![]() |
![]() |
#1 |
Tubby mechanical friend
|
Harddrive trouble
So I was refurbishing my A1200 over last few days and got everything running today, except for Warp3D, but I don't really need it anyway. So I switched the Amiga on about two hours ago, and it didn't boot anymore. The harddisk LED was blinking a little, then all disk activity stopped at a black screen. I rebooted without startup-sequence, this worked so far. At first I thought something in the startup-sequence was causing the problems, but when I edited it a little to try to find out where the problem was, I was unable to save the file ... ed didn't quit and the HD LED was constantly lit. I reset the machine again in "safe mode". I tried DIR on several directories, which worked fine. But trying to run anything but setpatch or ed didn't seem to work - I got a "Volume Workbench is not validated" at one time.
Ok, so I thought I could finally use that 3.5" 20GB harddisk that I still had lying around. I disconnected the old (2.5" 3GB) harddisk and booted Workbench 3.0 from floppy in DF1: (DF0: doesn't work anymore either, no idea where the problem lies here :/). Of course, the hdtoolbox doesn't know what to do with such a large harddisk, but it was able to partition it with 163MB. The next step I did after copying WB files to the HD was to get the CD-ROM driver working to install OS3.9. My plan was to run the 3.9 hdtoolbox to try and reformat the harddisk to able to use all of the 20GB. After a successfull installation, I got this problem though: after booting, I get the message "Amidock Program failed (Error #8000003D)". Same thing with the HDtoolbox itself, it gives me the very same error message. At first I thought it might be the missing 060 libs, but after copying them over, I still get the same problem. Booting with no s-s doesn't help either, because then hdtoolbox complains about a missing resource.library. I'm getting really annoyed by this, it took me several hours to set up the non-working A1200 at first, and now this >( I hope anyone here can help me with this ... here are the full specs just in case: A1200 Blizzard 1260/50Mhz/64MB RAM Kick 3.1/OS3.9 4-way IDE adapter w/ TEAC CD writer Mediator PCI w/ Voodoo3 & 100MBit Ethernet |
![]() |
![]() |
#2 | ||
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 7,047
|
Quote:
Quote:
However, you must not access (format etc.) any partition which is fully or partially above the 4GB border of the drive. |
||
![]() |
![]() |
#3 | ||
Tubby mechanical friend
|
Quote:
Quote:
|
||
![]() |
![]() |
#4 | |||
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 7,047
|
Quote:
Quote:
If you don't find the real number of cylinders, get the total number of blocks and calculate the cylinders: heads * sectors * cylinders = total number of blocks Quote:
|
|||
![]() |
![]() |
#5 | ||
Tubby mechanical friend
|
Quote:
Model Cylinders Heads Sectors Capacity (*) Sectors (**) Capacity (**) MPF3204AT 16,383 16 63 8.45 GB 40,031,712 20.4 GB How do I get the required information out of that? I'm not really into hardware ^^ Quote:
|
||
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 7,047
|
This is the total number of blocks: 40,031,712
This means your values are 16 heads, 63 sectors and 39,714 cylinders. The 3.9 version of HDToolbox would use 8 heads, 252 sectors and 19,857 cylinders. Perhaps you cannot use more than 32k cylinders, so try these values. The capacity of the drive is 20,496,236,544 bytes which equals 19.09 GB. Alternatively you can also use HDInstTool: http://www.aminet.net/search.php?query=hdinsttool |
![]() |
![]() |
#7 |
Registered User
|
This probably won't help you much but one way to track down startup-sequence problems is to boot with no startup then enter the following two commands:
set echo on execute s:startup-sequence Now you will see every program that's started printed in your shell window so it's easy to find where the problem is. |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Floppies, CD or Harddrive? | Zeewolf | New to Emulation or Amiga scene | 2 | 18 July 2007 13:34 |
Amiga Harddrive > PC | DeAdLy_cOoKiE | support.Hardware | 4 | 29 June 2005 16:53 |
adf to harddrive | vertigo | New to Emulation or Amiga scene | 10 | 26 July 2004 09:35 |
PC harddrive help!!!! | Amiga1992 | Retrogaming General Discussion | 14 | 05 August 2002 19:43 |
harddrive problems.. | poppe | support.Hardware | 12 | 09 December 2001 21:25 |
|
|