21 January 2012, 13:39 | #1 |
Zone Friend
Join Date: Jan 2004
Location: Norway
Age: 46
Posts: 987
|
A1200 RGB problem
Connected my Amiga 1200 to my LCD via RGB cables, but I only get a light grey screen. I can very vaguely see the icons if I look closely, but that's it. It boots as normal though, and it works fine via the composite (haven't tried RF and don't intend to).
Anyone have a clue what it can be, and how I can make it work? |
21 January 2012, 13:42 | #2 |
BlizzardPPC'less
|
Try another scart-plug on your TV. It might be the one you're using isn't fully scart-wired, missing signals.
|
21 January 2012, 13:44 | #3 |
Zone Friend
Join Date: Jan 2004
Location: Norway
Age: 46
Posts: 987
|
Don't have any others that can be used on my Amiga...
|
21 January 2012, 14:13 | #4 |
Zone Friend
Join Date: Jan 2004
Location: Norway
Age: 46
Posts: 987
|
I've tried three different Scart ports on two different TVs. My LCD shows only light grey where I can make out the image extremely vaguely, while a small 14inch CRT shows only a black screen. The LCD have been working with RGB for a long time, just not with my Amiga.
|
21 January 2012, 15:12 | #5 |
BlizzardPPC'less
|
There's something wrong with your rgb-cable maybe. Do you have another one that you could test with? My Sony lcd displayed Amiga screen nicely with a scart-cable (though I prefer the good' ol tube crt-tv )
|
21 January 2012, 15:17 | #6 |
Zone Friend
Join Date: Jan 2004
Location: Norway
Age: 46
Posts: 987
|
No other Amiga and no other cables, unfortunately. Could it be the port? It looks like it's supposed to work, but the image just come out properly.
|
21 January 2012, 15:35 | #7 |
BlizzardPPC'less
|
You could measure the rgb-port with a multimeter, but how, that's another story. Maybe someone else could help with this?
|
21 January 2012, 15:56 | #8 |
Zone Friend
Join Date: Jan 2004
Location: Norway
Age: 46
Posts: 987
|
Unfortunately, I don't have fancy stuff like a multimeter. In fact, don't even know what it is.
|
21 January 2012, 17:50 | #9 |
Registered User
Join Date: Apr 2007
Location: Belgrade
Posts: 567
|
I'm certain its pin 16 (blanking). you need 1–3 Volts for RGB.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Amiga A1200 RGB & composite video problem solution! | Anemos | support.Hardware | 24 | 24 September 2015 08:36 |
A1200 video port RGB problem | Toof | support.Hardware | 15 | 19 March 2013 05:27 |
RGB signal problem | Amiten | support.Hardware | 7 | 03 September 2011 22:40 |
A1200 RGB Video Problem | darkwave | support.Hardware | 20 | 16 May 2008 21:01 |
rgb cable problem | stuntpup | support.Hardware | 25 | 07 October 2007 15:20 |
|
|