04 July 2015, 00:08 | #1 |
Registered User
Join Date: Jun 2014
Location: Groton / USA
Posts: 37
|
Network Setup issue ( RESOLVED )
I cannot seem to get networking playing. Driving me nuts.
Winuae 3.1.0 A1200/WB3.9 winpcap ( latest version as of a week ago) 2 nics. both wired. Genesis Win 7 AV both installed and uninstalled DHCP server set to handle both dhcp and bootp I've tried both uaenet.device and a2065. even disabled 1 nic ( the windows side one). With logging set I've seen the correct NIC being used. Tried static and dhcp/bootp. Just cannot get it playing. wpcap.dll 4.1.0.2980 uaenet: WinPcap version 4.1.3 (packet.dll version 4.1.0.2980), based on libpcap version 1.0 branch 1_0_rel0b (20091008) uaenet: detecting interfaces rpcap://\Device\NPF_{878B652F-90E6-4542-AB8B-7C7275C767B4} - Network adapter 'Intel(R) 82567LM-3 Gigabit Network Connection' on local host - MAC 00:24:E8:34:2A:98 (0) uaenet: end of detection Is there a definitive setup by step for setting up windows nic settings, winpcap, Winuae settings, and then Genesis that I can check myself with? Last edited by Greyspirit; 19 July 2015 at 04:38. Reason: Resolved |
04 July 2015, 08:34 | #2 |
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 7,026
|
Well, you say nothing about your actual problem. From "Just cannot get it playing" it is impossible to say what you could have done wrong.
Genesis comes with a wizard. It should be able to setup the network. Just enter the required information (like uaenet.device). Try static IP addresses. |
04 July 2015, 09:48 | #3 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,570
|
winpcap can have compatibility issues (unless you have guaranteed other winpcap Windows software work)
Try with slirp mode first to confirm working Amiga side. (use DHCP, if no DHCP, must use these settings: IP 10.0.2.15, Gateway 10.0.2.2, DNS 10.0.2.3, Mask 255.255.255.0) |
04 July 2015, 18:30 | #4 |
Registered User
Join Date: Jun 2014
Location: Groton / USA
Posts: 37
|
Thanks. I'll try that this afternoon.
|
18 July 2015, 05:50 | #5 |
Registered User
Join Date: Jun 2014
Location: Groton / USA
Posts: 37
|
Well, slirp didn't work. Did get inbound tcp working when I setup Windows card with static ip and then used bsdsocket. Couldn't get outbound telnet to work via telnetd.device though.
Did some more troubleshooting. Finally realized that winpcap was binding to teredo tunneling pseudo interface for some strange reason. Few tweaks and a couple of reboots and got it binding to correct interface. Was finally able to get uaenet.device to work with Genesis both "online" and "offline" Now I can't seem to get telnetd to work in this configuration in CNet. When the port tries to load, I get the error "couldn't bind name to initial socket (48)" which I can't find what exactly it means :/ |
19 July 2015, 04:37 | #6 |
Registered User
Join Date: Jun 2014
Location: Groton / USA
Posts: 37
|
RESOLVED
Tested everything I could. Nothing appeared to be misconfigured on windows side. On a hunch I upgraded from 3.1 to 3.2 Beta 3. Issue disappeared. a2065 now working. Haven't tried uaenet.device yet but expecting it to work also. only other issue was getting "Couldn't bind name to initial socket (48)" when CNet tried to startup using telnetd. Had to disable telnet in inetd.conf that was put in when bsdsocket was used previously. So to put it out there...final configuration is win7 x64 host Winpcap 4 dual NICs ( 1 embedded and 1 usb nic. The embedded being used for WinUAE) NIC has all protocols and windows components disabled including ipv4 WinUAE 3.2 beta 3. A2065 enabled. bsdsocket and uaenet.device disabled. Emulated A1200 w/WB3.9 with Genesis installed Genesis setup with A2065 device 0. Looks like I went with static IP. CNET BBS 3.05 with telnetd.device inetd.conf in amitcp:db folder has telnet line commented out with leading # launch WinUAE with -a2065_promiscuous switch ( VERY IMPORTANT!!!) Last edited by Greyspirit; 01 August 2015 at 14:48. Reason: forgot promiscuous mode |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best network setup? | Dreedo | Amiga scene | 3 | 11 October 2011 19:11 |
amiga computing vol 2 issue 1 (issue 13 anyone) | Mort | request.Other | 0 | 30 November 2010 11:27 |
Networking A1200 How To Setup Network With SMB Connect | crazyegg | support.Apps | 14 | 26 November 2008 03:08 |
Issue with my Setup? | Binary Stylus | project.WHDLoad | 9 | 26 August 2008 15:19 |
PCMCIA network setup problems | Bane | support.Hardware | 29 | 11 February 2008 15:58 |
|
|