![]() |
![]() |
#1 |
Registered User
Join Date: Dec 2017
Location: Moscow
Posts: 108
|
Cannot get connected with PCMCIA WiFi card
Hello,
I got OS 3.9 and apollo 1260 and prism2 AirLancer MC11 card. And Miami. And everything else. 1. I installed new prism drivers with WPA support. During installation, I prompted my network name and password 2. I added C:SetPrism2Defaults SSID xxxxx KEY xxxxxxxxxx into user startup and got Error - Unknown Command C:SetPrism2Defaults during loading. (naturally, I replaced xxxxx with real values - just in case) So, how do I basically tell my password and network name to Amiga? Last edited by Kppot; 01 September 2018 at 19:46. |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2017
Location: Moscow
Posts: 108
|
Ah, right okay, I am an idiot. Since prism2v2 has WPA support it generates a key (which I do hope stored somewhere).
So to the next move. Miami cannot see dynamic IP address and DNS, so I input it myself, it went "Online", however, Aweb browser says it cannot resolve any host name (like aminet.net) The main problem is that my router says there were no additional clients, but my phone and my PC. Last edited by Kppot; 01 September 2018 at 19:46. |
![]() |
![]() |
#3 |
Registered User
Join Date: Dec 2017
Location: Moscow
Posts: 108
|
Here are short videos for Miami setup
[ Show youtube player ] and for online [ Show youtube player ] |
![]() |
![]() |
#4 |
Registered User
Join Date: Dec 2008
Location: Norwich, UK
Posts: 672
|
Hi. Your card supports only WPA/TKIP. It's an Orinoco Gold clone. It's the same for Thomson SpeedTouch 110 - WPA/TKIP only.
Set your router to WPA/TKIP - no mixed mode, no WPA/WPA2. It has to be WPA/TKIP. Also, set B/G or B/G/N mode. These cards support WPA2/AES: https://www.ebay.co.uk/itm/163233969669 Last edited by Sir_Lucas; 01 September 2018 at 22:05. |
![]() |
![]() |
#5 |
Registered User
Join Date: Dec 2017
Location: Moscow
Posts: 108
|
Right so I got only WAP-PSK with TKIP encoding, like this
http://joxi.ru/KAxbR8wTMLKx9m I turned TKIP instead of AES, no success though |
![]() |
![]() |
#6 |
Registered User
Join Date: Dec 2008
Location: Norwich, UK
Posts: 672
|
Yes, you've got WPA/TKIP. Do you have B/G or B/G/N as well?
|
![]() |
![]() |
#7 |
Registered User
Join Date: Dec 2017
Location: Moscow
Posts: 108
|
Nope, looks like I don't. Only those options on picture are available
|
![]() |
![]() |
#8 |
Registered User
Join Date: Dec 2008
Location: Norwich, UK
Posts: 672
|
Your router options look pretty all right. Have a look around. You may have the option to set it up - B/G mode or B/G/N.
|
![]() |
![]() |
#9 |
Registered User
Join Date: Dec 2017
Location: Moscow
Posts: 108
|
|
![]() |
![]() |
#10 |
Registered User
Join Date: Dec 2017
Location: Moscow
Posts: 108
|
Do you think apart from that everything else works fine, with static IP and DNS? How can I check that?
|
![]() |
![]() |
#11 |
Registered User
Join Date: Dec 2008
Location: Norwich, UK
Posts: 672
|
Leave it B/G for now. Great, now we are getting somewhere.
