Ratte Switch + CBV64/3D + ScanPlus ECS

[Fabbry]

Hallo boys

I've got this hardware on A2000

• Cybervision 64/3D
• ScanPlus ECS Video Adapter

Im looking for a solution so no have two VGA cable and no swap source in LCD monitor.

Im thinking about Ratte Auto Switch monitor, but there are some problems about

1. Where to buy Ratte Hardware?
2. Are they compatibility?
3. If the are how flat cable use and where buy ?

Im looking for someone that already use this solution, or someone that suggest me another solution

Thx

Fabrizio

[cugar124]

I had a version of the setup using the ratte switch and cybervision 3d and indi on my a4000 it worked ok overall only stopped when my switch packed up. The software works well. Now im waiting on the zz9000 to arrive.

Sent from my LM-G710 using Tapatalk

[grelbfarlk]

1. I don't know where to buy them other than if someone makes a batch on Amibay
2. They are fine as far as compatibility, it takes a serial signal which you can mount with a socket on your CIA. I think there is also a Parallel port option?
3. Generally if someone is making a batch they offer cables with it.

I don't like the external cables generally, so I solder the cable to the pins on the back of the VGA card like Voodoo or Radeon. Then take an external 23pin RGB cable to a DB-9 to ribbon cable which connects to the Ratte switch, which is mounted next to it on a Zorro/PCI backplate.
I've never had it screw up like switch when it wasn't supposed to fail to switch when it was supposed to, it really a great gizmo.

[Fabbry]

Thx for yours answers. I'm looking for someone who make and sell the items. 1st I'll try to contact Ratte directly

Inviato dal mio PRA-LX1 utilizzando Tapatalk