A4000 DIY Motherboard - Page 8

mpattonm · 09 April 2018, 13:36

Not very tidy indeed, but that is not the point. I would like to say its a great progress!

elenachen · 24 May 2018, 21:34

Sry, was very busy in the last few months. Second child was born 2 1/2 weeks ago. Now tidying up my workspace, hope I'll get some time to continue afterwards.

Valken · 25 May 2018, 08:27

Congrats with the new baby! I understand with little gremlins running around.

Looking forward to your project.

Personally, I would ask for the cpu + fastram, to be on a daughter card for easier upgrades and to make it mini ITX format with only USB, HDMI, DisplayPorts and modern IO. Everything else can be plugged in with adapters while keeping the AGA + chipmem chips on board for compatibility.

A Mini Amiga with real HW like the AmiITX would be awesome due to space and "relative" affordability.

If you need someone to help fab the boards or any custom ASICs, let me know. I have a guy who helps me IC / ASIC development / production in China but MOQs are mainly the limiting factors.

elenachen · 26 May 2018, 08:35

Thx and nope, there will be an eATX Version first. The Zorro slots need a lot of length.

elenachen · 29 August 2018, 08:40

Hmm, had to repair my motorcycles first, because they had to leave the yard....well, now i won't get killed by my landlord.

So, down to business. Another schematic page finished. Will still take a while for the rest though.

I hope you all had a more stress free time than I did

hese · 16 September 2018, 13:59

Would it help you if I convert my A4000+ project to KiCad so you can get the schematics from it (as template) and you could start working on the actual board quicker?

elenachen · 10 February 2019, 17:04

Finally doing the PCB Layout - Will still take a while, but making progress :-)

Pyromania · 10 February 2019, 19:18

Quote:

Originally Posted by elenachen

Finally doing the PCB Layout - Will still take a while, but making progress :-)

That’s awesome news, glad to hear it.

elenachen · 11 February 2019, 18:37

Thx

Placement will take a while.....but making good progress so far

elenachen · 13 February 2019, 16:09

Most of the bigger components are placed. Places are not fixed yet, but I think most of them will stay where they are. I hope this will go well. I'm kind of nervous that it'll not work in the end

AJCopland · 14 February 2019, 14:10

Really nice work elenachen!

Marlon_ · 14 February 2019, 14:22

Neat! Good luck! =)

elenachen · 14 February 2019, 15:11

Thx, I hope I'll get it to run in the end.

shaf · 14 February 2019, 18:15

since Prometheus documentation is available is it technically possible to replace the ISA Slots with PCI Slots, if not now maybe in a later revision. Although I will still buy the board in it MATX state.

elenachen · 14 February 2019, 19:47

It's at least planned to implement PCI in future releases. But that'll have to wait for now ;-)

jediknight · 04 June 2019, 00:56

any news?

b0lt-thrower · 18 February 2020, 15:32

Seems to be moribund

elenachen · 16 June 2021, 10:47

Hey you all.....sry for the long waiting.....

It's definitely a number too big for me....

Does someone want to step in an take the reigns?

Could be multiple persons....

If anyone would still be interested in anyways.

billt · 25 June 2021, 08:33

Quote:

Originally Posted by elenachen

Hey you all.....sry for the long waiting.....

It's definitely a number too big for me....

Does someone want to step in an take the reigns?

Could be multiple persons....

If anyone would still be interested in anyways.

Github?? You had mentioned long ago about open sourcing the design...

elenachen · 26 June 2021, 16:46

I created a github with the Kicad Project.....it's incomplete and my first project.....so don't expect much expertise

https://github.com/elenachenchen/A4000-ATX

Have fun with it!

Kind regards

Elena

24 May 2018, 21:34	#142
elenachen Registered User Join Date: Feb 2018 Location: Nürnberg Posts: 97	Sry, was very busy in the last few months. Second child was born 2 1/2 weeks ago. Now tidying up my workspace, hope I'll get some time to continue afterwards. Attached Thumbnails

26 May 2018, 08:35	#144
elenachen Registered User Join Date: Feb 2018 Location: Nürnberg Posts: 97	Thx and nope, there will be an eATX Version first. The Zorro slots need a lot of length. Last edited by elenachen; 26 May 2018 at 11:18.

