CS MK2 060 + SCSI for a CS MK3 060

Jope · 25 January 2007, 22:25

Hi,

I'd like to trade my CyberStorm MK2 060/50 with SCSI-2 module + terminator board for a CS MK3 060/50.

You tell me how much money I should put in addition to the MK2.

The reason for this is that my A3000T's case will not fit the MK2 + SCSI module and I don't have a DMAC-04, so the internal SCSI jams very often, making the machine pretty much unusable.

Please email me at vjouppi@sci.fi

alexh · 25 January 2007, 23:35

I never had a DMAC -04 and my SCSI never locked regularly AND I had the WD PROTO chip.

Upgrading to the -08 WD SCSI chip will help.

CU_AMiGA · 26 January 2007, 02:14

I heard that CSMK3 are pretty rare. I have one! Good cards they are too!!!

alexh · 26 January 2007, 10:09

They have a habit of breaking. The 060 socket is VERY VERY fragile. Never remove the 060 if you dont have to. Never carry the card by the 060/heatsink etc.

CU_AMiGA · 26 January 2007, 12:38

Yo!

Never had a problem with mine (in the 2 weeks i have owned it!). Mine has a heatsink and fan. But yeah i have heard the socket is fragile, so i wont touch it. Anyway i have sent that and the Amiga 4000 to that repair centre in France. My A4000 to be fixed and the CSMK3 just for a routing check.

alexh · 26 January 2007, 16:08

You wus, you did that JUST to get the hard drive LED fixed!

CU_AMiGA · 26 January 2007, 16:12

Well yeah. The guy in France said he could fix the A4000 HD LED plus give the CSMK3 a quick check to see if it is in perfect working order. You didn't think el presto here could fix it do you?!

Apparently the guy said the HD LED prob on the A4000 could also trigger off other problems or something!!!

alexh · 26 January 2007, 18:36

If you find out exactly what was wrong then I would like to know.

CU_AMiGA · 26 January 2007, 18:45

Yeah ok. I sent the package out yesterday with parcel force. How long do you think it'll take to get there?

Regards

Zetr0 · 26 January 2007, 18:51

should only take a few days.... its a bit snowy there at the moment so postage might get a day delay or two...

I just sent some items to JJ last week took about three days and then it was a two day turn-round for repair!

all went well and they should return by next week

CU_AMiGA · 26 January 2007, 19:58

Excellent. I have a Picasso IV on its way from Italy. Can't wait to try that out.

Regards

Jope · 28 January 2007, 08:51

Quote:

Originally Posted by alexh

Upgrading to the -08 WD SCSI chip will help.

I guess I'll try that as starters.. I hear that the DMACs vary a tiny bit anyway, so some -02 parts will work fine with cpu boards.

alexh · 28 January 2007, 10:05

Soft-hut say they sell rev -04 DMACs.

They could do you a package of

Code:

DMAC    Rev -04 $70
Ramsey  Rev -07 $30
WD SCSI Rev -08 $25
Buster  Rev -11 $30
-------------------------
Total          $155 (£78)

A little expensive but if you are a purist

Or you can get just the WD SCSI rev 8 part from vesalia for just £13 and see how it goes

Jope · 01 February 2007, 17:09

Heh, we'll see whether they REALLY have those DMACs.. I I'll try and contact them. :-)

I already popped in a buster 11 sometime last year.

Doc Mindie · 02 February 2007, 11:18

Uhm... just out of interest and such.........

I've got a couple cards I'd like to get "fixed" but the local vet says they're allright as they are..... any chance of pointing me in the direction of that French fry... I mean, french guy?

AMIGAZ · 02 February 2007, 11:24

Quote:

Originally Posted by Doc Mindie

Uhm... just out of interest and such.........

I've got a couple cards I'd like to get "fixed" but the local vet says they're allright as they are..... any chance of pointing me in the direction of that French fry... I mean, french guy?

Jean Jacques Boulet at www.amigacenter.com

alexh · 02 February 2007, 13:27

Depending on what it is and what is wrong I can do a few things here in the UK. I recently fixed CU_Amiga's Flicker Magic, same day return

CU_AMiGA · 02 February 2007, 13:44

oh still hasn't arrived at Amiga Center!

alexh · 02 February 2007, 14:25

You know what I am thinking?

CU_AMiGA · 02 February 2007, 18:32

no???

