28 September 2019, 09:10 | #1 |
Oldtimer
Join Date: Nov 2010
Location: VXO / Sweden
Posts: 153
|
SysInfo 4.3 ready, finally
Changelog:
4.3:
Looking forward for feedback. Last edited by Geijer; 28 September 2019 at 10:53. Reason: Fixed links |
28 September 2019, 09:55 | #2 | |
PSPUAE DEV
|
Quote:
lha link broken. Not found. |
|
28 September 2019, 10:06 | #3 |
Oldtimer
Join Date: Nov 2010
Location: VXO / Sweden
Posts: 153
|
Ouch, character case error, fixed now. Thanks
Last edited by Geijer; 28 September 2019 at 10:14. |
28 September 2019, 10:38 | #4 |
Registered User
Join Date: Jan 2018
Location: NC /USA
Posts: 90
|
Both links are for the LHA-file can manually change it to .adf.
Under WinUAE icon looks distorted (problem solved second image). Kind of funny comments though? Last edited by LanceT; 28 September 2019 at 10:47. |
28 September 2019, 10:59 | #5 |
Oldtimer
Join Date: Nov 2010
Location: VXO / Sweden
Posts: 153
|
|
28 September 2019, 11:05 | #6 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,502
|
It is normal if OCS Agnus + ECS Denise + KS 3.1. OCS Agnus + ECS Denise is not supported by KS, it assumes ECS Agnus if ECS Denise is found. (Commonly, especially in emulation sprite corruption is not always visible because by default chip ram is cleared after powerup)
Last line having garbage is another clue. |
28 September 2019, 11:46 | #7 |
Registered User
Join Date: Aug 2014
Location: Brindisi (Italy)
Age: 70
Posts: 8,248
|
Because I on an RTG system get lower results from the user LanceT despite I have a very fast and performing system
Last edited by AMIGASYSTEM; 15 October 2019 at 17:04. |
28 September 2019, 12:38 | #8 |
Registered User
Join Date: Aug 2014
Location: Brindisi (Italy)
Age: 70
Posts: 8,248
|
@LanceT
What PC are you using which CPU? |
28 September 2019, 13:28 | #9 |
Registered User
Join Date: Sep 2018
Location: Nottingham
Posts: 340
|
Aweomme...I`ll give this a try on my A600 Furia.
|
28 September 2019, 14:31 | #10 |
Registered User
Join Date: Jan 2018
Location: NC /USA
Posts: 90
|
Still using a system I built 8 or so years ago.
Motherboard: CPU Type :HexaCore AMD Phenom II X6 Black Edition 1100T, 3647 MHz (18.5 x 197) Base = 3.8GHz Boost = 4.2GHZ Motherboard Name : Asus M4A89GTD Pro/USB3 (2 PCI, 1 PCI-E x1, 1 PCI-E x4, 2 PCI-E x16, 4 DDR3 DIMM, Audio, Video, Gigabit LAN, IEEE-1394) *** And I kind of cheated. I booted straight into the SYSINFO file. Not to Workbench *** |
28 September 2019, 15:37 | #11 |
Registered User
Join Date: Aug 2014
Location: Brindisi (Italy)
Age: 70
Posts: 8,248
|
|
28 September 2019, 16:25 | #12 |
Registered User
Join Date: Apr 2005
Location: digital hell, Germany, after 1984, but worse
Posts: 3,365
|
I would suggest to remove the decimal point and the 2 places behind it and expand the range for the benchmark results by 3 additional digits, because emulators like WinUAE are far too fast, their results are causing output overflows and then the highest digits are truncated on the left side. You can see that in the 2. screenshot from LanceT in post #4.
This range expansion should be done for output values of 1000 or higher. Btw, it seems that the field for the Dhrystones result is not properly cleared before another speed test writes out a new value. Last edited by PeterK; 28 September 2019 at 20:42. |
28 September 2019, 17:11 | #13 |
Registered User
Join Date: Oct 2014
Location: Klagenfurt / Austria
Posts: 1,559
|
on aca500plus with aca1221 sysinfo still displays 68ec020, which is wrong... don't mix up aca1221 with aca1221(ec).
i have aca1221 (real 020, no "ec"), 28mhz and 62mb fast ram on it. 020 "ec" cpu could not address more than 16mb. |
28 September 2019, 20:46 | #14 | ||
Oldtimer
Join Date: Nov 2010
Location: VXO / Sweden
Posts: 153
|
Quote:
Quote:
The code isn't 100% but shouldn't miss a non EC020 when fastram exists outside of 24bit adresses. |
||
28 September 2019, 20:55 | #15 |
Oldtimer
Join Date: Nov 2010
Location: VXO / Sweden
Posts: 153
|
|
29 September 2019, 00:18 | #16 | |
Registered User
Join Date: Dec 2018
Location: UK
Posts: 1,715
|
I get the following yellow Guru, when I use the ADF version:
Quote:
But this is on an A1200 rev 2B with only an A1208 memory expansion card in 4mb mode. I don't understand why this is shown in my setup? |
|
29 September 2019, 00:33 | #17 | |
Oldtimer
Join Date: Nov 2010
Location: VXO / Sweden
Posts: 153
|
Quote:
It is included to support as many different combinations of CPU / FPU / MMU as possible. Last edited by Geijer; 29 September 2019 at 00:45. |
|
29 September 2019, 00:54 | #18 |
Registered User
Join Date: Dec 2018
Location: UK
Posts: 1,715
|
Thanks for the correction - I was just too lazy to lookup the correct term for it.
OK, I'll just ignore it then. Thank you for continuing to update this great tool! |
29 September 2019, 10:31 | #19 |
Amigan
Join Date: Feb 2012
Location: London
Posts: 1,309
|
An idea: I appreciate Commodore never release a 68060 Amiga (I think!) but it would be nice to include 68060@50Mhz in the CPU comparison list.
|
29 September 2019, 12:18 | #20 |
Registered User
Join Date: Jul 2014
Location: Finland
Posts: 1,175
|
All the other speed bars are stock configurations.
With the 060 it becomes the question, comparison against which 060 board? There is a big difference between a 68060 on a 3640 and on a Cyberstorm MKIII. (Okay, this benchmark might be small enough it fits in 060 instruction cache and thus differences in memory speed might not matter that much but you get the idea) |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SYSInfo | Kitty | New to Emulation or Amiga scene | 8 | 22 April 2018 15:59 |
SysInfo 4.0 | Geijer | News | 185 | 13 September 2017 17:32 |
SYSInfo adf | Kitty | request.Apps | 15 | 09 November 2009 12:27 |
SysInfo Sofware | lopos2000 | support.Apps | 2 | 23 July 2005 11:48 |
Sysinfo ? | THX1138 | support.Apps | 4 | 10 November 2003 00:08 |
|
|