![]() |
![]() |
#1 |
Amiga-less!
Join Date: Feb 2005
Location: UK
Posts: 1,350
|
Can I use this for AGA/RTG switching?
![]() ![]() ![]() Will one of these work ok for RTG/AGA switching? It costs about £10 shipped from ebay. Ignore the keyboard mouse connectors. It switches the vga port using a button on top of it. Its £40 cheaper than the one from amigakit although a bit more messy. |
![]() |
![]() |
#2 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,900
|
Yes. It's a bit overkill since you won't be using the ps2 ports, but it'll work just fine.
|
![]() |
![]() |
#3 |
Amiga-less!
Join Date: Feb 2005
Location: UK
Posts: 1,350
|
Might buy one, paint it beige and attach it to my tower somehow so it doesnt look such a mess.
Seems to be the cheapest option so far. Will video be reduced quality due to it being a cheap product? |
![]() |
![]() |
#4 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,900
|
Probably the image quality will suffer somewhat. Use the best (thickest) VGA cables you have.
|
![]() |
![]() |
#5 |
Targ Explorer
|
http://cgi.ebay.co.uk/SVGA-VGA-Switc...QQcmdZViewItem
I use one of these. All works well and doesnt look too bad either.... |
![]() |
![]() |
#6 |
Amiga-less!
Join Date: Feb 2005
Location: UK
Posts: 1,350
|
How big and heavy is that switcher? ^
|
![]() |
![]() |
#7 |
Targ Explorer
|
my switcher about is 12cm deep 20cm long and 6cm high weighs about 300g approx.
|
![]() |
![]() |
#8 | |
Mostly Harmless
Join Date: Aug 2004
Location: Northern Ireland
Posts: 1,149
|
Quote:
|
|
![]() |
![]() |
#9 |
Mostly Harmless
Join Date: Aug 2004
Location: Northern Ireland
Posts: 1,149
|
Oooh nearly forgot: many KVMs are powered from the PS/2 ports and won't work unless connected to a computer's PS/2 output. It might be powered via the VGA leads or there might be an option for an external power supply. Check it out before buying.
|
![]() |
![]() |
#10 |
Angry Kid Fan
Join Date: Oct 2004
Location: London
Posts: 230
|
I have the same switcher as DDNI, but I use it to switch between Amiga and PC.
Unfortunately in my case I have found that there is ghosting on the PC side, when using that switcher. It is not severe, but it is noticeable. |
![]() |
![]() |
#11 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
WARNING!
I had the exact same switch , it does NOT sync to 50hz! so PAL screens DO NOT WORK! also it can be powered externally.... Last edited by keropi; 21 November 2006 at 08:11. |
![]() |
![]() |
#12 |
Amiga-less!
Join Date: Feb 2005
Location: UK
Posts: 1,350
|
The purple one or the one DDNI showed us?
|
![]() |
![]() |
#13 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
the purple ofcourse!
DDNI says his work OK... ![]() |
![]() |
![]() |
#14 | ||
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,900
|
Quote:
Quote:
It can be helped a little by shortening the wires or replacing the rgb + sync signals with shielded wires.. However it's quite tedious work and usually all the wires are the same colour inside, so you need to be careful. Last edited by Jope; 21 November 2006 at 10:11. |
||
![]() |
![]() |
#15 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
no, no OSD whatsoever... it has a 9V power input, needs it to work... and when displaying PAL screenmode, it just stays inactive or something... I got it for aga/rtg switching too, around a yeat ago, and did not work
![]() |
![]() |
![]() |
#16 |
Amiga-less!
Join Date: Feb 2005
Location: UK
Posts: 1,350
|
I use a spectrum 28/24 using pic96
It says it has automatic monitor switching according to amiga hardware cx. Is this true and could I get it to auto-switch between it and the scandoubler? |
![]() |
![]() |
#17 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
if it has 2 vga ports on the back then YES.
just feed the scandoubler output to the card's input... |
![]() |
![]() |
#18 |
Amiga-less!
Join Date: Feb 2005
Location: UK
Posts: 1,350
|
Oh right. Yes it does have an inout and output on it.
So I just have a vga cable going from my SD to input Then a vga cable form output to monitor ![]() So no need for a KVM then? ![]() Last edited by Smiley; 21 November 2006 at 13:14. |
![]() |
![]() |
#19 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
that's right, no KVM needed.
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
AmiQuake new 68k Quake Port for AGA/RTG | NovaCoder | News | 465 | 27 May 2024 10:12 |
Gfx artifacts with native AGA but not with RTG | Geijer | support.Other | 5 | 09 August 2011 07:45 |
DPAINT 4 AGA working great on RTG !! | laser | Amiga scene | 0 | 23 December 2008 22:42 |
The Vague #1 AGA-RTG edition is released ! | kas1e | Amiga scene | 12 | 30 October 2007 00:27 |
AGA/RTG switch on amigakit.com | keropi | Hardware pics | 44 | 16 November 2006 00:10 |
|
|