|
27 April 2006, 11:24
|
#1 |
|
Registered User
Join Date: Apr 2006
Location: Basingstoke
Age: 44
Posts: 11
|
Intermittant RF Output on A1200
I have had the lid off my A1200 to upgrade the Kickstart ROMs, and have noticed that the output to the TV via RF is a bit intermittant.
Sometimes it is outputting to channel 32, sometimes to 36. It is also sometimes dark, or bright and normal. I had not used the Amiga for a long time, and noticed this before I upgraded the ROMs too. If I move the amiga around, it can change the result. Can anyone speculate on what might be the problem - a loose chip or cable that might just need re-seating, or anything else I can check for? cheers bob808 |
|
|
27 April 2006, 19:09
|
#2 |
|
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,911
|
Cold solder joints inside the RF modulator?
Anyway, ditch that and get an RGB Scart .. :-) |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem with A1200 composite output | damiraga | support.Hardware | 13 | 31 October 2011 20:44 |
| No composite video output on A1200 | Jonathan Drain | support.Hardware | 7 | 16 October 2011 04:34 |
| Unstable 60hz output from my A1200(T) - Very Stange! | woody.cool | support.Hardware | 5 | 17 April 2010 07:34 |
| Intermittant CS PPC | DarrenHD | support.Hardware | 8 | 13 January 2010 11:40 |
| A1200 Video Output problem | EmuChicken | support.Hardware | 17 | 19 September 2006 14:33 |
|
|
