WinUAE 3.2.0 beta series - Page 4

Zilog · 23 July 2015, 23:12

Quote:

Originally Posted by Toni Wilen

I think that is enough Windows 10 discussion, at least in this thread.

"meu controller"?

In new beta version of Winuae you move Rtg Card from Tab "Expansions" to new tab "Rtg board".
Do you think to add tab "Controller Scsi/Ide/Sasi"
tab "Acceleration Board"
tab "Pci Bridge"

Toni Wilen · 24 July 2015, 08:19

Quote:

Originally Posted by Zilog

In new beta version of Winuae you move Rtg Card from Tab "Expansions" to new tab "Rtg board".
Do you think to add tab "Controller Scsi/Ide/Sasi"
tab "Acceleration Board"
tab "Pci Bridge"

I don't really see any reason. They don't need any special config options (like RTG), mainly some jumper settings or ram size setting.

PCI: perhaps, to configure cards in same panel. Also not that important either.

thomas · 25 July 2015, 13:31

PCMCIA IDE controller cannot be selected in hardfile settings. It jumps to ADD-500:0/2 when you click ok.

Saved config from 3.1.0 still works.

27 July 2015, 16:02

If i reset WinUAE to default by deleting the registry key [HKEY_CURRENT_USER\Software\Arabuusimiehet] and start
WinUAE and save this configuration file as Standard.uae for example, the entrie gfx_linemode is always set to
gfx_linemode=double2 and not to gfx_linemode=double. Is this correct?
If i changed then under Settings / Host / Display the 'Line mode' from double to single and back to double
and save this again, WinUAE set it to gfx_linemode=double.

Toni Wilen · 27 July 2015, 16:32

Quote:

Originally Posted by MASH

gfx_linemode is always set to
gfx_linemode=double2 and not to gfx_linemode=double. Is this correct?

Yes. Default was changed in 3.1b17 (there is a reason why first post says previous official should be always tested first

)

Old interlace double mode was technically wrong, refresh rate should stay at 50Hz, not 25Hz, even if mode is interlaced. Old default used less CPU power but also made horizontal scrolling as ugly looking as possible.

27 July 2015, 16:37

Ahhh! Now I understand

Thx for clarifying

Toni Wilen · 27 July 2015, 18:28

http://www.winuae.net/files/b/winuae_3200b5.7z

Beta 5:

I think this version is now feature complete, at least big features are done. Fixes to do.

- Added OMTI-Adapter HD controller, same as ALF1 but different hardware base address.
- It was not possible to select HDF PCMCIA SRAM and IDE options.
- Flash ROM file and RTC battery backed up RAM file dialog didn't allow creation of new files.
- Made disk image dragndrop floppy drive hit box larger.
- ROM panel drag drop over ROM paths will work as expected. Previously it was always autodetected and "best" ROM path was selected. Now autodetection will be only used when dropped over empty space.
- Harddrives panel CD path dragndrop update.
- ProWizard written module files now include name of inserted disk in DF0: or CD image, like screenshot file names.

x86 bridgeboard updates:
- A2286 and A2386SX emulation implemented. CPU and FPU core, keyboard, interrupt controller and more from DOSBox. A2386SX BIOS is still misdetecting things.
- Floppy drive label is changed between DF2:<>A: and DF3:<>B: if configured as PC bridge drive. (Note that if you don't configure any PC drives, you will get really slow BIOS floppy detection)
- Added 40 track (5.25" 360k) and 80 track (all others) drive selection. This must match inserted image or BIOS drive detection will get confused.
- Always do full disk image size autodetection when disk is inserted in PC bridge drive. Without it most dos disks was detected as undersized adf images.
- A2286/A2386 CMOS RAM is stored to disk if ROM panel Flash RAM file path is set.
- DOSBox CPU core type selectable in bridgeboard config GUI, also 8088-based bridgeboards can be optinally configured to use DOSBox CPU core.

amigafreak68k · 27 July 2015, 19:52

Hi Toni,

I have this board. I can send you the board as a gift if you want to implement it!

http://amiga.resource.cx/exp/a2088xt

Toni Wilen · 27 July 2015, 20:14

Quote:

Originally Posted by amigafreak68k

Hi Toni,

I have this board. I can send you the board as a gift if you want to implement it!

http://amiga.resource.cx/exp/a2088xt

Thanks for the offer.

