![]() |
![]() |
#1 |
Registered User
Join Date: Feb 2015
Location: Sweden
Posts: 139
|
Step by step help lha to adf
Hi,
sorry for asking about this but I google and google and never find a guide that helps me figuring this out. I want to transfer, for example, iff samples downloaded on my real mac to my real gotek equipped amiga 500. The iff samples come in a lha archives. To access them through the gotek they need to be extracted onto an adf file. I read that the smoothest way to achieve this is to use winUAE. Same as FS-UAE? That is what I found for mac anyway. Following this guide: https://amihelper.blogspot.com/2020/...ha-to-adf.html In FSUAE: Insert a blank virtual floppy ("fl1.adf") - DONE Mount a folder as a hard drive ("HD1") - DONE Put the lha archive ("st-01.lha") in this - DONE Start the emulator And now... how do I make this happen? Do I need to load workbench first? Where do I write the command? How to I target the files? Code:
lha x myarchive.lha df0: ![]() Optionally show me an easier way. Using osx Terminal? ![]() Cheers |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2020
Location: .ch
Posts: 76
|
you could just get ADFMaster https://matze1887.itch.io/adfmaster
|
![]() |
![]() |
#3 | |
Registered User
Join Date: Jan 2016
Location: Germany
Posts: 388
|
Quote:
Then boot that Workbench -> Open Shell (CLI) -> type in "LHA X MYARCHIVE.LHA DF0:" and away you go ... of course the files have to fit on one ADF file in size ![]() |
|
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2015
Location: Sweden
Posts: 139
|
Thanks, I managed to extract the lha.run in the hard drive folder. But how do I get workbench on the hard drive? I have only used workbench on floppies. I guess I need to copy/install it in the harddrive?
|
![]() |
![]() |
#6 | |
Registered User
Join Date: Jan 2016
Location: Germany
Posts: 388
|
Quote:
![]() |
|
![]() |
![]() |
#7 |
Registered User
Join Date: Feb 2015
Location: Sweden
Posts: 139
|
Now I can not start the CLI, givens me the this error:
fsuae software failure Line 1111 (F) Emulator/Coprocessor failure attached a screenshot I was messing around with the settings in FS-UAE Launcher to make the emulator run faster (its slower than my real amiga 500...). set 1 mb of slow ram, put the floppy on turbo, etc. I tried to use kickstart 3.1 to install WB3.1, but when that seemed messy I tried to go back. Now even if I reset all the settings in the launcher I can not start CLI from the wb1.3 adf I used from the start. plz help. |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2016
Location: Germany
Posts: 388
|
Then start from scratch ...
You'll need : Kick 3.1 Workbench 3.1 (emulated) HDD lha.run any .lha archive FS-UAE has preconfigured Configurations for A1200 with Kick 3.1, start with that ... |
![]() |
![]() |
#9 |
Registered User
Join Date: Feb 2015
Location: Sweden
Posts: 139
|
Tried to install both wb3.1 and wb3.0 with bloodwych uae installer
following this guide: https://fs-uae.net/installing-classicwb-in-fs-uae wb3.1 - os said there was some error in the disk wb3.0 - stuck on "Optimising ClassicWB this will take a few minutes..." -left it running over the night, still stuck. I tried to set the 1200 with non expanded ram, 4 mb ram, 8 mb ram. Also tried to enable 2 mb chip ram although I assume this is set by default. plz help. |
![]() |
![]() |
#10 |
Registered User
Join Date: Feb 2015
Location: Sweden
Posts: 139
|
Hold it, it seemed to work! Wb3.0. Tbc
|
![]() |
![]() |
#11 | |
Registered User
Join Date: Jan 2015
Location: australia
Posts: 586
|
Quote:
These were floppy discs, long time ago someone packed them to .DMS files, but I can't find my old archive of same ATM. I guess they got packed in .lha archives over the years. The original files are still out there tho'.. https://archive.org/details/AmigaSTX...us_conversions |
|
![]() |
![]() |
#12 |
Registered User
Join Date: Feb 2015
Location: Sweden
Posts: 139
|
|
![]() |
![]() |
#13 |
Registered User
Join Date: Mar 2020
Location: UK
Posts: 257
|
A much easier way to do this on a Mac is to download "The Unarchiver" from the Mac app store which will extract the .lha files, and "HXC Floppy Emulator Software" from here https://hxc2001.com/download/floppy_drive_emulator/ which will let you create ADF files then drag and drop files to them directly from Mac OS. You can create and use high density ADFs to fit more files on them at a time.
|
![]() |
![]() |
#14 | |
Registered User
Join Date: Feb 2015
Location: Sweden
Posts: 139
|
Quote:
I tried to get AmigaPal working but it is broken for OSX. It is a shame that I can't the get emulator to a workable state, but now I can survive without. ![]() ![]() ![]() The Unarchiver plus HXC Floppy Emulator Software should be mentioned in a sticky here somewhere! |
|
![]() |
![]() |
#15 | |
Registered User
Join Date: Aug 2014
Location: Germany
Posts: 56
|
Quote:
Don't known how OSX handles the File attributes (protection bits) maybe they are more identical to one the Amiga use. Just be aware that at least on Windows people usually run sooner than later into issues where for example the Amiga "executable" or "script" bit gets set wrong when unpacked at another Operating System and transferred back that way. Or the case that the "H" bit not actually means "hidden" like almost everywhere else but "hold" on Amiga. |
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Step-by-step CD32 lens replacement (with pics) | Amiga1992 | support.Hardware | 65 | 28 November 2019 14:36 |
AmigaOS 4.1 Final Edition A1200 / Blizzard PPC Installation Step-by-Step Guide | headkase | support.WinUAE | 22 | 15 November 2017 06:03 |
Looking for a step-by-step guide to install BPPC on A1200 in WinUAE | headkase | support.WinUAE | 1 | 29 June 2016 00:59 |
LCD Monitor mod (hardware pr0n, step by step) | Shoonay | Hardware pics | 11 | 16 November 2015 21:13 |
Step by Step guide for installing WHDLoad and games for complete newbies? | daro2096 | support.Games | 9 | 11 March 2013 21:59 |
|
|