarmon · 08 March 2019, 12:21

What happened to the Internal Gotek mother/baby solution? Is that still being developed or available somehwere?

solidcore · 08 March 2019, 13:13

if anyone wants their SDE's without missing out on the next batch, they should pre-order now. PM me for details.

solidcore · 08 March 2019, 13:14

Quote:

Originally Posted by solarmon

What happened to the Internal Gotek mother/baby solution? Is that still being developed or available somehwere?

not a particular interest of mine to make those in the UK. Sorry mate.

solarmon · 08 March 2019, 17:01

OK - maybe the Micro Gotek is the next best thing. Or the Amigotek.

solidcore · 04 April 2019, 09:56

Taking orders for sde again .

designer77 · 25 April 2019, 16:19

katarakt · 14 October 2019, 21:54

Found the thread here now because it wasn't linked in the other one.

Are there gerber available or blank PCBs ? Is this open source?

kulamario · 04 December 2019, 09:41

welcome
i have question about this gotek floppy
this gotek have separate power supply or u take from header pins?
can u share schematic for this gotek?

rcman · 23 March 2020, 00:44

I cannot get the ethernet working with Miami.

Please help

RC

indigolemon · 23 March 2020, 12:29

Hello, how far have you got? I have no direct experience of using Miami - but have mine working well with Roadshow so can try to help

rcman · 23 March 2020, 13:33

Quote:

Originally Posted by indigolemon

Hello, how far have you got? I have no direct experience of using Miami - but have mine working well with Roadshow so can try to help

I read that I may need to use roadshow. When I open MiamiInit to try and get it going it doesn't see the spinet.device.

I have installed Miami on my A2500 without issues but when I open MianiInit and select continue it normally shows all the cards.

I am not sure why it's not showing up. I even type the device name is and select continue but it does nothing.

When I power on the A1200 the network port on the switch lights up so I know it's working.

I know the driver inot have a GPL-compatible licence on it so I don't know if that's affecting it.

RC

indigolemon · 23 March 2020, 14:02

Starting with the basic questions, have you downloaded the SD/Network driver archive from https://www.mike-stirling.com/files/...s-7f2475aa.zip and put the spinet.device file in the correct place?

rcman · 23 March 2020, 14:03

Quote:

Originally Posted by indigolemon

Starting with the basic questions, have you downloaded the SD/Network driver archive from https://www.mike-stirling.com/files/...s-7f2475aa.zip and put the spinet.device file in the correct place?

Yes I have done that.

08 March 2019, 17:01	#111
solarmon Registered User Join Date: Dec 2018 Location: UK Posts: 1,715	OK - maybe the Micro Gotek is the next best thing. Or the Amigotek. Last edited by solarmon; 08 March 2019 at 17:25.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K1208 8mb Fastmem board for the A1200	kipper2k	Hardware mods	164	14 November 2019 22:47
Cannot decide which of my Amiga 500s to put the Gotek with Gotek extension board in?	turrican9	Retrogaming General Discussion	5	22 April 2016 10:39
amiga 1200 4 mb fastmem expansion	mikele	MarketPlace	0	28 November 2013 11:22
A2000 8mb fastmem with IDE install	kipper2k	Hardware mods	4	20 November 2013 21:10
Magnum Amiga 1200 8Mb RAM EXPANSION BOARD & CLOCK A1200	Sid	MarketPlace	5	12 October 2005 13:43

17 February 2019, 23:53	#102
solidcore Registered User Join Date: Sep 2017 Location: birmingham, uk Posts: 548	indigolemon what you testing this with the SDE?

01 March 2019, 14:45	#105
solidcore Registered User Join Date: Sep 2017 Location: birmingham, uk Posts: 548	10x more boards have arrived. I will take pre-orders from those interested, however I need to grab more bits, pm me for details

06 March 2019, 17:22	#107
solidcore Registered User Join Date: Sep 2017 Location: birmingham, uk Posts: 548	Waiting on parts atm . Unfortunately it’s been weeks and they’ve not shown up need to look at ordering more if they don’t

08 March 2019, 12:21	#108
solarmon Registered User Join Date: Dec 2018 Location: UK Posts: 1,715	What happened to the Internal Gotek mother/baby solution? Is that still being developed or available somehwere?

08 March 2019, 13:13	#109
solidcore Registered User Join Date: Sep 2017 Location: birmingham, uk Posts: 548	if anyone wants their SDE's without missing out on the next batch, they should pre-order now. PM me for details.

04 April 2019, 09:56	#112
solidcore Registered User Join Date: Sep 2017 Location: birmingham, uk Posts: 548	Taking orders for sde again .

25 April 2019, 16:19	#113
designer77 designer77 Join Date: Apr 2019 Location: Poland Posts: 32

14 October 2019, 21:54	#114
katarakt Registered User Join Date: Jul 2017 Location: Germany Posts: 205	Found the thread here now because it wasn't linked in the other one. Are there gerber available or blank PCBs ? Is this open source?

04 December 2019, 09:41	#115
kulamario Registered User Join Date: Dec 2018 Location: Greystones Posts: 60	welcome i have question about this gotek floppy this gotek have separate power supply or u take from header pins? can u share schematic for this gotek?

23 March 2020, 00:44	#116
rcman Long time Amiga Owner Join Date: Jun 2017 Location: Uxbridge Canada Age: 56 Posts: 182	I cannot get the ethernet working with Miami. Please help RC

23 March 2020, 12:29	#117
indigolemon Bit Copying Bard Join Date: Jan 2017 Location: Kelty, Fife, Scotland Age: 41 Posts: 1,293	Hello, how far have you got? I have no direct experience of using Miami - but have mine working well with Roadshow so can try to help

23 March 2020, 14:02	#119
indigolemon Bit Copying Bard Join Date: Jan 2017 Location: Kelty, Fife, Scotland Age: 41 Posts: 1,293	Starting with the basic questions, have you downloaded the SD/Network driver archive from https://www.mike-stirling.com/files/...s-7f2475aa.zip and put the spinet.device file in the correct place?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)