A2088 = A2088XT (IMHO "A2088XT" is incorrect name, at least official manual(s) only mention "A2088")

It still would help to improve compatibility, please contact me via PM or email.

mark_k · 27 July 2015, 21:30

amiga.resource.cx also has an entry for A2088T which is a significantly different board.

Toni Wilen · 27 July 2015, 21:37

Quote:

Originally Posted by mark_k

amiga.resource.cx also has an entry for A2088T which is a significantly different board.

It is supported already. A2088T manual would be nice to have, it seems to be completely MIA..

Differences I have noticed:
- BIOS has 720k 3.5" floppy support (A1060/A2088 apparently are 5.25" 360k only, unless some unknown newer BIOS includes 720k support)
- May have hardware floppy drive switcher (same as in A2386SX?)
- V20 CPU (80186 clone)
- Software CPU speed configuration (3 speeds)

UncleSpam · 28 July 2015, 05:39

For reference, some scanned Amiga manuals:

http://www.bombjack.org/commodore/am...iga-commodore/

Unfortunately no 2088T information, just for A2286/A2088.

Toni Wilen · 28 July 2015, 08:50

Quote:

Originally Posted by UncleSpam

For reference, some scanned Amiga manuals:

http://www.bombjack.org/commodore/am...iga-commodore/

Unfortunately no 2088T information, just for A2286/A2088.

Yeah, A1060/A2088/A2286 manuals are common. A2386SX and A2088T are missing.

midimax · 28 July 2015, 16:32

Quote:

Originally Posted by Toni Wilen

A2386SX and A2088T are missing.

A2386SX ?!
http://www.traumstation.ch/hardware/...d%20Manual.pdf

Toni Wilen · 28 July 2015, 21:02

Quote:

Originally Posted by midimax

A2386SX ?!
http://www.traumstation.ch/hardware/...d%20Manual.pdf

Thanks, confirms that jumpers are only for floppy config, thats what I wanted to know.

michaljarz · 31 July 2015, 01:31

Is the PPC processor state will no longer exist?

beta4:

beta5:

Arnie · 31 July 2015, 09:11

Yeah!, still there.

thomas · 31 July 2015, 11:02

Quote:

Originally Posted by Arnie

Yeah!, still there.

Erm... No.

How did you get it?

Toni Wilen · 31 July 2015, 11:15

It got broken, it is fixed in latest alpha versions only.

Arnie · 31 July 2015, 11:18

Ah, looks like I'm running the unofficial beta from the XT thread.

28 July 2015, 05:39	#72
UncleSpam Registered User Join Date: Jan 2007 Location: Burbank, CA Posts: 161	For reference, some scanned Amiga manuals: http://www.bombjack.org/commodore/am...iga-commodore/ Unfortunately no 2088T information, just for A2286/A2088. Last edited by UncleSpam; 28 July 2015 at 06:00.

