AmiDuke - New Duke Nukem 3D port for AGA - Page 3

liviux76 · 04 October 2015, 19:09

Hi, I tried the game on my A1200 with a Blizzard 1260/66 and it works very well. Thanks so much for your great work!

Arnie · 04 October 2015, 19:13

Aminet has now updated, you can get it from the Zone or Aminet.

eXeler0 · 04 October 2015, 19:14

Slightly off topic maybe but those of you running overclocked 060's. What software reports 105 MIPS on a 80MHz 060? Mine is at 66MHz atm and SysInfo is reporting 51 MIPS...

trixster · 04 October 2015, 19:47

Sysspeed. Sysinfo doesn't report an 060s speed correctly.

NovaCoder · 05 October 2015, 12:45

v1.06 in the Zone, should be slightly quicker.

liviux76 · 05 October 2015, 15:02

Quote:

Originally Posted by NovaCoder

v1.06 in the Zone, should be slightly quicker.

Great!
I'll try it later this evening!

trixster · 05 October 2015, 16:39

Yep, seeing a decent improvement in fps

Sir_Lucas · 05 October 2015, 20:36

Impressive!!! Thank you very much

liviux76 · 05 October 2015, 20:36

Quote:

Originally Posted by liviux76

Great!
I'll try it later this evening!

I just tried it but unfortunately for me it is not an improvement. The gameplay seems slower (I haven't checked the fps) and I am also getting some glitches that I didn't have with the previous version (with the previous version I played more than one hour without any problem).

NovaCoder · 05 October 2015, 22:41

Mmmm, OK.... Maybe optimized too much then

SKOLMAN_MWS · 05 October 2015, 23:03

@NovaCoder

Is it possible to insert the code C2P for PPC?

http://aminet.net/package/dev/asm/noe_ppc_c2p
http://aminet.net/package/game/shoot/Heretic

PPC c2p with RtgMaster 68k +10fps on 603e160MHz+040/25MHz
http://aminet.net/package/driver/video/RTGoesWarpOS

NovaCoder · 05 October 2015, 23:56

Quote:

Originally Posted by SKOLMAN_MWS

@NovaCoder

Is it possible to insert the code C2P for PPC?

http://aminet.net/package/dev/asm/noe_ppc_c2p
http://aminet.net/package/game/shoot/Heretic

Sorry my friend, I'm a 68K coder....I have no knowledge of PPC.

Update: v1.07 now in the Zone

Sandro · 06 October 2015, 00:51

Quote:

Originally Posted by NovaCoder

That's strange, I didn't know that all of them were lame

I was having great fun playing AmiDuke until 2 AM on my A1200 the other night at a lovely 20+ FPS

ok but is your Duke port faster and better than the MAC version running on shapeshifter or fusion?

NovaCoder · 06 October 2015, 01:01

Quote:

Originally Posted by Sandro

ok but is your Duke port faster and better than the MAC version running on shapeshifter or fusion?

No idea, I've never tried ShapeShifter on my A1200.

My port has stuff like user definable keys and mouse buttons from within game, does the old MAC version support that kind of thing?

Retrofan · 06 October 2015, 01:12

Venga Sandro, deja de joder al hombre. El tipo estaba retirado y tu le dices que lo q acaba de lanzar va lento y es una mierda comparado al ShapeShifter. ¿Qué consigues? Dale un poco de coba hombre que si no no hace nada nuevo. Esto entre nosotros. Y ahora mira que mierda de traducción voy a hacer.

Come on Sandro, it works right. I doubt it works as well on ShapeShifter as you say. On it it can't run as fast as his port.

Sandro · 06 October 2015, 01:34

Quote:

Originally Posted by NovaCoder

No idea, I've never tried ShapeShifter on my A1200.

My port has stuff like user definable keys and mouse buttons from within game, does the old MAC version support that kind of thing?

yes mac version support mouse and definable keys, also it support high res , works very fine in AGA using mmu refreshed video driver
you can download it here
http://macintoshgarden.org/games/duk...ic-edition-68k

maybe later I will test your port and I will compare with this

Retrofan · 06 October 2015, 01:49

Sandro I see you have skills running ShapeShifter. Maybe you can help me to improve my AKReal version to run it on WinUAE. It runs ok but I know it can be improved. You can send me a PM and we can talk.

Sandro · 06 October 2015, 02:44

Quote:

Originally Posted by Retrofan

Sandro I see you have skills running ShapeShifter. Maybe you can help me to improve my AKReal version to run it on WinUAE. It runs ok but I know it can be improved. You can send me a PM and we can talk.

on winuae is easy to run shapeshifter, only select P96 video driver, that's all
plz note that I'm not a expert on the MAC side
the expert member is cammy, she is capable to run shapeshifter even on the A600

ask her for help because she is very smart in this

arti040 · 06 October 2015, 07:50

@NovaCoder
YOU'RE da man!