25 January 2007, 22:25	#1
Jope - Join Date: Jul 2003 Location: Helsinki / Finland Age: 43 Posts: 9,915	CS MK2 060 + SCSI for a CS MK3 060 Hi, I'd like to trade my CyberStorm MK2 060/50 with SCSI-2 module + terminator board for a CS MK3 060/50. You tell me how much money I should put in addition to the MK2. The reason for this is that my A3000T's case will not fit the MK2 + SCSI module and I don't have a DMAC-04, so the internal SCSI jams very often, making the machine pretty much unusable. Please email me at vjouppi@sci.fi

28 January 2007, 10:05	#13
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,466	Soft-hut say they sell rev -04 DMACs. They could do you a package of Code: DMAC Rev -04 $70 Ramsey Rev -07 $30 WD SCSI Rev -08 $25 Buster Rev -11 $30 ------------------------- Total $155 (£78) A little expensive but if you are a purist Or you can get just the WD SCSI rev 8 part from vesalia for just £13 and see how it goes

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
For Sale: Cyberstorm Mk2 060 + 128MB RAM + SCSI II Module + 18GB SCSI Drive	Zetr0	MarketPlace	9	27 June 2012 22:41
For Sale: CS-MKII 060-60mhz , CS-MK2 scsi addon	keropi	MarketPlace	6	26 May 2007 23:00
A4000D + Cybervision64 + MK2/060-60mhz = garbagge on cursor!	keropi	support.Hardware	17	14 December 2006 23:10
Swap: My BPPC 240/060 + SCSI For A BPPC 240/060 + Money or Blizzardvision	CU_AMiGA	MarketPlace	8	11 September 2006 06:47
Cyberstorm MK2 060 for sale, shipping to any place in the world !!	Effy	MarketPlace	8	14 May 2005 11:09

25 January 2007, 23:35	#2
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,466	I never had a DMAC -04 and my SCSI never locked regularly AND I had the WD PROTO chip. Upgrading to the -08 WD SCSI chip will help.

26 January 2007, 02:14	#3
CU_AMiGA Banned Join Date: Dec 2003 Location: Exeter Age: 39 Posts: 970	I heard that CSMK3 are pretty rare. I have one! Good cards they are too!!!

26 January 2007, 10:09	#4
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,466	They have a habit of breaking. The 060 socket is VERY VERY fragile. Never remove the 060 if you dont have to. Never carry the card by the 060/heatsink etc.

26 January 2007, 12:38	#5
CU_AMiGA Banned Join Date: Dec 2003 Location: Exeter Age: 39 Posts: 970	Yo! Never had a problem with mine (in the 2 weeks i have owned it!). Mine has a heatsink and fan. But yeah i have heard the socket is fragile, so i wont touch it. Anyway i have sent that and the Amiga 4000 to that repair centre in France. My A4000 to be fixed and the CSMK3 just for a routing check.

26 January 2007, 16:08	#6
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,466	You wus, you did that JUST to get the hard drive LED fixed!

26 January 2007, 16:12	#7
CU_AMiGA Banned Join Date: Dec 2003 Location: Exeter Age: 39 Posts: 970	Well yeah. The guy in France said he could fix the A4000 HD LED plus give the CSMK3 a quick check to see if it is in perfect working order. You didn't think el presto here could fix it do you?! Apparently the guy said the HD LED prob on the A4000 could also trigger off other problems or something!!!

26 January 2007, 18:36	#8
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,466	If you find out exactly what was wrong then I would like to know.

26 January 2007, 18:45	#9
CU_AMiGA Banned Join Date: Dec 2003 Location: Exeter Age: 39 Posts: 970	Yeah ok. I sent the package out yesterday with parcel force. How long do you think it'll take to get there? Regards

26 January 2007, 18:51	#10
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	should only take a few days.... its a bit snowy there at the moment so postage might get a day delay or two... I just sent some items to JJ last week took about three days and then it was a two day turn-round for repair! all went well and they should return by next week

26 January 2007, 19:58	#11
CU_AMiGA Banned Join Date: Dec 2003 Location: Exeter Age: 39 Posts: 970	Excellent. I have a Picasso IV on its way from Italy. Can't wait to try that out. Regards

01 February 2007, 17:09	#14
Jope - Join Date: Jul 2003 Location: Helsinki / Finland Age: 43 Posts: 9,915	Heh, we'll see whether they REALLY have those DMACs.. I I'll try and contact them. :-) I already popped in a buster 11 sometime last year.

02 February 2007, 11:18	#15
Doc Mindie In deep Trouble Join Date: Sep 2004 Location: Manchester, Made in Norway Age: 51 Posts: 841	Uhm... just out of interest and such......... I've got a couple cards I'd like to get "fixed" but the local vet says they're allright as they are..... any chance of pointing me in the direction of that French fry... I mean, french guy?

02 February 2007, 13:27	#17
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,466	Depending on what it is and what is wrong I can do a few things here in the UK. I recently fixed CU_Amiga's Flicker Magic, same day return

02 February 2007, 13:44	#18
CU_AMiGA Banned Join Date: Dec 2003 Location: Exeter Age: 39 Posts: 970	oh still hasn't arrived at Amiga Center!

02 February 2007, 14:25	#19
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,466	You know what I am thinking?

02 February 2007, 18:32	#20
CU_AMiGA Banned Join Date: Dec 2003 Location: Exeter Age: 39 Posts: 970	no???

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)