11 February 2019, 18:37	#149
elenachen Registered User Join Date: Feb 2018 Location: Nürnberg Posts: 97	Thx Placement will take a while.....but making good progress so far Attached Thumbnails

13 February 2019, 16:09	#150
elenachen Registered User Join Date: Feb 2018 Location: Nürnberg Posts: 97	Most of the bigger components are placed. Places are not fixed yet, but I think most of them will stay where they are. I hope this will go well. I'm kind of nervous that it'll not work in the end Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A4000 Motherboard rev F	1time	support.Hardware	7	31 July 2012 18:09
Try repair an a4000 motherboard - help	TTD	support.Hardware	69	13 November 2011 23:03
My DIY A4000 tower	Secret Vampire	Hardware pics	1	29 July 2006 17:12
[FA] A4000 Motherboard	scan_x	MarketPlace	6	15 March 2004 15:19
[FA] A4000 Motherboard	scan_x	MarketPlace	2	12 January 2004 09:58

09 April 2018, 13:36	#141
mpattonm Registered User Join Date: Dec 2017 Location: Czech republic Posts: 46	Not very tidy indeed, but that is not the point. I would like to say its a great progress!

25 May 2018, 08:27	#143
Valken Registered User Join Date: Feb 2009 Location: Amiga Posts: 465	Congrats with the new baby! I understand with little gremlins running around. Looking forward to your project. Personally, I would ask for the cpu + fastram, to be on a daughter card for easier upgrades and to make it mini ITX format with only USB, HDMI, DisplayPorts and modern IO. Everything else can be plugged in with adapters while keeping the AGA + chipmem chips on board for compatibility. A Mini Amiga with real HW like the AmiITX would be awesome due to space and "relative" affordability. If you need someone to help fab the boards or any custom ASICs, let me know. I have a guy who helps me IC / ASIC development / production in China but MOQs are mainly the limiting factors.

29 August 2018, 08:40	#145
elenachen Registered User Join Date: Feb 2018 Location: Nürnberg Posts: 97	Hmm, had to repair my motorcycles first, because they had to leave the yard....well, now i won't get killed by my landlord. So, down to business. Another schematic page finished. Will still take a while for the rest though. I hope you all had a more stress free time than I did

16 September 2018, 13:59	#146
hese Registered User Join Date: Sep 2008 Location: Somewhere Posts: 223	Would it help you if I convert my A4000+ project to KiCad so you can get the schematics from it (as template) and you could start working on the actual board quicker?

10 February 2019, 17:04	#147
elenachen Registered User Join Date: Feb 2018 Location: Nürnberg Posts: 97	Finally doing the PCB Layout - Will still take a while, but making progress :-)

14 February 2019, 14:10	#151
AJCopland Registered User Join Date: Sep 2013 Location: Beeston, Nottinghamshire, UK Posts: 238	Really nice work elenachen!

14 February 2019, 14:22	#152
Marlon_ AmigaDev.com Join Date: Mar 2016 Location: Stockholm, Sweden Age: 35 Posts: 625	Neat! Good luck! =)

14 February 2019, 15:11	#153
elenachen Registered User Join Date: Feb 2018 Location: Nürnberg Posts: 97	Thx, I hope I'll get it to run in the end.

14 February 2019, 18:15	#154
shaf Registered User Join Date: Jun 2012 Location: Toronto / Canada Posts: 231	since Prometheus documentation is available is it technically possible to replace the ISA Slots with PCI Slots, if not now maybe in a later revision. Although I will still buy the board in it MATX state.

14 February 2019, 19:47	#155
elenachen Registered User Join Date: Feb 2018 Location: Nürnberg Posts: 97	It's at least planned to implement PCI in future releases. But that'll have to wait for now ;-)

04 June 2019, 00:56	#156
jediknight Registered User Join Date: Feb 2016 Location: bolton Posts: 145	any news?

18 February 2020, 15:32	#157
b0lt-thrower Registered User Join Date: Jun 2010 Location: US Posts: 111	Seems to be moribund

16 June 2021, 10:47	#158
elenachen Registered User Join Date: Feb 2018 Location: Nürnberg Posts: 97	Hey you all.....sry for the long waiting..... It's definitely a number too big for me.... Does someone want to step in an take the reigns? Could be multiple persons.... If anyone would still be interested in anyways.

26 June 2021, 16:46	#160
elenachen Registered User Join Date: Feb 2018 Location: Nürnberg Posts: 97	I created a github with the Kicad Project.....it's incomplete and my first project.....so don't expect much expertise https://github.com/elenachenchen/A4000-ATX Have fun with it! Kind regards Elena

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)