Install the drivers once again - http://aminet.net/package/driver/net/prism2v2 After installing the drivers reboot your Amiga. Once you get it running and back at Workbench screen edit your User-startup sequence. Put a semi-colon in front of: ;run <>NIL: C:wirelessmanager prism2.device it should look like that. Save and reboot your Amiga once again. After rebooting open your CLI and type in: C:wirelessmanager prism2.device Here's how it should look like: [ Show youtube player ] |
![]() |
![]() |
#12 |
Registered User
Join Date: Dec 2017
Location: Moscow
Posts: 108
|
Right so I got this for AES
http://joxi.ru/1A5Xe7ninEbqw2 And this for TKIP. http://joxi.ru/xAevlQjTpeXzgr Later one has connection, however, browser still cannot resolve host names |
![]() |
![]() |
#13 |
Registered User
Join Date: Dec 2008
Location: Norwich, UK
Posts: 672
|
Congratulations!! You've got yourself associated with your router using WPA/TKIP.
Now, you need the proper tutorial for the MiamiDX. Have a look here: [ Show youtube player ] Use prism2.device instead of 3c589.device Remember, first you have to associate with your router using CLI: C:wirelessmanager prism2.device Then run MiamiDX. Let me know if it works ![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Dec 2017
Location: Moscow
Posts: 108
|
Yes, we made some progress. However, despite the hardware is connected to wi-fi, no further go, same story
[ Show youtube player ] Maybe I did smth wrong my Miami UI is different from those on youtube |
![]() |
![]() |
#15 |
Registered User
Join Date: Dec 2008
Location: Norwich, UK
Posts: 672
|
You've got Miami installed. My video tutorial is for the MiamiDX.
Install MiamiDX and try once again: http://aminet.net/package/comm/tcp/MiamiDx10cmain http://aminet.net/package/comm/tcp/MiamiDx10c-MUI http://www.fatcat.vispa.com/keyring/...iamiDXKeys.lha You are nearly there ![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Dec 2017
Location: Moscow
Posts: 108
|
Nah
![]() Still no luck! [ Show youtube player ] |
![]() |
![]() |
#17 |
Registered User
Join Date: Dec 2008
Location: Norwich, UK
Posts: 672
|
Can you do Query? Do the digits change? Also what's your MTU? It should be 1500.
Last but not least, do you have CardPatch and CardReset installed? C:CardPatch run >NIL: C:CardReset TICKS 50 Put it on top of your Startup-Sequence http://aminet.net/package/util/boot/CardPatch http://aminet.net/package/util/boot/CardReset |
![]() |
![]() |
#18 | |
Registered User
Join Date: Dec 2017
Location: Moscow
Posts: 108
|
yes, they do when I set up "new hardware", but once setted up, they do not change. If I remove hardware and create new, they do change with query, and then again stops
Mine is 1452 my ISP recommends exactly that number, while Miami tells me sana-II drivers have MTU 1500 (query window) Quote:
![]() |
|
![]() |
![]() |
#19 |
Amigan
![]() Join Date: Feb 2012
Location: London
Posts: 1,323
|
Your Gateway address is wrong. You have 255.255.255.0 but it should be something like 192.168.0.1. Check in Windows by typing ipconfig at a command prompt.
|
![]() |
![]() |
#20 | |
Registered User
Join Date: Dec 2017
Location: Moscow
Posts: 108
|
Quote:
![]() http://joxi.ru/gmvbZywTLNegWm |
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
25 x WIFI CARDS - LINKSYS - WPA2/AES - AMIGA - A600/A1200 PCMCIA WIFI | Sir_Lucas | MarketPlace | 225 | 02 October 2022 19:54 |
25 x WIFI CARDS - ZYXEL - WPA2/AES - AMIGA - A600/A1200 PCMCIA WIFI | Sir_Lucas | MarketPlace | 84 | 02 August 2020 17:16 |
Need help getting online with a Speedtouch PCMCIA 802.11b WiFi card | trydowave | support.Hardware | 1 | 28 October 2013 19:02 |
PCMCIA Wifi? | tonyyeb | support.Hardware | 52 | 01 September 2010 15:45 |
Problems with AIRLANCER MC-11 wifi pcmcia card on amiga 1200 | piemmeweb | support.Hardware | 1 | 04 June 2010 02:34 |
|
|