![]() |
![]() |
#1 |
Registered User
Join Date: Mar 2010
Location: uk
Posts: 214
|
Gotek floppy emulator and A1200 Floppy Mod
Hi All
Now update My Amiga 1200 A1200, v3.1 Rom Microbotics M1230XA 40Mhz, 32Ram, No FPU, 4Gb CF Card, 24x CDrom, GBS-8200, Gotek USB Floppy Emulator. Now done the mod, Gotek floppy emulator and A1200 Floppy drive now running together at same time on a switch show in picture as you can see it ALL work ![]() ![]() STD twist PC Floppy lead You need to untwist the lead for the Amiga to work ![]() Now you need to fine pin 10 as show in picture and then wire up the switch illustrated ![]() Now adding Gotek floppy emulator board to you a1200 ( This is where I put mine, But you could put it anywhere else ) ![]() ![]() This is where I Put the switch for Gotek and A1200 floppy Now Back together now ready to TEST Now test Gotek drive Load game and it work fine ![]() Now test Amiga floppy drive As you can see in picture it working ![]() Now WB is load up as you can see in picture I have 3 Icons showing unreadable DF1, DF2, DF3 ( Dos anyone know how I can get rid of these I think it's to do with the Gotek drive ) Before I did the mod, Gotek drive only show DF0 as unreadable ANY help is appreciated Last edited by iowtheme; 20 November 2014 at 19:13. |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2006
Location: Thunder Bay, Canada
Posts: 4,323
|
Very Nice!
![]() |
![]() |
![]() |
#3 |
R.I.P Smudge 18-08-16
Join Date: Aug 2005
Location: Leicester/UK
Age: 66
Posts: 3,968
|
Can you just explain a bit more. Is it a DF0: DF1: switcher, or does it make only one drive active at a time?
|
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2010
Location: uk
Posts: 214
|
Hi Arnie
It is DF0: to DF0: switcher This means you can Boot from you original Floppy drive or Boot Gotek Drive, ( This gives you the best of both drive, So you can play you OLD game and format Floppys or the NEW way to play from USB ) You can ONLY boot one of the drive at a TIME. The Amiga ONLY see 1 Drive and NOT 2 Drive? Last edited by iowtheme; 20 November 2014 at 19:00. |
![]() |
![]() |
#5 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,918
|
Something is pulling low the ready signal.
|
![]() |
![]() |
#6 |
Registered User
Join Date: Mar 2010
Location: uk
Posts: 214
|
|
![]() |
![]() |
#7 |
Posts: n/a
|
Looks great!
|
![]() |
#8 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,918
|
Probably not the jumpers, unless you have adjusted them when you did this custom cable. Either the Gotek or the physical drive mechanism is doing it, to find out you can unplug the drive that is not currently selected to see if it helps.
|
![]() |
![]() |
#9 | |
Registered User
Join Date: Mar 2010
Location: uk
Posts: 214
|
Quote:
I will unplug Gotek or Floppy drive, Will let you know soon would it does Thank Jope |
|
![]() |
![]() |
#10 |
Professional slacker!
|
Really nice idea and looks great
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Apr 2010
Location: Italy
Posts: 1,136
|
i suppose you need excange pin 9 with 11 with double switch, set one drive ds0: and the other ds1:
|
![]() |
![]() |
#12 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,918
|
|
![]() |
![]() |
#13 |
Registered User
Join Date: Apr 2010
Location: Italy
Posts: 1,136
|
i have read this in old post, but need verify if both drive need set ds0:
|
![]() |
![]() |
#14 |
Registered User
Join Date: Sep 2014
Location: Maa
Posts: 10
|
Very nice idea to install a gotek on a1200... but i have a question, are any difference installing a gotek on a commodore or escom amiga?
|
![]() |
![]() |
#15 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,918
|
cpiac ah yes, now I understood. Yes, both drives should indeed be set to DS0 in order for the switch mod to work.. The A1200 has DS1 present in the internal header at least based on the schematics.
|
![]() |
![]() |
#16 |
Utterly Lost....
Join Date: Oct 2013
Location: Glasgow
Posts: 167
|
My Gotek LED's have just stopped working.
The drive itself is still working fine but I've got no LED display, it's completely blank. Anyone know where on the board I should check? |
![]() |
![]() |
#17 |
Registered User
Join Date: Mar 2010
Location: uk
Posts: 214
|
Hi All
How Tested Gotek and Floppy drive and test the format Floppys to, it work fine. I have now sorted the problem out. ![]() The problem was my PC floppy lead, ![]() so I buy new IDC connector 34 way this solve my problem. ![]() Then you are in Workbench and flip the switch same time it will show unreadable ![]() ![]() So I am NOW happy it is all working ![]() |
![]() |
![]() |
#18 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,918
|
You should always remove the floppy / usb stick from the unselected drive before turning the switch..
|
![]() |
![]() |
#19 |
Registered User
Join Date: May 2014
Location: hampshire
Posts: 67
|
bah can the images be revived for this mod? they are showing up dead fo me (and the OP was only november!)
|
![]() |
![]() |
#20 |
Super Member
Join Date: Sep 2014
Location: Wakefield
Age: 49
Posts: 1,335
|
It seems the OP has removed the images himself as there are no links when you quote the post and it was editted by him later when his issue was resolved.
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gotek floppy emulator & STD Floppy | iowtheme | support.Hardware | 1 | 15 November 2014 17:46 |
Gotek floppy emulator & Skick | iowtheme | support.Hardware | 20 | 24 October 2014 10:28 |
Gotek floppy emulator not working | Cooljerk | support.Hardware | 10 | 16 October 2014 08:27 |
FS: GOTEK Floppy Drive Emulator for AMIGA (fw1.5a) + USB TTL cable | LTAC | MarketPlace | 17 | 06 July 2014 14:51 |
USB HxC Floppy emulator and SD HxC Floppy Emulator by Lotharek on ext FDD | dirkies | Amiga scene | 1 | 03 April 2012 00:08 |
|
|