The Plague (by CLS) resets after walking a few steps

apachacha · 18 July 2011, 11:46

Yeah, sorry to be making this other inquiry so soon, but the other game I got doesn't seem to work either. It loads up correctly, but then when the game starts I move a few steps and the whole thing suddenly resets just as the screen starts to scroll.

TCD · 18 July 2011, 12:29

Use the A500 most common quickstart and set the compatibility slider to 'Best compatibility'. Works fine here.

apachacha · 18 July 2011, 15:41

Okay, I did that, beat the first level boss and.....after that the game doesn't continue, instead the screan keeps flashing different colours.

Any idea what the hell just happened ?

Retro-Nerd · 18 July 2011, 15:43

Insert Disk 2?

apachacha · 18 July 2011, 15:44

Quote:

Originally Posted by Retro-Nerd

Insert Disk 2?

Tried that, nothing much seems to change.

Also, change disk after finishing only the first level ?

edit: yeah, I just get a screen with one colour, that simply switches between brown and pink and green and red etc.

Retro-Nerd · 18 July 2011, 15:46

Not that unusual, mostly flashing colors indicates a disk change. Haven't tried this crack though.

apachacha · 18 July 2011, 15:48

Quote:

Originally Posted by Retro-Nerd

Not that unusual, mostly flashing colors indicates a disk change. Haven't tried this crack though.

Is there any other ? Because even the one game I already finished (Apidya) had a bad 2nd disk that caused software failures.

Retro-Nerd · 18 July 2011, 15:58

There are different TOSEC images. I've just uploaded the images from Gamebase Amiga. Check the Zone.

apachacha · 18 July 2011, 16:03

Quote:

Originally Posted by Retro-Nerd

There are different TOSEC images. I've just uploaded the images from Gamebase Amiga. Check the Zone.

Edit: oh wait nevermind......checking out now

Retro-Nerd · 18 July 2011, 16:04

Try the PAL Fullscreen Original (extended ADFs) too.

TCD · 18 July 2011, 16:05

Why not simply using DF1 for the second disk?

apachacha · 18 July 2011, 16:13

Quote:

Originally Posted by TheCyberDruid

Why not simply using DF1 for the second disk?

Hmm ?

Also, oddly enough, the ones RN just posted.....they crash if you try loading state.

Could this be caused by the fact that my WinUae does not actualy have a A500/2000 mode, but only a 500 one ?

Retro-Nerd · 18 July 2011, 16:16

Do you use the latest WinUAE version?

apachacha · 18 July 2011, 16:18

Quote:

Originally Posted by Retro-Nerd

Do you use the latest WinUAE version?

Latest I found on the downloads section.

Also, I just want to play the game, but I stil get that static colour screen and not even changing the disc will make it go away.

Also, the PAL version ? Extended ? As in.....you can get that somewhere ?

TCD · 18 July 2011, 16:18

Quote:

Originally Posted by apachacha

Hmm ?

Just use two disk drives. The crack text screen even mentions the flashing screen if you only use one disk drive.

apachacha · 18 July 2011, 16:19

Quote:

Originally Posted by TheCyberDruid

Just use two disk drives. The crack text screen even mentions the flashing screen if you only use one disk drive.

Thing is I use both or change the disc but.....the colour screen doesn't go away.

AmigaFriend · 18 July 2011, 16:20

Quote:

Originally Posted by apachacha

Could this be caused by the fact that my WinUae does not actualy have a A500/2000 mode, but only a 500 one ?

Is your WinUAE old? Because:

Retro-Nerd · 18 July 2011, 16:21

Quote:

Originally Posted by apachacha

Thing is I use both or change the disc but.....the colour screen doesn't go away.

Just tried the Gamebase Amiga version. Loading and savestates works fine here.

Quote:

Also, the PAL version ? Extended ? As in.....you can get that somewhere ?

It's in the Zone too, try it.

TCD · 18 July 2011, 16:33

Using :
Plague, The (1990)(Innerprise)(Disk 1 of 2)[cr CLS] - CRC32: 6785EF4B
Plague, The (1990)(Innerprise)(Disk 2 of 2)[cr CLS] - CRC32: 1FEA29EA
in DF0: and DF1: with the A500 most common quickstart and best compatibility on WinUAE 2.3.2, I got to level 2 without any problems. Do you wait long enough when the screen flashes?

apachacha · 18 July 2011, 16:36

Okay guys, level two seems to work now. Not realy sure what happened, though it might be RN's files from the Zone, because I do remember using both files of the cracks I had at some point and the problem stil persisting.

