7-bit hardware

[McTrinsic]

I wouldn’t mind a driver for an ETH module for the SPI2CP.

[spidi]

Coming soon

Wicher 520EC




Specification

• AmigaA500/A500+ compatibility ,
• CPU support: MC68EC020,
• supported CPU clock speeds: 25, 33 MHz,
• guaranteed to run at 25 MHz,
• ram memory: 16MB SDRAM (AmigaOS uses 11MB),
• Amiga A600-compatible IDE controller (required Kickstart >= 2.05 (37.350)),
• MapRom, BootRom function,
• SPI controller, RTC,
• Kickstart: recommended Kickstart 3.1 or up,

SPI BusBoard

• MINI ENC28J60 ethernet module,
• microSD card slot,

Drivers

• SD Card
• DS1306 RTC
• ENC28J60 Ethernet

[utri007]

Originally Posted by spidi

Will there be a NIC driver for a SPI2CP?

[spidi]

Originally Posted by utri007

Will there be a NIC driver for a SPI2CP?

Clock port on the A1200 board is causing problems with interrupt handling on the SPICP and Ethernet module. If I find the cause, the driver will appear.

[Lemaru]

Are there any further runs if the SUM 1200 being planned? They seem to be out of stock everywhere

[utri007]

Originally Posted by spidi

Clock port on the A1200 board is causing problems with interrupt handling on the SPICP and Ethernet module. If I find the cause, the driver will appear.

I would like to use this with accelerator with a clockport. There are plenty of harware with clock port. I have a Buddha, Elbox ZIV and this T30 accelerator.

Would all of these has some problems with interupts?

[spudje]

Is there a way to build your own RysMK2 firmware or do button mapping. I would love to give the combination of the RysMK2, 8Bitdo Wireless USB adapter & 8Bitdo controller another go. It's just a pity the default key button mapping is not usable (star button of controller is fire iirc). 7-bit already created a test firmware some time ago but that one didn't work.