31 July 2015, 09:11	#77
Arnie R.I.P Smudge 18-08-16 Join Date: Aug 2005 Location: Leicester/UK Age: 66 Posts: 3,968	Yeah!, still there. Last edited by Arnie; 12 October 2015 at 20:54.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WinUAE 3.1.0 beta series	Toni Wilen	support.WinUAE	305	06 June 2015 23:25
WinUAE 2.8.1 beta series	Toni Wilen	support.WinUAE	51	16 June 2014 18:05
WinUAE 2.4.0 beta series	Toni Wilen	support.WinUAE	342	29 March 2012 09:02
WinUAE 2.2.0 beta series	Toni Wilen	support.WinUAE	119	28 June 2010 02:35
WinUAE 1.6.0 beta series (was 1.5.4)	Toni Wilen	support.WinUAE	751	22 May 2009 07:24

25 July 2015, 13:31	#63
thomas Registered User Join Date: Jan 2002 Location: Germany Posts: 7,001	PCMCIA IDE controller cannot be selected in hardfile settings. It jumps to ADD-500:0/2 when you click ok. Saved config from 3.1.0 still works.

27 July 2015, 16:02	#64
MASH Posts: n/a	If i reset WinUAE to default by deleting the registry key [HKEY_CURRENT_USER\Software\Arabuusimiehet] and start WinUAE and save this configuration file as Standard.uae for example, the entrie gfx_linemode is always set to gfx_linemode=double2 and not to gfx_linemode=double. Is this correct? If i changed then under Settings / Host / Display the 'Line mode' from double to single and back to double and save this again, WinUAE set it to gfx_linemode=double.

27 July 2015, 16:37	#66
MASH Posts: n/a	Ahhh! Now I understand Thx for clarifying

27 July 2015, 18:28	#67
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,516	http://www.winuae.net/files/b/winuae_3200b5.7z Beta 5: I think this version is now feature complete, at least big features are done. Fixes to do. - Added OMTI-Adapter HD controller, same as ALF1 but different hardware base address. - It was not possible to select HDF PCMCIA SRAM and IDE options. - Flash ROM file and RTC battery backed up RAM file dialog didn't allow creation of new files. - Made disk image dragndrop floppy drive hit box larger. - ROM panel drag drop over ROM paths will work as expected. Previously it was always autodetected and "best" ROM path was selected. Now autodetection will be only used when dropped over empty space. - Harddrives panel CD path dragndrop update. - ProWizard written module files now include name of inserted disk in DF0: or CD image, like screenshot file names. x86 bridgeboard updates: - A2286 and A2386SX emulation implemented. CPU and FPU core, keyboard, interrupt controller and more from DOSBox. A2386SX BIOS is still misdetecting things. - Floppy drive label is changed between DF2:<>A: and DF3:<>B: if configured as PC bridge drive. (Note that if you don't configure any PC drives, you will get really slow BIOS floppy detection) - Added 40 track (5.25" 360k) and 80 track (all others) drive selection. This must match inserted image or BIOS drive detection will get confused. - Always do full disk image size autodetection when disk is inserted in PC bridge drive. Without it most dos disks was detected as undersized adf images. - A2286/A2386 CMOS RAM is stored to disk if ROM panel Flash RAM file path is set. - DOSBox CPU core type selectable in bridgeboard config GUI, also 8088-based bridgeboards can be optinally configured to use DOSBox CPU core.

27 July 2015, 19:52	#68
amigafreak68k Registered User Join Date: Apr 2013 Location: Engelsdorf / Germany Posts: 468	Hi Toni, I have this board. I can send you the board as a gift if you want to implement it! http://amiga.resource.cx/exp/a2088xt

27 July 2015, 21:30	#70
mark_k Registered User Join Date: Aug 2004 Location: Posts: 3,343	amiga.resource.cx also has an entry for A2088T which is a significantly different board.

31 July 2015, 01:31	#76
michaljarz Registered User Join Date: Jul 2014 Location: Katowice/Poland Posts: 51	Is the PPC processor state will no longer exist? beta4: beta5:

31 July 2015, 11:15	#79
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,516	It got broken, it is fixed in latest alpha versions only.

31 July 2015, 11:18	#80
Arnie R.I.P Smudge 18-08-16 Join Date: Aug 2005 Location: Leicester/UK Age: 66 Posts: 3,968	Ah, looks like I'm running the unofficial beta from the XT thread.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)