WHDLoad video & HD boot problem

EmuChicken · 19 January 2010, 09:54

1. WHDLoad video

Is there an option to set in the tooltypes, or in the prefs to set where the video starts from within WHDLoad games?
Right now, Im on a huge widescreen TFT thing, and all the games I play start with the video from around 2 cm from the top of the screen.

- Im on a japanese telly so, its prolly different for the guys not on 60hz ntsc sets ;/

2. HD wont boot ... unless...
I use the both mouse button press, then select to boot from DH0:
Im running from classicwb right now, ... looking into it atm, but the hd switch was set to "bootable" in the hdtoolbox thing. on a CF drive running on a SFS setup.

ta in advance,
Tim

StingRay · 19 January 2010, 10:01

Quote:

Originally Posted by EmuChicken

1. WHDLoad video

Is there an option to set in the tooltypes, or in the prefs to set where the video starts from within WHDLoad games?
Right now, Im on a huge widescreen TFT thing, and all the games I play start with the video from around 2 cm from the top of the screen.

Not possible since these values are defined in the Copperlists (i.e. each game would have to patched separately to change the display).

EmuChicken · 19 January 2010, 10:19

so if the slaves were patched itd be possible? - or is it hard coded into the games?

problem 2 is fixed, all I need to do is a soft reset and it loads... kinda wierd tho

StingRay · 19 January 2010, 10:23

Quote:

Originally Posted by EmuChicken

so if the slaves were patched itd be possible? - or is it hard coded into the games?

I wrote that "each game has to be patched separately", this answers this question. Short answer: NOT possible!

EmuChicken · 19 January 2010, 10:36

damn... playing sensi without seeing the bottom goal kinda misses the point ;/

FOL · 19 January 2010, 14:20

Quote:

Originally Posted by EmuChicken

damn... playing sensi without seeing the bottom goal kinda misses the point ;/

Misses the goal to,

.

19 January 2010, 09:54	#1
EmuChicken Senior Member Join Date: Jul 2004 Location: Nagoya, Japan (moved!) Age: 41 Posts: 746	WHDLoad video & HD boot problem 1. WHDLoad video Is there an option to set in the tooltypes, or in the prefs to set where the video starts from within WHDLoad games? Right now, Im on a huge widescreen TFT thing, and all the games I play start with the video from around 2 cm from the top of the screen. - Im on a japanese telly so, its prolly different for the guys not on 60hz ntsc sets ;/ 2. HD wont boot ... unless... I use the both mouse button press, then select to boot from DH0: Im running from classicwb right now, ... looking into it atm, but the hd switch was set to "bootable" in the hdtoolbox thing. on a CF drive running on a SFS setup. ta in advance, Tim

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A1200 video repair problem & solution	kipper2k	Hardware pics	5	28 September 2015 06:50
Amiga A1200 RGB & composite video problem solution!	Anemos	support.Hardware	24	24 September 2015 08:36
A500 Video/Boot problem.	Aura Sensation	support.Hardware	9	13 February 2008 12:13
Another World WHDload & Sprite problem!	immodium	support.Games	6	03 November 2005 21:04
moonstone hd with winuae & whdload problem	Unregistered	support.WinUAE	0	15 August 2002 09:20

19 January 2010, 10:19	#3
EmuChicken Senior Member Join Date: Jul 2004 Location: Nagoya, Japan (moved!) Age: 41 Posts: 746	so if the slaves were patched itd be possible? - or is it hard coded into the games? problem 2 is fixed, all I need to do is a soft reset and it loads... kinda wierd tho

19 January 2010, 10:36	#5
EmuChicken Senior Member Join Date: Jul 2004 Location: Nagoya, Japan (moved!) Age: 41 Posts: 746	damn... playing sensi without seeing the bottom goal kinda misses the point ;/

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)