![]() |
![]() |
#1 |
Posts: n/a
|
Incredibly slow disk access under WinUAE 2.0.1
I just upgraded to the newest version from 1.61 and under my main Workbench config I'm getting incredibly slow disk accesses. However, if I lower the cpu idle slider 1 notch everything goes back to normal. By slow I'm referring to it taking several seconds to open the Prefs drawer versus nearly instantaneous before.
My system is an Athlon 64 3200 with 1gb of ram running XP SP3. I'm attaching the config file I'm using. Ok, a little more info. I've discovered that when the WinUAE window doesn't have focus(and therefore the priority drops) the speed improves dramatically. For example, DiskSpeed goes from 11 file creates to thousands. Last edited by Shnoober; 24 December 2009 at 12:07. Reason: added more info |
![]() |
#2 |
Banned
|
in Display tab / Settings / Native mode, I noticed vSync is activated when I loaded your config. Try choosing another (non vSync'ing) mode.
Also, just to make sure, I would leave refresh rate to default, and may be untick NTSC in chipset (even though you live in a NTSC country). |
![]() |
![]() |
#3 |
Banned
|
i think its a bogus bug . isnt it ?
|
![]() |
![]() |
#4 | |
CaptainM68K-SPS France
|
Quote:
|
|
![]() |
![]() |
#5 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,575
|
You mean "below normal" = no slowdown but "normal" = slow?
|
![]() |
![]() |
#6 | |||
Posts: n/a
|
Quote:
Quote:
Quote:
I just tested with 1.6.1 and the second thread starts getting some cpu time right from the start. |
|||
![]() |
#7 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,575
|
Logs please (both logs, don't forget logging checkbox in misc panel). Also test with below normal.
|
![]() |
![]() |
#8 |
CaptainM68K-SPS France
|
I don't understand then because i have no slow problem here.
There has been many enhancements and bugs removed by toni in this version 2.0.1. What kind of configuration are you using ? |
![]() |
![]() |
#9 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,575
|
This has been reported long time ago but lowering priority has always "fixed" it.
Problem has never been found, one possible suspect is real time virus scanner. |
![]() |
![]() |
#10 |
Posts: n/a
|
I did a quick test. Below normal still showed slow speeds but low worked correctly.
|
![]() |
#11 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,575
|
Do you have any virus/spyware/etc with real time scanning enabled? Does filesystem access still run slowly if it is temporarily disabled?
|
![]() |
![]() |
#12 |
Posts: n/a
|
No virus/spyware or any other kind of scanning. Have other single core users reported problems or am I alone?
|
![]() |
#13 |
Banned
|
Can you try "unpacking" the HDF ? I mean trying with a Workbench barely located in a directory of your HDD. Also, did you install the latest VIA chipset drivers ?
Seems like a tricky issue. |
![]() |
![]() |
#14 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,575
|
Try http://www.winuae.net/files/b/winuae.zip (using normal priority first)
|
![]() |
![]() |
#15 |
Banned
|
Toni its a real bug ?
|
![]() |
![]() |
#16 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,575
|
|
![]() |
![]() |
#17 |
Banned
|
Oh thanks
![]() |
![]() |
![]() |
#18 |
Posts: n/a
|
Sorry, it's still not working right. I'm starting to wonder if it's not my system which is why I asked if other single core users had reported the same problem. I've noticed that my cpu isn't hitting 100% all the time even though WinUAE says it is and to me that sounds like a problem on my end. In fact it seems to be dipping a few percent whenever disk access is supposed to be happening. This motherboard is a real POS. I would test on my other system but it's currently hard drive-less.
|
![]() |
#19 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,575
|
It could be powersaving problem but afaik it was common problem only with XP and AMD dualcores. Have you tried this: http://support.microsoft.com/kb/895980
Also, to 100% confirm it isn't priority issue, download Sysinternals Process Explorer, select winuae.exe process, open Threads tab. First item in Threads tab should always have lower Base Priority than other winuae.exe threads (1 unit lower if using 1.6 or 2.0, 2 units lower if above beta) |
![]() |
![]() |
#20 |
Posts: n/a
|
I set all the WinUAE priorities to normal so I could switch back and forth with PE without it changing priorities. With 2.0.1 the top thread has a base priority of 8 and the other threads have a priority of 9. With the beta the top thread has a priority of 8 and the other threads have a priority of 10.
Even though the pmtimer switch is only supposed to affect dual cores I'm going to try it anyway to see if it has any effect. Update: I just tried the /usepmtimer switch and no change. Last edited by Shnoober; 27 December 2009 at 04:02. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
winuae cdda access time too slow vs cd32 | turrican3 | support.WinUAE | 9 | 17 November 2012 04:39 |
WinUAE 2.x.x incredibly slow video-capture issue | hexaae | support.WinUAE | 40 | 26 December 2009 15:24 |
disk access in Elite 1 Help | riedquat | support.WinFellow | 6 | 04 July 2005 20:19 |
Newbie question: how to access files on an Amiga disk using PC disk drive? | Nethead | New to Emulation or Amiga scene | 5 | 04 July 2003 23:07 |
Slow speed Direct HD access | Dan Andrea | support.WinUAE | 3 | 27 December 2002 14:21 |
|
|