OldB0y · 06 October 2015, 13:01

Nice one :-)

I'll give it a go - hopefully tonight - to see how it compares to Amiduke 0.3 - which runs runs very nicely on my standard 50Mhz 060

If anyone is interested, Amiduke 0.3 is available here:

http://users.neoscientists.org/~dante/

06 October 2015, 01:12	#55
Retrofan Ruler of the Universe Join Date: Mar 2010 Location: Lanzarote/Spain Posts: 6,185	Venga Sandro, deja de joder al hombre. El tipo estaba retirado y tu le dices que lo q acaba de lanzar va lento y es una mierda comparado al ShapeShifter. ¿Qué consigues? Dale un poco de coba hombre que si no no hace nada nuevo. Esto entre nosotros. Y ahora mira que mierda de traducción voy a hacer. Come on Sandro, it works right. I doubt it works as well on ShapeShifter as you say. On it it can't run as fast as his port. Last edited by Retrofan; 06 October 2015 at 01:19.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Duke Nukem 3D	cv643d	support.Games	47	11 June 2017 09:00
Duke Nukem 3d suped up (eDuke32)	vroom6sri	Retrogaming General Discussion	46	21 June 2007 15:19
Duke Nukem 3D ported to Amiga	Pyromania	Amiga scene	67	10 June 2006 21:14
Duke Nukem 3D for Amiga available	Bobic	Amiga scene	3	28 July 2003 18:53
duke nukem on amiga?	matthew	request.Old Rare Games	6	29 April 2002 14:46

04 October 2015, 19:09	#41
liviux76 Registered User Join Date: Jan 2014 Location: BO/Italy Posts: 711	Hi, I tried the game on my A1200 with a Blizzard 1260/66 and it works very well. Thanks so much for your great work!

04 October 2015, 19:13	#42
Arnie R.I.P Smudge 18-08-16 Join Date: Aug 2005 Location: Leicester/UK Age: 66 Posts: 3,968	Aminet has now updated, you can get it from the Zone or Aminet.

04 October 2015, 19:14	#43
eXeler0 Registered User Join Date: Feb 2015 Location: Sweden Age: 50 Posts: 2,946	Slightly off topic maybe but those of you running overclocked 060's. What software reports 105 MIPS on a 80MHz 060? Mine is at 66MHz atm and SysInfo is reporting 51 MIPS...

04 October 2015, 19:47	#44
trixster Guru Meditating Join Date: Jun 2014 Location: England Posts: 2,337	Sysspeed. Sysinfo doesn't report an 060s speed correctly.

05 October 2015, 12:45	#45
NovaCoder Registered User Join Date: Sep 2007 Location: Melbourne/Australia Posts: 4,400	v1.06 in the Zone, should be slightly quicker.

05 October 2015, 16:39	#47
trixster Guru Meditating Join Date: Jun 2014 Location: England Posts: 2,337	Yep, seeing a decent improvement in fps

05 October 2015, 20:36	#48
Sir_Lucas Registered User Join Date: Dec 2008 Location: Norwich, UK Posts: 668	Impressive!!! Thank you very much

05 October 2015, 22:41	#50
NovaCoder Registered User Join Date: Sep 2007 Location: Melbourne/Australia Posts: 4,400	Mmmm, OK.... Maybe optimized too much then

05 October 2015, 23:03	#51
SKOLMAN_MWS Registered User Join Date: Jan 2014 Location: Poland Posts: 168	@NovaCoder Is it possible to insert the code C2P for PPC? http://aminet.net/package/dev/asm/noe_ppc_c2p http://aminet.net/package/game/shoot/Heretic PPC c2p with RtgMaster 68k +10fps on 603e160MHz+040/25MHz http://aminet.net/package/driver/video/RTGoesWarpOS

06 October 2015, 01:49	#57
Retrofan Ruler of the Universe Join Date: Mar 2010 Location: Lanzarote/Spain Posts: 6,185	Sandro I see you have skills running ShapeShifter. Maybe you can help me to improve my AKReal version to run it on WinUAE. It runs ok but I know it can be improved. You can send me a PM and we can talk.

06 October 2015, 07:50	#59
arti040 Piotr Join Date: Jul 2013 Location: Lodz/Poland Age: 40 Posts: 203	@NovaCoder YOU'RE da man!

06 October 2015, 13:01	#60
OldB0y Registered User Join Date: Jan 2009 Location: Letchworth/UK Posts: 83	Nice one :-) I'll give it a go - hopefully tonight - to see how it compares to Amiduke 0.3 - which runs runs very nicely on my standard 50Mhz 060 If anyone is interested, Amiduke 0.3 is available here: http://users.neoscientists.org/~dante/

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)