23 August 2016, 15:15 | #41 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,519
|
I'll delay this fix for later because there is some annoying incompatibility with nvidia gsync display (even when gsync is switched off. I upgraded to Acer X34 few months ago) and low latency vsync. It works very badly. I need to find out how to make it work again. Perhaps secondary normal monitor works normally or something..
|
23 August 2016, 15:22 | #42 |
Missile Command Champion
Join Date: Aug 2005
Location: Germany
Age: 52
Posts: 12,449
|
Ah, ok. If you have a test version sometime later i will try it of course.
|
23 August 2016, 15:50 | #43 |
Registered User
Join Date: Aug 2004
Location:
Posts: 3,343
|
I tested a config with Fastlane, 68040 and 32MB Z3 RAM on 3.4.0b1. I get a dialog saying "Out of memory or too much Z3 autoconfig space configured." when I load it and click Start. No dialog in 3.3.0.
Log output for 3.3.0 and 3.4.0b1 plus config attached. (I'm testing in Wine btw.) Autoconfig board list: Card 01: '<no name>' no autoconfig. Card 02: 'Z3 Fast RAM' a9.0a.f0.00.21.40.00.00.00.00.00.00.00.00.00.00 MID 8512 (2140) PID 10 (0a) SER 00000000 Z3 0x40000000 0x10000000 32M RAM 0 Card 03: 'Fastlane' 91.0b.70.00.21.40.00.00.00.00.08.00.00.00.00.00 MID 8512 (2140) PID 11 (0b) SER 00000000 Z3 0x42000000 0x12000000 32M ROM 1 END NATMEM: Not enough memory for Z3REAL! Out of memory or too much Z3 autoconfig space configured. |
23 August 2016, 16:04 | #44 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,519
|
Quote:
Ticking custom board order and making sure CDTV DMAC is first in the list should also fix it. |
|
23 August 2016, 16:04 | #45 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,519
|
Quote:
|
|
23 August 2016, 16:12 | #46 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,519
|
Yes.
Quote:
|
|
23 August 2016, 16:14 | #47 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,519
|
If above winuae.7z still does not work, attach also log.
|
23 August 2016, 16:41 | #48 | |
R.I.P Smudge 18-08-16
Join Date: Aug 2005
Location: Leicester/UK
Age: 66
Posts: 3,968
|
Quote:
EDIT: Scratch that. I re-downloaded the Winuae fix and it's working now . Last edited by Arnie; 07 September 2016 at 15:50. |
|
23 August 2016, 19:36 | #49 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,519
|
|
23 August 2016, 20:24 | #50 |
Registered User
Join Date: Mar 2016
Location: Gothenburg / Sweden
Posts: 23
|
it doesnt work with the http://www.winuae.net/files/b/winuae.7z either
|
23 August 2016, 20:47 | #51 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,519
|
Quote:
Does switching off JIT make any difference? Removal of all harddrives except boot drive? |
|
23 August 2016, 22:10 | #52 |
Registered User
Join Date: Jul 2014
Location: Katowice/Poland
Posts: 51
|
My config also crash at load (XPSP3, WB3.1). Attached logs with 3.3.0 (works ok) and latest winuae.7z (crash). I noticed it's load when deleted "uaegfx" and "uaegfx.card" from devs:monitors.
(sorry for my english) |
24 August 2016, 05:39 | #53 |
R.I.P Smudge 18-08-16
Join Date: Aug 2005
Location: Leicester/UK
Age: 66
Posts: 3,968
|
OS4.1 PicassoIV
PicassoIV is not loading with my config in 3.4. Works in 3.3. Config +Logs attached. EDIT: Moving the PicassoIV up the hardware list results in a crash. Logs attached. Last edited by Arnie; 07 September 2016 at 15:50. |
24 August 2016, 17:23 | #54 |
Registered User
Join Date: Aug 2014
Location: Brindisi (Italy)
Age: 70
Posts: 8,252
|
Thanks Toni, I discovered with surprise that now with OS4.1 can a Switch UAE Zorro III / Picasso IV without changing prefs screen mode on Workbench (conversely crashes). On OS3 (AFA OS) is not so, i have to hand-edit the prefs in ScreenMode, Attaching video exhaustive, set Youtube HQ.
[ Show youtube player ] Last edited by AMIGASYSTEM; 25 August 2016 at 11:37. |
24 August 2016, 17:37 | #55 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,519
|
Quote:
|
|
24 August 2016, 17:57 | #56 |
Registered User
Join Date: Aug 2014
Location: Brindisi (Italy)
Age: 70
Posts: 8,252
|
|
24 August 2016, 18:01 | #57 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,519
|
|
24 August 2016, 18:08 | #58 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,519
|
I'd wait a bit before everything stabilizes before benchmarking too much..
Quote:
|
|
24 August 2016, 18:22 | #59 |
Registered User
Join Date: Aug 2014
Location: Brindisi (Italy)
Age: 70
Posts: 8,252
|
|
24 August 2016, 18:50 | #60 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,519
|
http://www.winuae.net/files/b/winuae_3400b2.7z
http://www.winuae.net/files/b/winuae64_3400b2.7z Beta 2: - Needed natmem space also included IO only Z3 boards but only RAM and VRAM boards should count. Fixes most "out of memory" errors. - RTG VRAM outside of natmem space handling is back, RTG works again in 32-bit Windows in "Real" Z3 mode. (also in "UAE" mode if RTG was not first Z3 board and previous board(s) was large enough) - A2065 didn't work if accessed by PPC CPU. - Mainboard built-in autoconfig devices were movable (CDTV and A3000 DMAC). - Hardware info panel move up/down buttons are now disabled when unmovable item is selected. - Automatic Z3 mapping mode selected UAE mode even when it was not needed. (no JIT direct and not enough natmem space) - Natmem allocation is still used (if possible) even when starting emulation without direct jit to have better chance for on the fly direct jit switching. - Low latency vsync fixed. This should fix most b1 bugs but may also introduce new ones, internal memory handling is still rewritten (some odd memory handling stuff since the JIT was first added are finally going away) |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WinUAE 3.0.0 beta series (was 2.8.2/2.9.0) | Toni Wilen | support.WinUAE | 1010 | 15 December 2014 13:41 |
WinUAE 2.7.0 beta series | Toni Wilen | support.WinUAE | 326 | 03 December 2013 23:37 |
WinUAE 2.5.0 Beta series (Was 2.4.2) | Toni Wilen | support.WinUAE | 310 | 01 December 2012 18:02 |
WinUAE 2.3.3 beta series | Toni Wilen | support.WinUAE | 124 | 17 September 2011 15:48 |
WinUAE 1.5.3 beta series | Toni Wilen | support.WinUAE | 58 | 09 November 2008 13:46 |
|
|