![]() |
![]() |
#1 |
Posts: n/a
|
![]()
How you get hard drive to work on UAE, I got all the workbench but I don't know how to get the harddrive to work on the amiga emu.
//RCK: converted to normal size... |
![]() |
#2 |
Zone Friend
Join Date: Mar 2001
Location: UK
Age: 45
Posts: 117
|
Your physical PC drive or an emulated drive?
To get your physical hard drive to work in WinUAE simply launch the emulator using the configuration you like best, insert your Workbench ADFs into the floppies tab and then click the Hard Drives tab, make sure you click "Add PC drives at startup" and press OK to start. When Workbench loads you will notice that your PC hard drive(s) and CD-ROM(s) are loaded for ya. On the other hand if you would like to create a virtual hard drive (HDF) you will need to follow these steps. o Launch WinUAE o Load your Workbench Configuration (one which you think would work best with Workbench) o Click the Hard Drives tab o Click Add Hardfile o Under "New Hard File" enter "14245888" in the text box and hit Create o Select a location to save your new HDF o Save your configuration (with the New HDF inserted) o Insert your Workbench ADFs into the Floppies tab o Click OK to start the emulator Now your virtual hard drive won't be formatted so you can't use it - YET, follow these instructions: o In Workbench left click your HDF o Hold the Right Mouse button and move over to Icons followed by "Format Disk" o Release the mouse button and hit format After doing that you need to copy/install your Workbench disks over to your HDF and bingo. Hope that helps, you can find more help at: www.commodore-ale.com In the guides section. NOTE: The above will create a 13.4MB HDF image, if you would like a larger hard drive you will need to work the MB size out in Bytes. |
![]() |
![]() |
#3 |
Posts: n/a
|
![]()
WEll i had the same problem with winuae v8.14r3 and higher. just couldent get it to work. but....http://www.agnus.org.uk/WinUAE-Kaill...aillera_r1.zip
did the trick for me as well as fixing a few others |
![]() |
#4 |
RIP Friends
Join Date: Sep 2005
Location: UK
Posts: 2,157
|
Try changing your kickstard rom image. I have just tried a 3.5 rom and winuae and winfellow would not load the emu HD.
The HD works fine with 2.5 3.0 and 3.1 rom images. 3.5 rom works with AIAB software. |
![]() |
![]() |
#5 |
Junior Member
Join Date: Dec 2002
Location: The Streets
Age: 40
Posts: 2,731
|
![]()
Where did you get this 3.5 rom from exactly?
|
![]() |
![]() |
#7 |
RIP Friends
Join Date: Sep 2005
Location: UK
Posts: 2,157
|
Ignore my last message as I corrupted the startup-sequence
The HD works fine with the 3.5 rom. I still do not know why these people are having problems ![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,648
|
That 3.5 rom is a hacked 3.1 rom... There is no such thing as a 3.5 kickstart rom.. they should remove it. I am not surprised that nothing works if you use that image.
|
![]() |
![]() |
#9 |
RIP Friends
Join Date: Sep 2005
Location: UK
Posts: 2,157
|
Akira
Akira. I deleted that 3.5 rom yesterday, as I noticed no difference. I had a feeling it was a hacked rom.
|
![]() |
![]() |
#10 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,648
|
Good, you were wasting valuable HD space with that shite
![]() |
![]() |
![]() |
#11 |
http://www.amigaclub.be/
|
![]()
I need help too. I wanna use an existing 3,5" Maxtor on my pc to use as an Amiga harddisc formatted in Amiga mode to use on my A2000 later. I did the following :
"To get your physical hard drive to work in WinUAE simply launch the emulator using the configuration you like best, insert your Workbench ADFs into the floppies tab and then click the Hard Drives tab, make sure you click "Add PC drives at startup" and press OK to start. When Workbench loads you will notice that your PC hard drive(s) and CD-ROM(s) are loaded for ya." Floppies are mounted, HDtoolbox loaded and changed the scsi.device to uaehf.device but no harddrive detected ![]() Fact is that in the configuration menu when I select the harddrive that I do not want to use anymore under XP then I get the error "warning : the drive safety check is active. Selected drive is not empty and non-RDB partitionned" ![]() I have done some searching, even changed the 3.1 roms but same result. All my pc partitions are showing up on Workbench boot, that´s not the problem. I just want to format a 250 Gb Maxotr under FFS, or at least the first 2 Gb to start with ... please give me the clue that I´m missing ![]() EDIT : I am using WinUAE 1.5.0 and 3.1 floppies in adf |
![]() |
![]() |
#12 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,553
|
Try finding some newer (much newer) thread first, real HD support wasn't even available when this thread was created
![]() (or just read readme.txt that comes with winuae) |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS-UAE boot on hard drive | joufflu | support.FS-UAE | 3 | 13 May 2012 17:12 |
Another FW hard drive/UAE question | lofstudio | support.WinUAE | 13 | 19 March 2009 19:08 |
Project: Adding a CF Drive as an Hard Drive to an A500 | mfletcher | support.Hardware | 8 | 03 July 2008 00:20 |
Compact flash drive Vs. 2,5" hard disk drive | fc.studio | support.Hardware | 5 | 16 June 2007 16:40 |
Amiga hard drive on uae question! | ElectroBlaster | support.WinUAE | 6 | 28 May 2003 21:01 |
|
|