@ Xpect: That's the one I have, I think, just that I was going by the guide here

http://guide.abime.net/gguides/winuaea.htm

So I was a little confused. In fact I was even more confused because the version I used up till now was 0.8.22.2 and there wasn't any such thing as a "quickstart" option there

So thanks guys, realy apreciate the help, and please, bear with me, I'm completely new to working out Amiga, so I might stumble a bit.

Quote:

Originally Posted by TheCyberDruid

Using :
Plague, The (1990)(Innerprise)(Disk 1 of 2)[cr CLS] - CRC32: 6785EF4B
Plague, The (1990)(Innerprise)(Disk 2 of 2)[cr CLS] - CRC32: 1FEA29EA
in DF0: and DF1: with the A500 most common quickstart and best compatibility on WinUAE 2.3.2, I got to level 2 without any problems. Do you wait long enough when the screen flashes?

I think I put the old files in through Quickstart, could that have influenced it not working any ? Oh and I waited, it's just that all I was treated to was an orchesta of primary colours :P

Thanks once again for help man.

18 July 2011, 11:46	#1
apachacha Registered User Join Date: Jul 2011 Location: Czech Republic Posts: 158	The Plague (by CLS) resets after walking a few steps Yeah, sorry to be making this other inquiry so soon, but the other game I got doesn't seem to work either. It loads up correctly, but then when the game starts I move a few steps and the whole thing suddenly resets just as the screen starts to scroll.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Demo with Popcorn song & Odie walking across screen?	mips	request.Demos	2	21 January 2013 11:22
Cancelling load config file requester resets emulation	mark_k	support.WinUAE	2	18 February 2012 09:34
Sound emulation resets to enabled when switching quickstarts	TCD	support.WinUAE	1	19 July 2011 15:52
priority resets after reset	jrom	support.WinUAE	0	10 April 2004 16:05
Found -> D/Generation (Was: Walking in building game)	Ziaxx	Looking for a game name ?	5	24 November 2002 22:09

18 July 2011, 12:29	#2
TCD HOL/FTP busy bee Join Date: Sep 2006 Location: Germany Age: 46 Posts: 31,522	Use the A500 most common quickstart and set the compatibility slider to 'Best compatibility'. Works fine here.

18 July 2011, 15:41	#3
apachacha Registered User Join Date: Jul 2011 Location: Czech Republic Posts: 158	Okay, I did that, beat the first level boss and.....after that the game doesn't continue, instead the screan keeps flashing different colours. Any idea what the hell just happened ?

18 July 2011, 15:43	#4
Retro-Nerd Missile Command Champion Join Date: Aug 2005 Location: Germany Age: 52 Posts: 12,435	Insert Disk 2?

18 July 2011, 15:46	#6
Retro-Nerd Missile Command Champion Join Date: Aug 2005 Location: Germany Age: 52 Posts: 12,435	Not that unusual, mostly flashing colors indicates a disk change. Haven't tried this crack though.

18 July 2011, 15:58	#8
Retro-Nerd Missile Command Champion Join Date: Aug 2005 Location: Germany Age: 52 Posts: 12,435	There are different TOSEC images. I've just uploaded the images from Gamebase Amiga. Check the Zone.

18 July 2011, 16:04	#10
Retro-Nerd Missile Command Champion Join Date: Aug 2005 Location: Germany Age: 52 Posts: 12,435	Try the PAL Fullscreen Original (extended ADFs) too.

18 July 2011, 16:05	#11
TCD HOL/FTP busy bee Join Date: Sep 2006 Location: Germany Age: 46 Posts: 31,522	Why not simply using DF1 for the second disk?

18 July 2011, 16:16	#13
Retro-Nerd Missile Command Champion Join Date: Aug 2005 Location: Germany Age: 52 Posts: 12,435	Do you use the latest WinUAE version?

18 July 2011, 16:33	#19
TCD HOL/FTP busy bee Join Date: Sep 2006 Location: Germany Age: 46 Posts: 31,522	Using : Plague, The (1990)(Innerprise)(Disk 1 of 2)[cr CLS] - CRC32: 6785EF4B Plague, The (1990)(Innerprise)(Disk 2 of 2)[cr CLS] - CRC32: 1FEA29EA in DF0: and DF1: with the A500 most common quickstart and best compatibility on WinUAE 2.3.2, I got to level 2 without any problems. Do you wait long enough when the screen flashes?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)