English Amiga Board


Go Back   English Amiga Board > Support > support.Hardware

 
 
Thread Tools
Old 25 January 2022, 21:06   #1
KLund1
Registered User

 
Join Date: Oct 2018
Location: Livermore CA
Posts: 31
Amiga 1000 Keyboard Plunger Problem...

Hello,
I have a 1000 keyboard with a broken white key stalk plunger that has split in half. I want to glue it carefully back together.

I have tried superglue, and acetone and these do not work. They hold the two vertical halves together lightly, but the slightest pressure from a test fitting the keycap back on slits it again.

I only put the slightest amount of glue/acetone along the broken edges so it will still slide up and down. I let dry for hours before testing.
What type of glue would be better?
Thanks
KLund1 is offline  
Old 25 January 2022, 21:18   #2
coldacid
WinUAE 4000/40, V4SA
coldacid's Avatar
 
Join Date: Apr 2020
Location: Candinavia
Posts: 474
Try plastic cement, maybe pinning the two pieces together first (look up miniatures modelling techniques).
coldacid is offline  
Old 25 January 2022, 21:21   #3
deimos
It's coming back!

deimos's Avatar
 
Join Date: Jul 2018
Location: comp.sys.amiga
Posts: 762
There is a 2 part superglue for plastics,

https://www.amazon.fr/Loctite-transp...dp/B008F7YHLS/

has a liquid activator that you put on to both surfaces first. No idea whether it will work for you, and you'll have to clean off all traces of previous glue first, but it has worked for me in the past, for gluing plastics that superglue otherwise won't work with - gluing plastic is hard.

Last edited by deimos; 25 January 2022 at 21:34.
deimos is offline  
Old 25 January 2022, 22:10   #4
KLund1
Registered User

 
Join Date: Oct 2018
Location: Livermore CA
Posts: 31
Thanks for the very quick replies !!
My hands could not do pinning such small pieces, but the idea is sound. Thanks
I'll try the two part superglue. I have never tries that.
I'll report back with results.
Again thanks!
KLund1 is offline  
Old 26 January 2022, 00:52   #5
pandy71
Registered User
 
Join Date: Jun 2010
Location: PL
Posts: 1,974
I know how this sounds but best is reinforcing both pieces with metal wire (paper clip wire?) - hot iron, metal wire U shape or O shape, flat surface, melt wire in plastic at least to surface level or slightly bellow, iron should have temperature not to high to avoid plastic decomposition (but sufficient to melt plastic) you can use soldering iron with precise temperature control or dedicated plastic soldering iron.
Glue both parts together before reinforcing it with wire...
Later you can finish part to hide metal wire (you can use dedicated plastic putty).

Why reinforcement is required ?? - forces are high and they will accumulate at the broken edge - normal glue, even epoxy will be probably insufficient to resist, metal wire will reinforce part sufficiently so everything will work fine.

you can practice on something else to avoid potential damages on plunger surface

good luck!
pandy71 is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
WANTED: A4000 green keyboard plunger utukku MarketPlace 3 08 April 2021 07:08
A1000 keyboard plunger/s rossb request.Other 2 02 September 2019 19:09
WTB: Amiga 1000 keyboard dragnet MarketPlace 0 19 October 2017 07:39
Amiga 1000 keyboard mortismaker support.Hardware 3 20 November 2008 16:49
Amiga 1000 keyboard nash67 support.Hardware 4 22 July 2003 23:48

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 23:01.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Page generated in 0.06626 seconds with 13 queries